Author Topic: A/C Compressor Clutch Replacement (Read 1328 times)

854x4 · « **on:** Feb 05, 2006, 03:08:03 PM »

The bearings in the pully on the a/c compressor are shot. For the price of the bearings I found out I could replace the whole clutch unit so I'm going to do that. My question is do I need any special tools to break apart the clutch from the rest of the compressor? Has any one ever done this before? I live in the valley and no a/c is not an option.

79coyotefrg · « **Reply #1 on:** Feb 05, 2006, 06:45:45 PM »

you should be able too but i tried awhile back and couldnt get the sucker off

Author Topic: A/C Compressor Clutch Replacement (Read 1328 times)

854x4

A/C Compressor Clutch Replacement

79coyotefrg

Re: A/C Compressor Clutch Replacement

Related Topics


	Author Topic: A/C Compressor Clutch Replacement (Read 1328 times) 0 Members and 1 Guest are viewing this topic. 854x4 Rock Master Turtle Points: 722 Posts: 160 Member since Aug '04 Crawling with Marlin A/C Compressor Clutch Replacement « on: Feb 05, 2006, 03:08:03 PM » The bearings in the pully on the a/c compressor are shot. For the price of the bearings I found out I could replace the whole clutch unit so I'm going to do that. My question is do I need any special tools to break apart the clutch from the rest of the compressor? Has any one ever done this before? I live in the valley and no a/c is not an option. Logged 1985 Toyota X-Cab 22-RE 4.88 gears Detroit Locker Rear, Open Front 4 1/2" Lift 32x11.50 BFG Mud on 15x10 rims. LC Rotors, 92 IFS Calipers,MC,Dual Diaphram Booster. 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: A/C Compressor Clutch Replacement « Reply #1 on: Feb 05, 2006, 06:45:45 PM » you should be able too but i tried awhile back and couldnt get the sucker off Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way