Author Topic: Sold Now 1985Crawlers 1991 toyota (Read 124217 times)

Rockcrawlintoy · « **Reply #30 on:** Jan 03, 2007, 11:24:58 PM »

its a narrowed 44. its narrowed 4 inches on the long side and uses a 1980s and newer long side shaft and the short side is still stock. it does make the spring hanger at 27.5 inches so its a little narrower then toyota

DRew

toyo487 · « **Reply #31 on:** Jan 11, 2007, 08:54:25 AM »

I like your rear bumper did you make it or buy it? your truck is awsome

Rockcrawlintoy · « **Reply #32 on:** Jan 15, 2007, 06:56:26 PM »

well i got some 4.7s for it and i should have hydro assist by the end of next month.

Drew

alwayzbroken · « **Reply #33 on:** Jan 15, 2007, 11:25:55 PM »

What springs are you running? Have you broke anything with those meats?

toy4x4ota · « **Reply #34 on:** Jan 16, 2007, 07:59:42 AM »

if you could post a picture of the side view of the front bumper that would be great. i really like but i want to see how far it sticks out in front of the truck. thanks in advace

dallas

Rockcrawlintoy · « **Reply #35 on:** Jan 16, 2007, 09:59:07 AM »

there is a side pic.

as for the front springs i am 84-88 rears up front hybrid pack. and no i have not broken anything so far wit th 40s. i do have an arb in the front so i know thats keeping a lot of stuff alive

Drew

Reynolds · « **Reply #36 on:** Jan 16, 2007, 02:45:18 PM »

Hey, do you have any pictures of your shackle setup? I just got a Chevy 44 for 100 bucks and its going under my 86 Runner sometime in the near future.

Rockcrawlintoy · « **Reply #37 on:** Jan 16, 2007, 06:29:29 PM »

here they are. my axle is narrowed as well as the spring perches so it wont be the same as a normal full width 44. they are under the frame with a full width axle u are goin to have to outboard the springs.

Drew

Reynolds · « **Reply #38 on:** Jan 17, 2007, 12:40:10 AM »

Whoops I posted that under my name not his lol. Anyway, thanks for the pics! Any other tips for slapping this thing underneath?

Reynolds · « **Reply #39 on:** Jan 17, 2007, 12:43:51 AM »

Oh we were planning on narrowing it up as much as you did. Whats the WMS on your axle now?

Rockcrawlintoy · « **Reply #40 on:** Jan 17, 2007, 07:33:54 AM »

its 63.5 inches wms. i narrowed the long side down 4 inches. here is the website i followed

http://home.4x4wire.com/erik/4runner/sas/

DRew

kiyul4130 · « **Reply #41 on:** Jan 17, 2007, 03:05:11 PM »

KYOTA · « **Reply #42 on:** Jan 17, 2007, 04:25:15 PM »

Quote from: Hyena on Nov 17, 2006, 04:17:53 PM

damn, guess i better order some up too! looks sick.

me 3 !

anyone looking for a set of 38" SX's

Rockcrawlintoy · « **Reply #43 on:** Jan 18, 2007, 07:33:54 PM »

here is an updated list of to dos for this summer

Install 4.7s, hydro assist and sliders
get a 14 bolt for the rear and build it do 8 lug in the front.
new clutch and redo the front and rear shocks

hopefully ill have that done by MC6

Drew

KYOTA · « **Reply #44 on:** Jan 18, 2007, 07:51:26 PM »

Jesse at High Angle is making Yota to 14 bolt flanges now

Rockcrawlintoy · « **Reply #45 on:** Jan 18, 2007, 10:35:45 PM »

i know. we will see how it goes i would love to have one but they are $$$ i have a dana 44 on ein the front and love it. if not i am goin to get a 1410 yoke and run that

Drew

Rockcrawlintoy · « **Reply #46 on:** Feb 01, 2007, 09:46:19 PM »

as of now i have sliders 4.7s and hydro stuff. now i need to look for a new rear end. not sure if i wanna do a 9 inch or some type of full float.

topar · « **Reply #47 on:** Feb 01, 2007, 11:30:49 PM »

Nice truck!

Ramrod · « **Reply #48 on:** Feb 02, 2007, 06:54:27 AM »

screw the 14 bolt, just stay toyota. Get a taco rear end if you want a little more width and strength.

Ramrod · « **Reply #49 on:** Feb 02, 2007, 06:55:05 AM »

well unless your getting into farming and need something to dig trenches?

Rockcrawlintoy · « **Reply #50 on:** Feb 02, 2007, 07:36:17 AM »

yeah i know i worry about the rear breaking. esp the ring gear with 40s.
i do wanna be wider the front with 8 lug stuff will be 65 inches wide. i dont know we will see.

Drew

kiyul4130 · « **Reply #51 on:** Feb 03, 2007, 03:08:32 PM »

Quote from: TEAM RAMROD on Feb 02, 2007, 06:55:05 AM

well unless your getting into farming and need something to dig trenches?

x2! stay toyota $That\'s Gay$ haha

Rockcrawlintoy · « **Reply #52 on:** Feb 03, 2007, 03:26:54 PM »

ill shave the 14 bolt and have it built for less then a grand and ill never have to worry about it.

DRew

Rockcrawlintoy · « **Reply #53 on:** Feb 10, 2007, 06:29:59 PM »

whoot hydro assist is here. now i am goin to focus on the rear end and hopefully bust that out so i can have it done by summer.

Drew

rude86 · « **Reply #54 on:** Feb 15, 2007, 01:40:44 PM »

thats a clean lookin rig

Rockcrawlintoy · « **Reply #55 on:** Apr 02, 2007, 09:16:12 PM »

sweet finally got the 4.7s in. sooo loooooowwww now

Drew

Hyena · « **Reply #56 on:** Apr 02, 2007, 09:48:19 PM »

hey, you should move that skid plate to the top of the side plates instead of underneath them. you will gain 3/4's of an inch of belly clearance!

Rockcrawlintoy · « **Reply #57 on:** Apr 02, 2007, 09:53:18 PM »

i know i have been meaning to do that. i wanna actually weld the plates to the frame so i can mout them a little higher. all in due time

DRew

RHG · « **Reply #58 on:** Apr 12, 2007, 05:11:48 AM »

or you could use a 1" body lift puck and tuck that t-case up a lil more. That is if you got the clearance

Rockcrawlintoy · « **Reply #59 on:** Apr 12, 2007, 08:03:25 AM »

yeah right now tho i really don't have the clearance. it already is 1/2 and inch from the cab. this summer ill prolly break out the air hammer and tuck it up further.

Drew

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Related Topics