atoyoT 4-Runner SAS

[Loosekannon]

Thats where he is from, he is in the USMC.

[atoyot]

whats up with the maui built sticker??? 

i from maui born and raised in napili

[atoyot]

i need help on what cross member i should get. is the budbuilt budlight a good choice over the high clearance crossmember from fror or the other way around?

[THK Matt]

depends on your fab skills I have none and I'd get the BudBuilt Budlight, for myself.

[atoyot]

depends on your fab skills I have none and I'd get the BudBuilt Budlight, for myself.

so you gotta do a little fabricating for that high clearance crossmember?

[motorider228]

Good to see the build is still going Max.  I kick myself for letting that runner go sometimes.  I leave for Air Force basic in nine days though so I'll be buying something after tech school.  Are you back from Iraq now? 

[atoyot]

Good to see the build is still going Max.  I kick myself for letting that runner go sometimes.  I leave for Air Force basic in nine days though so I'll be buying something after tech school.  Are you back from Iraq now? 

thanx for selling me that runner man. its been running good and no problems so far. im still here in iraq i get back in jan or feb. good luck in the air force. im getting out in april so no more military for me. but yeah i still got the duals and the tranny to do and some drive shaft work(getting it done when i get back), other than that it should be done i think.

[motorider228]

That time will come quick.  My cousin is a Cpl. and is on his 3rd tour and can't wait to come home and be done with the Corps.  Good to hear with the runner, keep this thread updated, I'll make sure to check back from time to time when I'm in tech school.

[atoyot]

for sure i ll keep this updated.

[atoyot]

what kind of measurements do i need to get a rear drive shaft made? and how much do they usually cost?

[THK Matt]

flange to flange measurement.
100-300 bucks probably.

[Joey88RUNR]

I took in and extra front cvjoint from a front ifs drivline, had them clearance it for more angle and shorten it and set it all up , it was like 200 bucks, for my 4runner i think it was 41" flange to flange i think, after duals.

[atoyot]

thanks

[THK Matt]

I took in and extra front cvjoint from a front ifs drivline, had them clearance it for more angle and shorten it and set it all up , it was like 200 bucks, for my 4runner i think it was 41" flange to flange i think, after duals.

awesome I need to get mine brought in.
cause 2WD in the winter will suck up here.

[atoyot]

i still need help on deciding what cross member i should get. i m thinking of going with the fror or allpros x member with parking brake due to my rear brakeline issues.  what are the pros and cons of each? help please. thanks

[atoyot]

ill be back from iraq and in cali soon. i should be ready to get everything installed. i already got the adapter plate with the 4.7 gears and a foward shift tcase waiting for me
the things i will order soon:
tranny w56c
hd clutch
allpro triple x member
and some drive shaft work when everythings installed
anything else you guys could think of?
will i also need a tcase mount also?

[atoyot]

i just got back from iraq and im almost ready to do my duals. btw
there was and still is a problem with my thorley headers and i was wondering if anyone could help me out... the problem is that there is this hole right in the middle of the header(between the two bottom middle studs) and air is just blowing out of it , im not sure if its supposed to be plugged up, if it is what size bolt will plug it up. im pretty sure its supposed to be plugged up but i dont remember a bolt being there on the stock header. help please thanks

[boggerunner]

does an o2 sensor go there?

[4runner17]

you should check out sky-manufacturing crossmember.

[Loosekannon]

i just got back from iraq and im almost ready to do my duals. btw
there was and still is a problem with my thorley headers and i was wondering if anyone could help me out... the problem is that there is this hole right in the middle of the header(between the two bottom middle studs) and air is just blowing out of it , im not sure if its supposed to be plugged up, if it is what size bolt will plug it up. im pretty sure its supposed to be plugged up but i dont remember a bolt being there on the stock header. help please thanks

Thats odd, I don't remember anything like that on mine  Put a picture of it up.

Glad to here you made it back alright, I hope to be out of here next week sometime 

[atoyot]

Thats odd, I don't remember anything like that on mine  Put a picture of it up.

i fixed that problem i just plugged that hole with a bolt and it worked fine, now it sounds way better. i also bought a tranny but its not forward shift. so i dont think i might need jasons t-case,i got the one i bought a while back so i think im set.

[atoyot]

I finally got my triple xmember from allpro last week. now i just need a new clutch i think.

[motorider228]

Any new pictures or updates?  I'm finally out of tech school and at my first duty station in Italy so I can get back online now.  You said earlier you got out of the Corps in April, congrats on that.