Author Topic: Ultimate Toyota Build-up (Read 80749 times)

UNBREAKABLE · « **Reply #120 on:** Sep 13, 2006, 07:21:33 PM »

no, not really...I just don't want it to spilt in two when I do something fun

I am gonna pop holes in the back of the cab and tie the bed into the interior cage(6-8 point) for even more rigidity..It will also have a x-cab protectors (come from main hoop) that tie into the sliders. These too will be tied into the interior cage...just in case

xxxfirstgen · « **Reply #121 on:** Sep 13, 2006, 07:33:31 PM »

Rockin...like the progress

topar · « **Reply #122 on:** Sep 13, 2006, 10:13:43 PM »

:biggthumpup:Damn that thing looks good

UNBREAKABLE · « **Reply #123 on:** Sep 14, 2006, 03:02:32 AM »

Thanks

UNBREAKABLE · « **Reply #124 on:** Sep 23, 2006, 06:32:28 PM »

H1's are back in! I'll post pics prob. tomorrow. I'M STILL WAITING ON MY LOWER LINKS! This is getting to be stupid, he has had them for a month! STILL NOT DONE! It's only 2 links...4 threads!

YO38 · « **Reply #125 on:** Sep 24, 2006, 08:41:06 PM »

Nice build, I like the bed cage so far. I'll be watching this one, I've been planning something similar.

4XFlyin · « **Reply #126 on:** Sep 24, 2006, 11:19:14 PM »

Looking good. I have been gathering my goodies for about two years now and I am getting to the point where I can start. I like how the rear tubing is coming out. Keep up the nice work.

UNBREAKABLE · « **Reply #127 on:** Sep 25, 2006, 03:54:54 AM »

Thanks

ATLRoach · « **Reply #128 on:** Sep 25, 2006, 09:09:54 AM »

Who in charlotte did your recentering? i had mine just done by Creative Engineering in Tx do mine. If I would have know about someone in NC doing it I would have just saved a ton on shipping.

UNBREAKABLE · « **Reply #129 on:** Sep 25, 2006, 12:29:10 PM »

HA! I got all of mine done for $150

MR_DIY · « **Reply #130 on:** Sep 25, 2006, 02:13:10 PM »

Quote from: UNBREAKABLE on Sep 25, 2006, 12:29:10 PM

HA! I got all of mine done for $150

nice

UNBREAKABLE · « **Reply #131 on:** Sep 25, 2006, 07:31:32 PM »

Well, I got my links back today. I am so pissed, you have no idea. The guy F'd up 2 sticks $100 ea(roughly) So now he is gonna have to buy me 4 threaded inserts

1 link he threaded left handed 2x(and I can't even get the end to go in more than an inch!)
the other link he threaded right on 1 side and gutted the other! He tapped it 2x and cut all the threads out of it.
Here are the pics. It is kinda hard to make out though

I got them back before he could destroy all of them. Damn I'm mad

DTB · « **Reply #132 on:** Sep 25, 2006, 07:35:36 PM »

sounds like its time for a beat-down....

UNBREAKABLE · « **Reply #133 on:** Sep 25, 2006, 07:38:02 PM »

That tubing is 2" .50 wall Hyd Cyl Tubing...it was solid tube that has had 1" bored out of the center, It is super stout. We'll see, he is hopefully gonna buy me some tube adapters.

YO38 · « **Reply #134 on:** Sep 25, 2006, 09:36:01 PM »

That sucks I'd be freakin pissed

UNBREAKABLE · « **Reply #135 on:** Sep 26, 2006, 03:45:09 AM »

I'm not a happy camper to say the least

4XFlyin · « **Reply #136 on:** Sep 26, 2006, 09:03:18 AM »

The guy could have done a better job with a torch. That is B.S.

MR_DIY · « **Reply #137 on:** Sep 26, 2006, 10:12:42 AM »

hit him with one. sorry man, that sucks. hopefully he'll have more integrity than he does skill.

toyspider81 · « **Reply #138 on:** Sep 27, 2006, 09:20:19 PM »

nice bild-up cant wait to see more pic's

UNBREAKABLE · « **Reply #139 on:** Sep 28, 2006, 03:47:11 AM »

As soon as I get the threaded tube adapters in....

6.72:1 · « **Reply #140 on:** Sep 29, 2006, 08:02:43 AM »

Javelin Time at the machiner's office!

UNBREAKABLE · « **Reply #141 on:** Sep 29, 2006, 10:18:27 AM »

I'm waiting now.

prang11 · « **Reply #142 on:** Sep 29, 2006, 10:47:23 AM »

bummer

UNBREAKABLE · « **Reply #143 on:** Sep 29, 2006, 03:56:15 PM »

My tube adapters are in the mail from Polyperformance 6=$84 BUT I'M NOT PAYING FOR THEM!

NEWS FLASH: I am not able to afford coil-over shocks right now. I am gonna put airshoxs in the rear as planned but I am going to be putting coils up front. I found some kick ass coil mounting brackets from http//www.ballisticfabrication.com/brackets.htm and I'm gonna order them in a few weeks(unless I come into contact with some big $$$) $1200 for some blinging ass shocks is not worth not being able to wheel. I am going to get my engine and build my t-cases next and that is gonna be a chunk of change
List Prices
(1) Clocked Dual Case Adapter from Marlin Crawler $499
(1) 23 Spline 4.7:1 Gear Set $399
(1) 23 Spline Input Gear $125
(1) 4340 Chromoly Output Shaft from Bobby Long $240
(1) Clocked Twin Stick $200
(1) T-Case Rebuild Kit $184
(1) Rear Driveline Disconnect (FROR) $500(possibly)
ENGINE= 3.4L Tacoma V-6
(1) 3.4L 30K miles All accessories $900~
(1) R150 Bellhousing to mate 3.4 to R151F $?

KDC · « **Reply #144 on:** Sep 29, 2006, 10:12:11 PM »

So, no more 1uz-fe?
That sucks about the threads, the worst part about these builds is waiting for stupid stuff like that.

Have you worked out how you're gonna do the cable conversion for the elockers, yet. I'd be interested to see what you're gonna do. I've read that with cable, it takes a longer amount of time to lock, but I don't know if that's because of design flaws or what.

4XFlyin · « **Reply #145 on:** Sep 30, 2006, 08:16:34 AM »

The link for Ballistic no workee

UNBREAKABLE · « **Reply #146 on:** Sep 30, 2006, 03:15:22 PM »

FIXED!

UNBREAKABLE · « **Reply #147 on:** Oct 03, 2006, 07:25:19 PM »

Here are my sliders to this point, they also protect the x-cab and tie into the bed cage and they will continue forward to protect the front fenders and tie into the front bumper
Side and slant view

UNBREAKABLE · « **Reply #148 on:** Oct 07, 2006, 06:22:22 PM »

I just wanted everyone to know that progress IS being made. I will post pics tomorrow night.

My tube adapters are here(not installed, just here)

I built 78.3% of my pass. side slider today also.

MR_DIY · « **Reply #149 on:** Oct 08, 2006, 08:17:40 AM »

78.3% huh LMAO

new pics asap please. I AM very interested in the next stage of your build. can't wait to wheel with ya either. why are you gonna clock your cases? seems to be a lot of $ when you could just do a drivetrain lift cheaply?

I am not making much progress on my build b/c I'm at home hung the F over b/c I partied too hard last night.

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

UNBREAKABLE [OP]

Related Topics