Complete VIN decoder

Started by alwayzbroken, February 07, 2008, 07:48:12 PM

0 Members and 2 Guests are viewing this topic.

alwayzbroken

I am looking for a chart or website that has a complete VIN decoder for Toyota trucks and 4Runners. I have found a few online but nothing that gave real complete information. The one on 4Crawler does not work on my VIN :dunno: Thanks.
If you still have control you aren't going fast enough

*** YELLER ***

this would be nice to have im gonna keep this as a fav.



:usa: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

REG535

Ok if you go to 4x4wire.com and under toyota faq and somewhere around there is codes for just about everything, not sure what your looking for but it gives base models, what where made and what were changed plus gives you a thing to decode your code off your truck and see what you got. Does this help?  :greengrin:
85 Marble' Black and White (x-cab)
84 RedTurtle' Red with White Top added Marlin Turtle Shift Knob (All Stock) :silly:


79toy


Duffil


79toy

i have a 91 pickup and it recognized mine... :headscratch:

SocalWheeler71

There's one on 4x4wire somwhere in the Toyota section.

ninja turtle

dose anybody know if there is a place to check a 79. i looked and tryed the links above but nothing. my 79 only has 10 numbers in the vin.

alwayzbroken

If you still have control you aren't going fast enough

YotaJosh

Quote from: no-idea on February 09, 2008, 10:46:53 AM
dose anybody know if there is a place to check a 79. i looked and tryed the links above but nothing. my 79 only has 10 numbers in the vin.

That type of VIN is really just a model+serial number. It doesn't describe any of the features of the truck like newer VIN's do. You have to use the plate under the hood to determine engine, trans, axle, etc.
'79 Short Bed Pickup 4x4
'04 4Runner V8 Sport 4x2

79coyotefrg

Quote from: no-idea on February 09, 2008, 10:46:53 AM
dose anybody know if there is a place to check a 79. i looked and tryed the links above but nothing. my 79 only has 10 numbers in the vin.
what do you need to know??  G102= 4.37 R&P ,  L43 = 4speed side shift trans,

then theres the paint codes  and  engine,  cant remember what else :headscratch:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Shoyrtt

It was cool to find out the Runner was built in Tahara, Japan. 8)
http://www.city.tahara.aichi.jp/en/index.html
JOIN THE BLUE RIBBON COALITION!

http://www.sharetrails.org/

bad luck


Rocksurfer

#13
Quote from: YotaJosh on February 11, 2008, 07:50:31 PM
That type of VIN is really just a model+serial number. It doesn't describe any of the features of the truck like newer VIN's do. You have to use the plate under the hood to determine engine, trans, axle, etc.

That's not true, sure you don't get as much info on earlier VIN's but there is some info there like where it was made and if it were a special edition vehicle but that's about all you can get from them. Even some late model VIN's can be vague though, as an example there is no digit on the Buick Regals to denote which one is a GNX (Grand National) and which one is just a plain Regal. Kinda sucks in determining if it is a fake or not, but it does hide what it is from your insurance.
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

ninja turtle

Quote from: YotaJosh on February 11, 2008, 07:50:31 PM
That type of VIN is really just a model+serial number. It doesn't describe any of the features of the truck like newer VIN's do. You have to use the plate under the hood to determine engine, trans, axle, etc.
thanks, but i dont have the stock hood. 
Quote from: 79coyotefrg on February 11, 2008, 07:53:11 PM
what do you need to know??  G102= 4.37 R&P ,  L43 = 4speed side shift trans,

then theres the paint codes  and  engine,  cant remember what else :headscratch:
nothing really, just wanted to see. it was cool looking at my other cars. thanks geln!

Rocksurfer

#15
On early models there should be a VIN tag that will tell you almost anything you need to know, at least my chevy's did. I had a 66 Chevelle the VIN tag told told me that it was a coupe and should have a 327 engine, hydroglide trans and it was originally painted forest green. Not only that it will even tell you the month and week it was built. Looking at the vehicle comfirmed these few listed items, it came with split buckets and a center shift console with the dual bar lever, had no window frames, just not having window frames in itself denotes that it is a coupe, which is the platform a SS is made from. It's been a long time since I was into retro cars and would really have to bone-up on the codes within the tags but I was able to narrow down what I had by that tag. Not all the info on old cars came within the VIN # itself so you have to read and decifer those extra numbers and letters on the tag that don't have anything to do with the VIN itself.

My Chevy Elcamino told me it was a SS 454 with a 4 speed,color was black and it was a stripe delete. Sadly when I got it the 454 and the trans were long gone.
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

79coyotefrg

Quote from: no-idea on February 12, 2008, 08:13:51 AM
  thanks, but i dont have the stock hood.   nothing really, just wanted to see. it was cool looking at my other cars. thanks geln!
under the hood,  NOT  under  side of the hood,   its actually  on the  pass side  inner fender  ,  and on the  firewall tag just behind the valvecover
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

twistedtoy92

alldata, mitchell.......... those have decoders!!! we've gottem here in the auto tech shop!!! pretty damn handy!!!
2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi
1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982
1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251
1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263

"TRIPLE CASES GETS YOU LAID." -BigMike

"I daily drive this thang everyday." (swapped89)

Cracker

Like a few people already said, any online VIN decoder will only work with the newer 17 digit VIN numbers.
Thats pretty much from 2nd gen PU's, 4runners, and FJ60's and later. For the 1st gen PU's and FJ40/55's, and anything else pre-1981, the only thing the VIN will tell you is the model number and serial number. For more detail, you have to decode the numbers on the underhood plate.

I have dealer parts microfiche for the 1st gen PU's, FJ40/55's, 2nd gen PU's  & 4runners, and a few other Toyota models. There is a list on the fiche that breaks everything down.

An example is my 1st gen PU is something like RN37L-TMKR.  This is what will REALLY tell you more about the vehicle than your VIN.
Art

99 Taco
80 Hilux - 20/22R Hybrid, Dual Mikuni's, R151 trans, Budbuilt X-member
74 FJ40 "The Project"


WHITE_TRASH

Damned thing doesn't even mention one t-case being in my truck let alone 2 of them...  I think that decoder is busted...  :gap:
Full hydro, 186:1 with an auto and 44's what could go wrong??

jimbo74

Quote from: Cracker on March 12, 2008, 05:01:24 PM
I have dealer parts microfiche for the 1st gen PU's, FJ40/55's, 2nd gen PU's  & 4runners, and a few other Toyota models. There is a list on the fiche that breaks everything down.

want to look up mine for me? its an rn66-msca
:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~

unclejpl4x4

#21
wow cool I found the ? 2 my answer i have a DLX   but is it worth the 4$ for the full report ?
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly