TinBenders '06 Jamboree pics....

Started by nowhitefenders, April 24, 2006, 09:03:40 PM

0 Members and 1 Guest are viewing this topic.

nowhitefenders

OK we got our Jambo '06 pics up too. Check 'em out. And see the pics we added to the Baja trip as well....  :cool:
http://www.nowhitefenders.com/trailruns.htm
www.nowhitefenders.com
www.my4x4tv.com

BigMike

Nice :thumbs: So, I just have to ask, what's with the whole "no white fenders" thing? :headscratch: All I can think of is that you guys don't like fiberglass body kits being sold unpainted? :smack:
Check out our new Rock Crawling Videos!
2016 56-speed 580:1 Tacoma Rock Crawler   
1981 36-speed 511:1 3RZ-FE Rock Crawler
1987 6-speed Supercharged 4A-GZE MR2
Instagram: @SlowestTacoma
Things are only impossible until they are not.
"The worst of both worlds, the best of neither." -abnormaltoy
"An informed question. But difficult to answer. I am what you see." -Nanaki

nowhitefenders

#2
 :gap:  Oh the name refers to wannabes that throw on glass or big tires or anything for that ''off-road look'' on trucks that just wont cut it with the trails or what we do.  We thought it was a funny name and Mallroaders and So.Cal. Off-Roaders was taken for a club name.....hahaha. Basically we are a community of off-road enthusiasts and try to provide everyone an opportunity to go wheeling.  So we try to set up runs to cater to those who want to hit the back-country roads all the way up to the Hammers.  We don't sit at a pizza joint and talk trash about who didn't show up, we just go 'wheeling and make sure anyone that wants to go with us has an opportunity to have a great time.  We set up our runs and post the pics on the net to help expand our sport so everyone can have some fun and hope that if we use our public land we keep it all open for off-road use. 
OK, thats about as short as I can make my answer to your question...  :hammerhead:
www.nowhitefenders.com
www.my4x4tv.com

rockhound

#3
Quote from: nowhitefenders on April 25, 2006, 03:49:20 AM
:gap:  Oh the name refers to wannabes that throw on glass or big tires or anything for that ''off-road look'' on trucks that just wont cut it with the trails or what we do.  We thought it was a funny name and Mallroaders and So.Cal. Off-Roaders was taken for a club name.....hahaha. Basically we are a community of off-road enthusiasts and try to provide everyone an opportunity to go wheeling.  So we try to set up runs to cater to those who want to hit the back-country roads all the way up to the Hammers.  We don't sit at a pizza joint and talk trash about who didn't show up, we just go 'wheeling and make sure anyone that wants to go with us has an opportunity to have a great time.  We set up our runs and post the pics on the net to help expand our sport so everyone can have some fun and hope that if we use our public land we keep it all open for off-road use. 
OK, thats about as short as I can make my answer to your question...  :hammerhead:

:blah: :blah: :blah:

White fenders = pre-runners.

No white fenders = rock crawlers.

Hey, I should rename my website to Constantly Replacing and Painting Fenders.  :gap:




How you 'sposed to know what your limitations are, till you exceed them.

www.RunandPlayMotorsports.com

nowhitefenders

 :shocking:  How about "TuffyIII the tube buggy....."
www.nowhitefenders.com
www.my4x4tv.com

CRSHROX

 :hahaha:
How'bout just taking all the fenders and the bed off ??
Happiness is shiny new parts for the beater truck !

rockhound

How you 'sposed to know what your limitations are, till you exceed them.

www.RunandPlayMotorsports.com

Loosekannon

Hey Al, your trucks looking worse than mine :hahaha: Wreckingball put some good pregnant dog slaps on my bed :_order: Time to dove tail the back end and maybe try to beat some of the dents out. Or tube the rear with a 4-link and run bed skins on the back :whistle:

Hyena

Wrecking ball caught the passenger side of my bed also.  I took some time today and highlifted the sides back out, trying to make them as straight as possible again.  They don't look to bad i guess.  But Al, your truck took a beating.  did you break that second birf on outer limits?

toyoda

Hey why wasn't I invited to the party..   :rivers:

I think Als bed and fenders is the least of his troubles..  :cheese:

If you don't know why I have a "D" in Toyoda you don't know Toyotas!!
http://my4x4tv.com/

toyoda

 :inthedark: I think i had a close call in matching Als truck. That would'a sucked..  :crazy:

If you don't know why I have a "D" in Toyoda you don't know Toyotas!!
http://my4x4tv.com/

Wraith

Quote from: rockhound on April 25, 2006, 06:15:27 AM
:blah: :blah: :blah:

White fenders = pre-runners.

No white fenders = rock crawlers.

Hey, I should rename my website to Constantly Replacing and Painting Fenders.  :gap:






Al, just put a new marlin sticker on the trashed parts and call it good. Heck you can barely tell.   :gap: Just keep telling yourself that body damage is beautiful  :therethere:

"Why yes I am an extremist, thank you for noticing" Ted Nugent
"There is nothing more frightening than ignorance in action" Einstein

rockhound

#12
Quote from: Hyena on April 27, 2006, 10:37:08 PM
Wrecking ball caught the passenger side of my bed also.  I took some time today and highlifted the sides back out, trying to make them as straight as possible again.  They don't look to bad i guess.  But Al, your truck took a beating.  did you break that second birf on outer limits?

Brad, Yep 2nd Birf right at the end of Outer limits. That's where I picked up the drivers side scar.

Quote from: Wraith on April 28, 2006, 04:32:02 PM
Al, just put a new marlin sticker on the trashed parts and call it good. Heck you can barely tell.   :gap: Just keep telling yourself that body damage is beautiful  :therethere:

I like the way you think Dennis. But I can't open the passenger door. So something has got to change.

Body damage is beautiful, body damage is beautiful, body damage is beautiful...

Quote from: Loosekannon on April 27, 2006, 10:05:37 PM
Hey Al, your trucks looking worse than mine :hahaha: Wreckingball put some good pregnant dog slaps on my bed :_order: Time to dove tail the back end and maybe try to beat some of the dents out. Or tube the rear with a 4-link and run bed skins on the back :whistle:

Chase, Link it with dove tail. That would be way cool.

Quote from: toyoda on April 28, 2006, 06:09:36 AM
:inthedark: I think i had a close call in matching Als truck. That would'a sucked..  :crazy:



Not even close ! Don't do it Rob. You're trucks too purty.


Wait till you see T II next time. I have my eye on a bed, I've got two fenders  :eyebrow:, Joe has a couple half doors, and I placed my order for Longs! It just keeps getting better.


Maybe I can wheel the really gnarly stuff and keep the truck lookin fairly stock.
How you 'sposed to know what your limitations are, till you exceed them.

www.RunandPlayMotorsports.com

lilbuddy

here is the link to my imagestation page. Itd take forever to load them on here. You dont need to become a member to the page.

http://www.imagestation.com/album/pictures.html?id=2106903564

And they are also here and posted up: http://board.marlincrawler.com/index.php?topic=23657.msg250582#msg250582
RIP Kyota.... you are the man

GET IT!!!

unclejpl4x4

so who whas that hanging off the BBoard ?   and what was that on the helicoptor ?
O nice pics
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

nowhitefenders

 :dunno: Yeah whats the deal with the helicoptor Lil'Buddy?
Oh was that someone posing with the MARLIN sign? 
www.nowhitefenders.com
www.my4x4tv.com

lilbuddy

Quote from: nowhitefenders on April 29, 2006, 08:08:57 PM
:dunno: Yeah whats the deal with the helicoptor Lil'Buddy?
Oh was that someone posing with the MARLIN sign? 

Well someone found an undetonated bomb out there so I heard the helicoptor was looking for any other bombs that could be out there. The Tinbenders said that to someone and I heard it and then on Pirate yesterday I saw the bomb that was found. Someone was carrying it  :shocking: SO I heard that it was like a big magnet on the helicoptor but then I heard that they were doing land graphs out there... So I dont know.

That was Tim (TURBO) climbing up it. I bet him that he couldnt make it to the top of the big sign and he did. There was no latter and he climbed up the side and then made his way over to the latter and went right up to the top. It looked pretty funny.
RIP Kyota.... you are the man

GET IT!!!

rockhound

Chris, You got some great shots! I can't wait to do it again. :biggthumpup:
How you 'sposed to know what your limitations are, till you exceed them.

www.RunandPlayMotorsports.com

toyoda

 :yikes: Ok i sent this pic on to my Dad since hes a pilot and he knows everything.  :headscratch: I gotta know what the hell it is.. rack'n my brain trying to figure it out.  :hammerhead:

:phone:



If you don't know why I have a "D" in Toyoda you don't know Toyotas!!
http://my4x4tv.com/

Shamb

That my friend is a helicopter STINGER,   :smack:  duh!

So if it goes down any steep declines it wont flip!!! 

they're @ the hammers you know!

:D
R.I.P to my Papa, I miss you pops......

Knowledge is power  www.pirate4x4.com/forum

New Buildup in process 85' 4runner "Bad Decisions"
http://board.marlincrawler.com/index.php?topic=52566.0

Check out my 1-ton build up thread
http://board.marlincrawler.com/index.php?topic=22600.0

Hyena

I heard people say that it maps out the area or something.  then i also heard people say it is a magnet for bomb detecting since they did find an unexploded bomb out there.

unclejpl4x4

:nonono:  its a  Aeronautical cow catcher
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

Ramrod

the logical thing to me is that it was a giant metal detector espescially since when I drove by that thing which was about 15 seconds before that pic was taken it was about 2 ft off of the ground just cruising

FIREBALL


nowhitefenders

 :dunno:  Maybe they were transporting that thing to the Burning Man festival...
www.nowhitefenders.com
www.my4x4tv.com