Author Topic: Re: Newbie gurl in NC sayin hi (Read 10302 times)

Lady Di · « **Reply #60 on:** Apr 16, 2006, 08:34:25 AM »

ya know I love ya

Toygurl · « **Reply #61 on:** Apr 16, 2006, 10:01:09 AM »

OK Now dang it I hope I can post a pic so here goes........

Lady Di · « **Reply #62 on:** Apr 16, 2006, 10:32:36 AM »

It worked

Nice truck

GoaT · « **Reply #63 on:** Apr 16, 2006, 10:34:38 AM »

Quote from: MrsWillyMammoth on Apr 16, 2006, 10:32:36 AM

It worked Nice truck

unclejpl4x4 · « **Reply #64 on:** Apr 16, 2006, 10:39:16 AM »

Quote from: Toygurl on Apr 16, 2006, 10:01:09 AM

OK Now dang it I hope I can post a pic so here goes........

Hay where you from aging ? wana go out some time

Lady Di · « **Reply #65 on:** Apr 16, 2006, 11:42:03 AM »

Quote from: unclejpl4x4 on Apr 16, 2006, 10:39:16 AM

Hay where you from aging ? wana go out some time

UncJ, what's the subject of the thread?

79coyotefrg · « **Reply #66 on:** Apr 16, 2006, 12:10:55 PM »

Quote from: MrsWillyMammoth on Apr 16, 2006, 11:42:03 AM

UncJ, what's the subject of the thread?

he cant hang diane

79coyotefrg · « **Reply #67 on:** Apr 16, 2006, 12:11:58 PM »

ok toygurl that trucks lookin sweet , now we need to see some with you

cruzila · « **Reply #68 on:** Apr 16, 2006, 12:32:23 PM »

Mmm, gumbos. or are those the skinny ones?

Rocksurfer · « **Reply #69 on:** Apr 16, 2006, 12:38:20 PM »

Quote from: Toygurl on Apr 16, 2006, 10:01:09 AM

OK Now dang it I hope I can post a pic so here goes........

Nice truck, now that you figured out how to down size an image how about some with you working it.

Lady Di · « **Reply #70 on:** Apr 16, 2006, 01:09:04 PM »

Quote from: cruzila on Apr 16, 2006, 12:32:23 PM

Mmm, gumbos. or are those the skinny ones?

Nice truck Scott, but Swampers are the only way to roll.

Rocksurfer · « **Reply #71 on:** Apr 16, 2006, 01:17:58 PM »

Quote from: MrsWillyMammoth on Apr 16, 2006, 01:09:04 PM

Nice truck Scott, but Swampers are the only way to roll.

Eh, almost bald BFG MudTerrains are what I run. To afraid to but a new set of tires, I know if I do I'll be cutting a side wall. I just visit the used tire guys until I find one. I find they are easy to find since they are so common. I did just find a guy that can get me 35" Goodyear's for $100.00 a piece from race trucks gonna look into that.

Toygurl · « **Reply #72 on:** Apr 16, 2006, 05:13:56 PM »

Ive wanted a lifted Toyota since high school and that was about 20 years ago (dropping hints at my age here) so this one came along and I couldnt resist. Ive just never grown up just older I think.......... Ive also got a purple Harley and I have an 04 WRX wagon with about 295hp that I autocross on my spare weekends. Anyway back to the truck Ive got to fix the brakes, fix an oilpan gasket leak and then the truck can be on the highway. Next Ive got to get a driveshaft made and then Im ready to hit the beach. Hey I do have a question.....I need to rotate my transfer case and I was told I needed a clocking ring........where do I get one of those? Thanks for all the replys and I know Im gonna be asking a ton of questions to get this bad boy wheelin'.

DTB · « **Reply #73 on:** Apr 16, 2006, 05:20:53 PM »

I think you can get them from Marlin. check the products page under t-cases.

Lady Di · « **Reply #74 on:** Apr 17, 2006, 05:15:16 PM »

You'll want to check out the tech pages too to see what questions have already been asked, you may find info there that has already been addressed.
I don't think the search engine is too user friendly but it's a start.
Starting a build thread is a good idea too.

unclejpl4x4 · « **Reply #75 on:** Apr 17, 2006, 05:36:08 PM »

ok now we love your truck........ how about more "you time/pics"
So your about 37-38 yrs old. what elsa.

Heres http://www.myspace.com/unclejpl4x4 if U like 2 see who your talking 2 + most of my frineds post in this thread so U can see what thier like 2. Don't be shy we won't

Hell i got a 3" body lift and live noware near rocks and i'm loved

79coyotefrg · « **Reply #76 on:** Apr 17, 2006, 07:49:04 PM »

Quote from: Toygurl on Apr 16, 2006, 05:13:56 PM

Ive wanted a lifted Toyota since high school and that was about 20 years ago (dropping hints at my age here) so this one came along and I couldnt resist. Ive just never grown up just older I think.......... Ive also got a purple Harley and I have an 04 WRX wagon with about 295hp that I autocross on my spare weekends. Anyway back to the truck Ive got to fix the brakes, fix an oilpan gasket leak and then the truck can be on the highway. Next Ive got to get a driveshaft made and then Im ready to hit the beach. Hey I do have a question.....I need to rotate my transfer case and I was told I needed a clocking ring........where do I get one of those? Thanks for all the replys and I know Im gonna be asking a ton of questions to get this bad boy wheelin'.

well darlin the clocking ring you need should be MC08-R10 it rotates the gear driven case up 10 degrees

MC08-R10 Dual Transfer Case Adapters
This special Billet aluminum adapter rotates the rear transfer case left 10 degrees. This lifts up the 4wd front section so that it is level with the rest of the transfer case. Increases clearance under case by 1 3/16". Requires slight bending of rear shifter.

MC-14104, MC08-R10, 21 Spline Kit, $499
MC-14105, MC08-R10, 23 Spline Kit, $499

79coyotefrg · « **Reply #77 on:** Apr 17, 2006, 07:51:36 PM »

http://www.frontpagecart.com/app/netcart.asp?MerchantID=58912&ProductID=2563763

cruzila · « **Reply #78 on:** Apr 17, 2006, 08:10:06 PM »

Glen you didn't get the blingn' pic.

GoaT · « **Reply #79 on:** Apr 17, 2006, 08:30:21 PM »

Hehe bling meter

Toygurl · « **Reply #80 on:** Apr 18, 2006, 05:07:57 AM »

Thanks for all the help and info.........now remember Im thinking/talking like a girl here and my descriptions and terms arent the best in the world- my transfer case is a GM or K&M product and Im going to the front Toyota driveshaft. I checked out these products and I think they are for a Toyota transfer case? The clearance under the truck and the transfer case is where I was told there might be an issue for the front driveshaft. That was why someone said rotate it. Anyway there isnt even a front driveshaft in the truck at this point. Im going to do a search and see how much more I can confuse myself today.

Wermz84 · « **Reply #81 on:** Apr 18, 2006, 08:36:05 AM »

We all need one of these installed..

nice truck by the way toygurl

FATB0Y · « **Reply #82 on:** Apr 18, 2006, 11:49:56 AM »

Me likey you truck

Lady Di · « **Reply #83 on:** Apr 18, 2006, 11:55:44 AM »

Hey Fatboy, you and Toygurl are in the same state. Are you close to each other?

Toygurl · « **Reply #84 on:** Apr 19, 2006, 05:57:07 AM »

Fatboy is about an hour and 1/2 away..........funny thing is he is just around the corner from where I bought my truck. He also has a veryyyyyy nice looking bike too. Might have to do a road trip and check his bike out. I like any excuse to ride!

79coyotefrg · « **Reply #85 on:** Apr 19, 2006, 07:07:59 AM »

now i gotta buy a Harley $I\'m Down$

79coyotefrg · « **Reply #86 on:** Apr 19, 2006, 07:10:51 AM »

Quote from: Toygurl on Apr 18, 2006, 05:07:57 AM

Thanks for all the help and info.........now remember Im thinking/talking like a girl here and my descriptions and terms arent the best in the world- my transfer case is a GM or K&M product and Im going to the front Toyota driveshaft. I checked out these products and I think they are for a Toyota transfer case? The clearance under the truck and the transfer case is where I was told there might be an issue for the front driveshaft. That was why someone said rotate it. Anyway there isnt even a front driveshaft in the truck at this point. Im going to do a search and see how much more I can confuse myself today.

can you get some pics?? so you have a 350-chevyauto-andchevyish tcase

i cant picture the angle being that bad, but

FATB0Y · « **Reply #87 on:** Apr 19, 2006, 09:47:34 AM »

Quote from: Toygurl on Apr 19, 2006, 05:57:07 AM

I like any excuse to ride!

Yeah me 2 8)

Lady Di · « **Reply #88 on:** Apr 19, 2006, 10:05:13 AM »

and I agree (and always have) that Fatboy's harley is very nice looking! An hour and a half away. Sounds like a good excuse for a roadtrip.
I know it's probably in the thread a little further up, but did toygurl say she had a harley too? I thought i remembered something about a bike.

Toygurl · « **Reply #89 on:** Apr 20, 2006, 05:47:43 AM »

Quote from: 79Coyotefrg on Apr 19, 2006, 07:07:59 AM

now i gotta buy a Harley $I\'m Down$

I'll get you a t-shirt and you can ride on the back!

Yep I do have a Harley.............its not bad for a girls bike cuz its purple!

I'm going to get a pic of the angle for my driveshaft and see what you think on the angle. It is a Chevy swap with the chevy transfer case too.

Toygurl [OP]

Toygurl [OP]

Toygurl [OP]

Toygurl [OP]

Toygurl [OP]

Related Topics