my new 90 supra 7M-GTE

Started by unclejpl4x4, April 01, 2006, 06:51:36 PM

0 Members and 7 Guests are viewing this topic.

what should i do

pull the moter  install it in the 93 truck  /scrap car
5 (23.8%)
pull the moter-stuff  sell it / scrap car
2 (9.5%)
fix the car then  drive it  so i can rebiuld my truck.
5 (23.8%)
option 3 + sell car when done
2 (9.5%)
Option 3 +   drag it
7 (33.3%)

Total Members Voted: 21

unclejpl4x4

:driving:
So i picked up the Supra off my friend for 600$
The car has 157,000  miles on it but the moter has around 25,000.
There is a K&N  and a  intercooler (factory looks like)  boost comp(13psi),   fuel timing comp, and blowoff valve
Now i have ridden in this car  and it's fast . The paint needs love  +trim work   and the inside. well it needs to be pimped.
Also need 2 do brakes  and it has no exhaust  eccept for a rusted holey down pipe.

Here are some pics
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

DTB

Interior looks like :pokinit: but you still gotta hell of a deal. I forgot, what are you gonna do with it? DD or throw that 7mge in your truck? :beerchug:
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

unclejpl4x4

more pics
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

GoaT

FYI u might be able to sell the safc and boost controller and make close to ur money back..

um its a  factory wastgate is on it.... fyi


and i think this car might be worth holding on to if ur willing to do a head gasket.. EVERY turbo 7m will blow. unless its a metal head gasket. so do u have a daly driver???

GoaT

oh and if its a j-spec motor im sure it has about 50+... but usually great motors still

GoaT

Quote from: DirToyBoy on April 01, 2006, 07:02:25 PM
Interior looks like :pokinit: but you still gotta hell of a deal. I forgot, what are you gonna do with it? DD or throw that 7mge in your truck? :beerchug:

dont mean to be a ass... but im a ex supra junki...

7mgte is the correct code

unclejpl4x4

The short block came from japan...  as for the head gaskets  ill ask.  As for the boost comp it's not mine or the guy i got the car from.... so I will have 2 give that guy $$ when he finds out i have the car ( Friend 2)
I  am 75% sure  i will fix the mechanical  stuff  so i can get it on the road.  So i can take my time  and rebuild the moter on my DD 93 truck.
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

GoaT

Quote from: unclejpl4x4 on April 01, 2006, 07:20:01 PM
The short block came from japan...  as for the head gaskets  ill ask.  As for the boost comp it's not mine or the guy i got the car from.... so I will have 2 give that guy $$ when he finds out i have the car ( Friend 2)
I  am 75% sure  i will fix the mechanical  stuff  so i can get it on the road.  So i can take my time  and rebuild the moter on my DD 93 truck.

if he tells u he just got the motor and put it in. just plan on the head gasjet blowing on u expecially if he was running it as had as he was.. i got 6 months out of my head gasket running 13 psi...

it need to be a metal one or it will blow no matter what u do.

for a temp prolonged fix pull the valve covers and tapthe hell out of the head bolts and retorque to about 80-85 i think been a while. let me know when u do it and ill find out exactly what lbs it need to be....

DTB

Quote from: GoaT on April 01, 2006, 07:12:49 PM
dont mean to be a ass... but im a ex supra junki...

7mgte is the correct code
:yesnod:


:moon: whatever, Mr. Smarty Pants.   hahahaha     
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco


unclejpl4x4

build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly


BigMike

GoaT, you'd be surprised how cheap those Apex'i SAFCs go for on eBay. I doubt he would get more then $300 for the SAFC and the boost controller...

That engine looks really clean. I vote to either clean up the car a bit and then pedal it for $1500-2000, or part it out. It would be nice to put the Turbo Transmission in your truck with a 23-spline MC :turtle: Crawler setup :bling: but course its a 2WD R154 trans, that not only has a higher first gear (3.30:1 vs. 4.31:1 R151F), but you will have to completely tear it down to replace the output shaft and tail housing, and replace the shifter base and shoe, all of these parts being from a 4WD transmission.... So basically you would need nearly an entire 4WD R-series trans just to convert a 2WD R-series trans which, of course, defeats the whole purpose.

Part it out mang :gap:

BigMike
Check out our new Rock Crawling Videos!
2016 56-speed 580:1 Tacoma Rock Crawler   
1981 36-speed 511:1 3RZ-FE Rock Crawler
1987 6-speed Supercharged 4A-GZE MR2
Instagram: @SlowestTacoma
Things are only impossible until they are not.
"The worst of both worlds, the best of neither." -abnormaltoy
"An informed question. But difficult to answer. I am what you see." -Nanaki

GoaT

Quote from: BigMike on April 01, 2006, 07:57:59 PM
GoaT, you'd be surprised how cheap those Apex'i SAFCs go for on eBay. I doubt he would get more then $300 for the SAFC and the boost controller...

That engine looks really clean. I vote to either clean up the car a bit and then pedal it for $1500-2000, or part it out. It would be nice to put the Turbo Transmission in your truck with a 23-spline MC :turtle: Crawler setup :bling: but course its a 2WD R154 trans, that not only has a higher first gear (3.30:1 vs. 4.31:1 R151F), but you will have to completely tear it down to replace the output shaft and tail housing, and replace the shifter base and shoe, all of these parts being from a 4WD transmission.... So basically you would need nearly an entire 4WD R-series trans just to convert a 2WD R-series trans which, of course, defeats the whole purpose.

Part it out mang :gap:

BigMike

i said almost :asskick:

unclejpl4x4

ya the car is a AutoTragic  :(     but there is  site http://www.supracharged.com/   They are or was... in the proces of making a bell housing adapter,  havent read it in a while.
I would lov the moter in my truck. but  I need it 2 drive 2 work every day so i can't aford the down time  of a build like that.
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

kneedownnate

Cool car man!  I just pulled an lsd outa one of these at the junk yard today, half price day! 
RIP KYOTA

You can go through life being scared of the possible, or you can have a little fun and tease the inevitable.

Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life!

unclejpl4x4

well change the plugs 2 day.  :crazy:   they where black  and the gap was really small.  put new plugs in with right gap.

I found  alot of vac hoses will have 2 be replaced ( factory hoses)   and the main hose for the intake broke in half when i took it off  :shake_head:   not to metion my fat elbow broke the fan shroud & a vac sensor on the thermostat hosing :hammerhead:
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

GoaT

Quote from: unclejpl4x4 on April 02, 2006, 01:28:11 PM
well change the plugs 2 day.  :crazy:   they where black  and the gap was really small.  put new plugs in with right gap.

I found  alot of vac hoses will have 2 be replaced ( factory hoses)   and the main hose for the intake broke in half when i took it off  :shake_head:   not to metion my fat elbow broke the fan shroud & a vac sensor on the thermostat hosing :hammerhead:

the accordian hose??? uh oh thats a pricy piece to change out... :slapwrist:

have u checked the oil to see if its still good? im worried about a blown HG

BigMike

:offtopic:

Quote from: GoaT on April 01, 2006, 08:03:46 PM
i said almost :asskick:

Oh rreeeeeeeeeaaaaaaallllllllllyyy :therethere: Here's your post I was refering to:

Quote from: GoaT on April 01, 2006, 07:10:41 PM
FYI u might be able to sell the safc and boost controller and make close to ur money back..

um its a  factory wastgate is on it.... fyi


and i think this car might be worth holding on to if ur willing to do a head gasket.. EVERY turbo 7m will blow. unless its a metal head gasket. so do u have a daly driver???

You never said "almost" anywhere :insertwrongsmileycodehere:

unclejpl4x4, so does it at least run right now? How does it idle? What are the gas prices out where you live? Might want to lower the boost back to stock if you don't plan on running premium.
Check out our new Rock Crawling Videos!
2016 56-speed 580:1 Tacoma Rock Crawler   
1981 36-speed 511:1 3RZ-FE Rock Crawler
1987 6-speed Supercharged 4A-GZE MR2
Instagram: @SlowestTacoma
Things are only impossible until they are not.
"The worst of both worlds, the best of neither." -abnormaltoy
"An informed question. But difficult to answer. I am what you see." -Nanaki

unclejpl4x4

well the car dose run  drove it on the trailer and off ,  I could drive it down the street.  The oil is good  but im gona change all the fluids.   it did idle a little rough   but the plugs where wacked and lots of bad Vac hoses.   I have it apart atm  till i get hoses + i need a battery.

As for gas i was told it gets around 21 miles a galon ?  witch is more then my truck... and yes im gona de-boost it :down:  i was also told i have 2 run "super  93 oct"      it's  2.39-2.45 for reg here.
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

Rocksurfer

Quote from: BigMike on April 03, 2006, 03:10:22 AM
:insertwrongsmileycodehere:

For that all I have to say is :rofl:

I'd sell the parts.


The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

BigMike

Quote from: unclejpl4x4 on April 03, 2006, 04:39:11 AM
i was also told i have 2 run "super  93 oct"      it's  2.39-2.45 for reg here.

HOLY COW! You are one lucky dog. 87 Oct here is 2.73 and 93 oct is 3.03 a gallon!!!!!!!!!!!!!! (Fresno, CA)
Check out our new Rock Crawling Videos!
2016 56-speed 580:1 Tacoma Rock Crawler   
1981 36-speed 511:1 3RZ-FE Rock Crawler
1987 6-speed Supercharged 4A-GZE MR2
Instagram: @SlowestTacoma
Things are only impossible until they are not.
"The worst of both worlds, the best of neither." -abnormaltoy
"An informed question. But difficult to answer. I am what you see." -Nanaki

RK

Man, strip the interior, put in what is neccessary, the outside dont look so bad. relatively minor. spend a lil, hop it up and run it like that. I may have a big core intercooler for ya. just no piping.
Max
Black Hole Racing - 84 Jackalope/79 Devil Bunny/87 Golf - Service rig: 2012 Ram 3500

reklund5

Sell it.  NOW.  That car will sap every last cent you have from you, I promise.  Trust me, I've got one!

Ryan

'84 Hilux, locked, dual-cased, winched, EFI converted, 37" tired, half-doored (in the summer...)
'87 Supra, 400 HP.  smooth as glass at 130 'cause my tires are NEW!...
'92 F250 Diesel, tow rig, ATS Turbo, leveling kit, killer stereo

BigMike

Check out our new Rock Crawling Videos!
2016 56-speed 580:1 Tacoma Rock Crawler   
1981 36-speed 511:1 3RZ-FE Rock Crawler
1987 6-speed Supercharged 4A-GZE MR2
Instagram: @SlowestTacoma
Things are only impossible until they are not.
"The worst of both worlds, the best of neither." -abnormaltoy
"An informed question. But difficult to answer. I am what you see." -Nanaki

DTB

RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

unclejpl4x4

Quote from: reklund5 on April 03, 2006, 08:38:11 PM
Sell it.  NOW.  That car will sap every last cent you have from you, I promise.  Trust me, I've got one!

Ryan





The funny thing is i know.
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

GoaT

Quote from: BigMike on April 03, 2006, 03:10:22 AM
:offtopic:

Oh rreeeeeeeeeaaaaaaallllllllllyyy :therethere: Here's your post I was refering to:

You never said "almost" anywhere :insertwrongsmileycodehere:

unclejpl4x4, so does it at least run right now? How does it idle? What are the gas prices out where you live? Might want to lower the boost back to stock if you don't plan on running premium.

ok close... now shovel it!!! jk

GoaT

Quote from: unclejpl4x4 on April 04, 2006, 04:35:05 AM
The funny thing is i know.


:imwithstupid:

these cars are exspinsive and yes u will get 18-22mpg if u stay out of the boost. id get 20 when id cruse up to austin 80mph at 3k...

oh and leave my 1337 smilie code skills alone. i dont have the pacients to got find a smilie every time i want to use it... but i guess i dont have to use quick reply every time huh??? W/E

unclejpl4x4

lol well I stopped at home depot  and looked at rubber toilet couplers  for the intake hose   3" was 2 big and 2" was 2 small.  for 6$ if it fit  who cares right............ I'll keep looking
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly