Author Topic: Sold Now 1985Crawlers 1991 toyota (Read 124166 times)

Hyena · « **Reply #60 on:** Apr 12, 2007, 10:55:29 PM »

my t-cases hit the cab sometimes when i had it ontop of the plates. it just clearanced itself.

Rockcrawlintoy · « **Reply #61 on:** Apr 13, 2007, 07:25:46 AM »

ya maybe this weekend ill change it.

Drew

Rockcrawlintoy · « **Reply #62 on:** May 07, 2007, 03:22:19 PM »

Quote from: Hyena on Apr 02, 2007, 09:48:19 PM

hey, you should move that skid plate to the top of the side plates instead of underneath them. you will gain 3/4's of an inch of belly clearance!

i did it this weekend. i remember why i had it below. the exhaust hits the x member pretty good. im goin to keep it above the plates and hope nothin happens. i should be gettin some new 5150 shocks for the rear and gettin some shock hoops so i can mountmy swayaway coilover body shocks for the front. Once school is out ill go home and bust out some toob work finally

Drew

Shamb · « **Reply #63 on:** May 07, 2007, 04:48:27 PM »

I like my 14 bolt... and like you said.. spend a little cash and dont worry about it again. I've put it in some good binds and didn't worry about a thing.

Everyone ask's me "when you gonna shave that thing?"

My responce is simple.... "See all those rocks? yea... those'll do the shaving for me"

Rig's looking good, I need to get some 4.7's eventually for the rear case.

Rockcrawlintoy · « **Reply #64 on:** May 07, 2007, 07:15:52 PM »

ya thats what i am goin to do. 1000 for a 14 bolt and NEVER have to worry about it. the 4.7s are SO nice.

rednk1980 · « **Reply #65 on:** May 07, 2007, 11:15:27 PM »

This thing is sick, awsome build

brentlyw56 · « **Reply #66 on:** May 14, 2007, 09:37:22 PM »

hey drew this is brent at siskiyous lets do my rig already.. i need to bob it and i need to cut out the lower section from the rear wheel well back. i wanna do that

before i go to montana for the next two years. well let me know whats up man.

Rockcrawlintoy · « **Reply #67 on:** May 15, 2007, 04:52:02 PM »

i got some bling on my truck. my front shocks are old and suck and i only have one shock for the rear so i got some 5150s. they are for the rear but i mounted them in the front until i get new shock hoops. once i get new shock hoops ill put them in the rear and run sway aways hehe.

kiyul4130 · « **Reply #68 on:** Jun 15, 2007, 04:28:16 AM »

take a shittttttttts tyaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

kiyul4130 · « **Reply #69 on:** Jul 24, 2007, 01:35:16 AM »

updates?

Rockcrawlintoy · « **Reply #70 on:** Jul 24, 2007, 02:25:52 AM »

umm sliders are on well one is 100% and the other needs to be fully welded that should happen tomorrow. superiors and long joints coming soon.

DRew

Rockcrawlintoy · « **Reply #71 on:** Jul 24, 2007, 03:31:39 PM »

they are on. i should have pics tomorrow. im in chico without a camera. kiyul thanks for the help last night.

DRew

gtoyonrocks · « **Reply #72 on:** Jul 24, 2007, 09:40:24 PM »

I like your third gen, I have one that I have been working on for a while, I will have to post some pics, I really like your bumpers, they look really clean.

Rockcrawlintoy · « **Reply #73 on:** Jul 26, 2007, 10:52:00 AM »

thanks man

DTB · « **Reply #74 on:** Jul 26, 2007, 01:40:46 PM »

the mall crawlers looking good..

lilbuddy · « **Reply #75 on:** Jul 26, 2007, 07:13:57 PM »

Quote from: DirToyBoy on Jul 26, 2007, 01:40:46 PM

the mall crawlers looking good..

Hahaha

the albertsons parking lot crawler

finally got them on.... nice

DTB · « **Reply #76 on:** Jul 26, 2007, 07:23:16 PM »

Quote from: LILBUDDY on Jul 26, 2007, 07:13:57 PM

Hahaha

the albertsons parking lot crawler

finally got them on.... nice

haha yea sorry i meant the grocery getter

Rockcrawlintoy · « **Reply #77 on:** Jul 26, 2007, 10:33:24 PM »

lol yeah Grant was like dude u actually have a wheeler now, since sliders are like everyones first mod

Drew

lilbuddy · « **Reply #78 on:** Jul 27, 2007, 12:05:10 AM »

Quote from: Rockcrawlintoy on Jul 26, 2007, 10:33:24 PM

lol yeah Grant was like dude u actually have a wheeler now, since sliders are like everyones first mod

Drew

Haha

I need to call grant. i would rather do side jobs for him and

. i hate that place already. all i do is stand around. its cool but id rather work...

Rockcrawlintoy · « **Reply #79 on:** Jul 27, 2007, 12:24:09 AM »

Quote from: LILBUDDY on Jul 27, 2007, 12:05:10 AM

Haha

I need to call grant. i would rather do side jobs for him and . i hate that place already. all i do is stand around. its cool but id rather work...

ya dude i was helpin him on monday some chick drove 200 miles with her e brake on and caught he brakes on fire. u could have made some $$$

Drew

gtoyonrocks · « **Reply #80 on:** Jul 27, 2007, 08:27:44 AM »

That's a nice truck. I have a SASed 3rd gen extra cab, it's nice and clean looking like yours. It's my daily driver. Nice ride.

bigarms23 · « **Reply #81 on:** Jul 27, 2007, 10:27:13 AM »

looks great

onecrazyblackredneck · « **Reply #82 on:** Jul 29, 2007, 04:59:31 PM »

sweet rig

Rockcrawlintoy · « **Reply #83 on:** Jul 29, 2007, 07:04:11 PM »

thanks for all the comments

DRew

Rockcrawlintoy · « **Reply #84 on:** Aug 03, 2007, 05:27:50 PM »

Well i decided not ot built the 14 bolt yet. i thought that getin alloy shafts and long joints would be better for the front end since im 223:1 with 40s. so the longs are on the way and i should have the stub shafts ordered at the ned of next week

Drew

Rockcrawlintoy · « **Reply #85 on:** Aug 08, 2007, 11:22:41 PM »

well the longs are here! superior alloy shafts should be ordered tomorrow.
so im makin a list of crap i need to do for the round up so i dont forget

alloys and longs ordered and installed
change fluids
change front shackle bushings
rock lights
replace stripped stud in the rear and install kiyuls spacers.
make new drive like in the rear for wheelin

i think thats it for now

Rockcrawlintoy · « **Reply #86 on:** Aug 17, 2007, 09:14:50 PM »

i got my superior stub shafts today and i should be able to order my inners next week

DRew

Shamb · « **Reply #87 on:** Aug 17, 2007, 09:41:41 PM »

get that SH*T together! we've got some wheelin' to do.

lookin' good.

kiyul4130 · « **Reply #88 on:** Aug 17, 2007, 09:47:45 PM »

Quote from: Rockcrawlintoy on Aug 08, 2007, 11:22:41 PM

replace stripped stud in the rear and install kiyuls spacers.

what boy! im goin wheelin to!

least i hope...

Rockcrawlintoy · « **Reply #89 on:** Aug 25, 2007, 12:03:55 AM »

look what the man in brown dropped off. i got superior inners and outers with the 300m long joints the rubicon is callin my name

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Related Topics