A/C Compressor Clutch Replacement

Started by 854x4, February 05, 2006, 03:08:03 PM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

854x4

February 05, 2006, 03:08:03 PM
 The bearings in the pully on the a/c compressor are shot. For the price of the bearings I found out I could replace the whole clutch unit so I'm going to do that. My question is do I need any special tools to break apart the clutch from the rest of the compressor? Has any one ever done this before? I live in the valley and no a/c is not an option.
1985 Toyota X-Cab 22-RE 4.88 gears Detroit Locker Rear, Open Front 4 1/2" Lift 32x11.50 BFG Mud on 15x10 rims. LC Rotors, 92 IFS Calipers,MC,Dual Diaphram Booster.

79coyotefrg

#1
February 05, 2006, 06:45:45 PM
you should be able too but i tried awhile back and couldnt get the sucker off
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way
Print
Go Up Pages1
User actions