Hirunner

Started by Bazzi, May 31, 2004, 09:00:27 AM

0 Members and 1 Guest are viewing this topic.

Bazzi

I am starting to build up my doublecab.  :confounded:
The plan is to take off that doublecab boddy and put a 4runner boddy instead
In the same time I will putt a 4link suspencion in the rear and a landcruiser suscpencion in the front.  (spiral suspension)  not (laminated springs).    :conf:
The only problem is the steering I belive that I can use Marlins Hi-steering kit but I am not sure that Marlin sends to offshore ??

another prob. the shifter of the second dualcase, I want it to come through the floor in the exactly same place as in this picture

http://www.marlincrawler.com/docs/dualcase/0440.jpg

Is it possible for Marlin to make exactly that same system and send it to me ??   (To Iceland)

With regards from Iceland
4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

WHITE_TRASH

Im sure Marlin can send stuff to Iceland as hes shipped to Australia many times.  It would be easy to duplicate the shifter setup in the picture you linked.
Full hydro, 186:1 with an auto and 44's what could go wrong??

Bazzi

The runner right now
4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

Hyena

Why are you planning on putting that cab on anyways?

Bazzi

#4
just more confort  and allso the old one has lots of rust in it
4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

84runner

That truck is AWSOME Bazzi  :bowdown:  :bowdown:  :bowdown:  :bowdown:  :bowdown:  :bowdown:  :bowdown:  :bowdown:
RUBICON TESTED BIG BALLS APPROVED

81Toy4x

i also must say that, that double cab is way coller than the 4runner. wish we had those out here. (this is 86runner-sas)

Bazzi

But it is so messet up and I am tired of allways carrying the extra tire and about 300 l of fuel for every one.
4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

Skinny_Pedal

dude i understand that your not from here, but i didnt just get what u just said
Im an OG

Bazzi

Quote from: Bazzi on June 15, 2004, 03:01:23 PM
But it is so messet up and I am tired of allways carrying the extra tire and about 300 l of fuel for every one.


But it is so messet up = the truck
I am tired of allways carrying the extra tire = spare wheel (tier)
and about 300 l of fuel for every one.  = few pickups, everyone are allways asking me to carry some extra fuel for them, and I am allways a badguy for saying No
4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

Bazzi

ok I got the 4runner home now I am tending on rust and thinking about the best way to modify it.

probl. so far steering.  to many regulations here so I wont go into that here
the 4runner has a 30 cm shorter wheel base than the Hilux 
and a few more minor probl. that will probably sort out later in the progress.

wish me good luck
4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

brainlessfool

good luck Bazzi, and may the viking cat overlords smile down on you!   :psss:
A good day working, that's just sick :reg:

Hyena

I think that double cab is awsome also.

Bazzi

I am trying to find out what year my 4runner is .... Does anyone know about the differences in the years 89-93  what I should look for it has been taken off the record, so  this is the only way for me..... need help pleace.....  It is a 3.0 V6 4runner
4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

b_ripper8

Your 4-Runner looks like a 92-93, but seriously, that double cab is one of the coolest things I've seen in a while.
In Progress: 3RZ-FE Swap Underway.

Currently: 87' 4Runner - SAS - 5.29's - welded rear - Dual 2.28 cases - Optima bluetop - round headlight conversion - FZJ80 grill - rattlecan paint job - trimmed fenders - Ranger hybrid springs front - Tacoma hybrid springs rear - schedule 160 drivelines 8" slip front - Marlin's crossmember - disk brake conversion

Bazzi

stop rubbing it in     :rivers:
4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

84runner

I'm not really sure how to tell myself , but I would think some interior pieces would have changed throught the years even if the body style hasn't. I know it don't tell you what but hopefully helps you find something to look for :thumbs:
RUBICON TESTED BIG BALLS APPROVED

Bazzi

I am looking for something like that. are there speakers with a orginal amplyfier in the back in all the models.  or something like that????
4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

Bazzi

#18
I have been way to busy at work since I got the runner so there hasn´t been that much work done on it but I have cleared most of the rust and am starting the rebuilding now I have cutted the fire wall in the front for the tires and next up is to reweld the body  :flamer: 

I must start thinking about what kind of setup I will use for flexing so I can order the parts so it will be ready in time.... Any ideas???


here are some pics   (sorry about the focus I don´t know what is wrong with that camera)
4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

Bazzi

the fyrst one  is of the rear wheel base.

the second one is of my evil guard dog that will kill all the viking cats that will come after me or my truck
4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

Bazzi

#20
here is what I cutted out of the front fire wall. before and after
4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

Bazzi

mabe a bit to much but if you weld it right back to getter it would be as strong as original
4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

mudguts

#22
Quote from: Bazzi on July 28, 2004, 05:28:37 PM
mabe a bit to much but if you weld it right back to getter it would be as strong as original
Hey Bazzi, if you leave that hole, you'll never need a spotter :hahaha:

Keep us updated  :beerchug:
:nerv:                                                                                               :turtle: I love T.I.T.S. :turtle:

84runner

well you have jus got after that thing  :thumbs: and those pics made me nasious  :chew: That dog of yours has an evil look in his eyes are you sure he can be trusted ?
RUBICON TESTED BIG BALLS APPROVED

Bazzi

the dog is trained to kill all viking-cats. Just before I snapped that pic I called out viking_cat = evil look ;)


4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

Bazzi

wow after the whole week I could add 2 more hours in the runner .... here is the result. Icutted out the left side of the furewall, and started to rebuild it.

uset a camera from work and got a litle better pics

in the pic you can see 3 of my favorite tools the big hammer is missing
4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

Prismo

Quote from: Bazzi on July 09, 2004, 05:21:18 AM
I am looking for something like that. are there speakers with a orginal amplyfier in the back in all the models.  or something like that????
There were amplified speakers in the back of my 90 when I bought it. The new body style started in the very last of 1989 over here. I have no idea what the progression was in your area. Do the newer 4-Runner/Surf in your area have the third brake light on the roof? I think they started installing that feature here in 92 or 93.
Retired Great White Turtle Hunter
Originally posted by fortysixandtwo – sheesh, you should see the transvestites i sell ammo to sometimes

Bazzi

I have not notices the third brake light.... But I found out that this car is late 90
4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

Bazzi

finally got some work done tonight
here is how I closed the fierwall on the right side
4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

Bazzi

test fitted an 36" richard cepec
4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs