The official rig height thread

[MR_DIY]

I measured my rig last night on my flat concrete floor.


it's 22" to the front spring hanger and 24" to the tcase skid/frame at the door.  LOW if you ask me 

[MiniSimp]

Still waiting for measurments for a stock pickup/4runner

[MR_DIY]

Still waiting for measurments for a stock pickup/4runner

about the same as mine LOL   

[MiniSimp]

BACK TO THE TOP FOR THE NEWBS!

Post up your measurements:

Copy and paste this in your post

Make -
Year -
Model -
Height to front spring hanger -
Height to very rear of frame -
Height to bottom of frame under door -
Height of transfer case skid plate (or just case if no skid) -
Height of tires at "X"PSI -
Height to bottom of front diff -
Wheelbase -

If anyone has a bone stock solid axle pickup or 4runner PLEASE POST UP!

[Travota]

Make - toy
Year - 85
Model - LBPU
Height to front spring hanger -26
Height to very rear of frame -34
Height to bottom of frame under door -25
Height of transfer case skid plate (or just case if no skid) -20.5
Height of tires at "X"PSI - 35@30
Height to bottom of front diff -12
Wheelbase - 115

I'd like to lower it about 2-3inches and make a flat belly

[TopStreet]

Just got done mismatching a bunch of parts together to do my SAS. Although I spend more of my time on the road and in the mud, I was running out of inner fender to cut (for bigger tires) soooooo...... I have some new numbers for the list.

Make - Yoda
Year - 1990
Model - std cab
Height to front spring hanger - 25.25"
Height to very rear of frame - 33.75"
Height to bottom of frame under door - 28"
Height of transfer case skid plate (or just case if no skid) - 21.75" (still stock)
Height of tires at "X"PSI - 34.25" @ 25psi
Height to bottom of front diff -11.5" 
Wheelbase - 105

[MarkyB]

Make - Toyota
Year - 1984
Model - 4Runner
Height to front spring hanger - 20 7/8 stock  22 1/2 now after tweaking fronts.
Height to very rear of frame - 26
Height to bottom of frame under door - 18 3/4
Height of transfer case skid plate (or just case if no skid) - 12 3/4
Height of tires at "X"PSI - 31.5 @ 26psi    'spose to be 33s
Height to bottom of front diff -10
Wheelbase - what ever a stock runner's is.

Note that except for my tweaked front springs everything is stock. 
All measurements are in inches.

[Rocksurfer]

On my new rig an 86 standard cab it's 75" to the top of the roof with a 4" lift and 33's. The torsion bars are not cranked in so I could get a little more if I decided to.

[93tonkatoy]

All stock suspension

Make - Toyota
Year - 1993
Model - Pickup
Height to front spring hanger - 20.5
Height to very rear of frame - 27.5
Height to bottom of frame under door - 19
Height of transfer case skid plate (or just case if no skid) -13(stock xmbr)
Height of tires at "X"PSI - 31.5@33psi
Height to bottom of front diff -11.5
Wheelbase - 103
Top of cab - 73.5

[MiniSimp]

All stock suspension

Make - Toyota
Year - 1993
Model - Pickup
Height to front spring hanger - 20.5
Height to very rear of frame - 27.5
Height to bottom of frame under door - 19
Height of transfer case skid plate (or just case if no skid) -13(stock xmbr)
Height of tires at "X"PSI - 31.5@33psi
Height to bottom of front diff -11.5
Wheelbase - 103
Top of cab - 73.5

Thank you!

[TopStreet]

Now with the 42's

Make - Yoda
Year - 1990
Model - std Cab
Height to front spring hanger - 29.5"
Height to very rear of frame - 37"
Height to bottom of frame under door - 30.25"
Height of transfer case skid plate (or just case if no skid) - 24.75"
Height of tires at "X"PSI - 40.5" @ 18psi 
Height to bottom of front diff -14.375"
Wheelbase - 105.5"

[TheTransporter]

Make - toyota
Year - 1990
Model - std cab
Height to front spring hanger - 29"
Height to very rear of frame - 39.75"
Height to bottom of frame under door - 29.5"
Height of transfer case skid plate (or just case if no skid) - 25"
Height of tires at "X"PSI - 36" @ 25psi
Height to bottom of front diff -12"
Wheelbase - 105

[854RUN]

Make - Toyota
Year - 1997
Model - T100
Height to front spring hanger - 28"
Height to very rear of frame - 36"
Height to bottom of frame under door - 29"
Height of transfer case skid plate (or just case if no skid) - 23"
Height of tires at "X"PSI - 36" @ 35psi
Height to bottom of front diff -12"
Wheelbase - 124

[Ramrod]

just looking at that chart somehow my measurements are totally wrong.  I'll have to measure it again sometime soon. 

[MiniSimp]

just looking at that chart somehow my measurements are totally wrong.  I'll have to measure it again sometime soon. 

Update your chit then!

Blue's are low
Yellow's are high
Pinks are close to average

[MiniSimp]

Updated!
And somebody sticky this please!

[Ramrod]

I cant really update it because it sits so croked right now.  I'll get some good stats to set the par once its linked.  Im shooting for a level stance at 24" to the frame with the 40's aired up

[Ramrod]

or maybe lower if I can do it

[MiniSimp]

I cant really update it because it sits so croked right now.  I'll get some good stats to set the par once its linked.  Im shooting for a level stance at 24" to the frame with the 40's aired up

That'll be

[854RUN]

OK, so I was looking at the numbers on my t100 and the rear frame is 36" not 38" my bad

[MiniSimp]

OK, so I was looking at the numbers on my t100 and the rear frame is 36" not 38" my bad

Thought that was a little high, I'll fix it on the next update.

[854RUN]

Thought that was a little high, I'll fix it on the next update.

that what i thought so i just ran out and remesherd and found, ya I f-ed up  , thanks Mini 

[DTB]

Finally got this for you Mini,

Make - Toyota
Year - 93
Model - Xtra cab
Height to front spring hanger - 29.0
Height to very rear of frame - 35.5
Height to bottom of frame under door - 28.0
Height of transfer case skid plate (or just case if no skid) - 22.5
Height of tires at "X"PSI - 35 @ 30 PSI   (36" swamper SX)
Height to bottom of front diff -12.5"
Wheelbase - 121"

[2slow2go]

Post up your measurements:

Make - Toy
Year - 93
Model - Runner
Height to front spring hanger - 30.5
Height to very rear of frame - 35.25
Height to bottom of frame under door - 29.25
Height of transfer case skid plate (or just case if no skid) - 23.5"   needs viagra
Height of tires at "X"PSI - 39.5 Irocs  38"@20# street press. 37"@5.5#
Height to bottom of front diff -12.25 Dana 60
Height to bottom rear diff. 12" dana 70u smooth
Width 82.5" front  81" rear
Wheelbase -112"

Brian

[Shamb]

Make - Toyota
Year - 1982
Model - Pickup
Height to front spring hanger - High
Height to very rear of frame - Higher
Height to bottom of frame under door - too high
Height of transfer case skid plate (or just case if no skid) - no clue but its high!
Height of tires at "X"PSI - ...i'd guess around 40-41" at 5 psi
Height to bottom of front diff - 14"
Wheelbase - 113"

[Plekto]

My turn - nothing very interesting.

Make - Toyota
Year - 87
Model - 4Runner
Height to front spring hanger - stock
Height to very rear of frame - stock
Height to bottom of frame under door - stock
Height of transfer case skid plate (or just case if no skid) - stock
Height of tires at "X"PSI - Dunno - BFG M/T one size larger than stock on 7 rims(previous owner used to run 3-4 inches bigger than stock). 235/75/15?  27 front, 35 rear. - will measure tonight.
Height to bottom of front diff - slightly taller than stock - will measure.
Wheelbase - stock(lol)

The interesting thing was that the truck was seriously lifted and modded at some point - there are all sorts of welds and anchor points all over the underside.  The second owner(my friend) had it returned to 100% stock.  And now I'm going to mod it a bit back when I get some more money...

[Lizard_lips]

Make - Toy
Year - 85
Model - Truck
Height to front spring hanger - 29.5"
Height to very rear of frame - 38.5"
Height to bottom of frame under door - 28.5
Height of transfer case skid plate (or just case if no skid) - 22.5"
Height of tires at "X"PSI - 38x15 boggers 36" high @ 8psi
Height to bottom of front diff - 12.5 Dana 44
Height to bottom rear diff. 11.5" 14 bolt kind shaved
Width 85.5" front  83.5" rear
Wheelbase -117"

[Homefries]

Make - Yota
Year - Stock 84
Model - Long bed Standard Cab
Height to front spring hanger - 24"
Height to very rear of frame - 31"
Height to bottom of frame under door - 19"
Height of transfer case skid plate (or just case if no skid) - 13"
Height of tires at "X"PSI - 31.5"
Height to bottom of front diff - 10"
Wheelbase - 113"

[jrock]

Make, Year, Model - Toy 85 x-cab

Height to front spring hanger - 24.5"
Height to very rear of frame - 31.25''
Height to bottom of frame under door - 21.75"
Height of transfer case skid plate (or just case if no skid) - 18"
Height of tires at "X"PSI - 33s at 35psi
Height to bottom of front diff - 9.75"
Wheelbase - 114.5" 

[MiniSimp]

Make, Year, Model - Toy 85 x-cab

Height to front spring hanger - 24.5"
Height to very rear of frame - 31.25''
Height to bottom of frame under door - 21.75"
Height of transfer case skid plate (or just case if no skid) - 18"
Height of tires at "X"PSI - 33s at 35psi
Height to bottom of front diff - 9.75"
Wheelbase - 114.5" 

Nice, You've got me by .25" as far as lift height. (FSH-HTBFD=lift)