Author Topic: Grinding noise (Read 4768 times)

ksmith · « **on:** Sep 17, 2005, 11:17:26 PM »

Tonight a couple of us went out wheeling and I beat on my truck pretty hard and when we were leaving to head home I noticed a loud grinding noise coming from the front right hub. I unlocked the hubs and the t-case and it would quit so I don't think it's the bearings. I don't know if it could be the hub, or the birf, but I'm hoping it's not the birfs because they're 30 spline longs(doubt it's this but not sure). Tomorrow I'm going to pull it apart and see, but if anyone has any ideas of what to look for and what it may be let me know.
Thanks, Kane Smith
jkanesmith@hotmail.com

wa4x4 · « **Reply #1 on:** Sep 17, 2005, 11:40:50 PM »

It might be the birf, but I'm not 100% sure

hopefully its not!

79coyotefrg · « **Reply #2 on:** Sep 18, 2005, 08:50:21 AM »

sounds like a birf

ksmith · « **Reply #3 on:** Sep 18, 2005, 05:06:11 PM »

Thanks for the replies, if anyone thinks it could be something else let me know.
Thanks again, Kane Smith

91 super yoda · « **Reply #4 on:** Sep 18, 2005, 07:26:14 PM »

sounds like the rotory girder is all out of wack, when you beat on them real hard it throws the bands out in the flux capacitor which is glued to the girder, but man let me tell ya them girders are no joke, you've really gotta pound on them hard for one to take a

on your chest . if i were you i would go to boob joints, at least they have greasable nipples.

bring it to the house and we'll stick a wrench on it and see what we cant figure out.

ksmith · « **Reply #5 on:** Sep 18, 2005, 08:01:44 PM »

Thanks Randy, Those always give me trouble, be glad your IFS doesnt have that.

79coyotefrg · « **Reply #6 on:** Sep 25, 2005, 09:20:37 AM »

hey Kane, have you and Randy signed in on the local thread http://board.marlincrawler.com/index.php?topic=6113.0

79coyotefrg · « **Reply #7 on:** Sep 25, 2005, 09:24:13 AM »

i have some stock birfs i'll give it to ya if you want to come get it

ksmith · « **Reply #8 on:** Sep 25, 2005, 03:58:23 PM »

I found out that it was the passenger side birf was seized up and would turn if it was straight but if I turned it would seize up and not want to straighten out. I called Longfield and they said to send it back and they would rebuild it or replace it if they couldn't fix it. Now I just have to put it in the mail and get it to them. Thanks for the offer on the stock birf but I already have on but I'm just going to wait for the other one to get fixed so I'll still have a trail spare. Thanks again.
Kane Smith
jkanesmith@hotmail.com

79coyotefrg · « **Reply #9 on:** Sep 25, 2005, 04:22:44 PM »

anytime, maybe we can get together at Gilmer sometime

ksmith · « **Reply #10 on:** Sep 26, 2005, 09:01:03 PM »

I'm always up for a trip to Gilmer, we go all the time. Next time you go let us know and we'll try to meet up out there. Thanks again.
Kane

Author Topic: Grinding noise (Read 4768 times)

ksmith

Grinding noise

wa4x4

Re: Grinding noise

79coyotefrg

Re: Grinding noise

ksmith [OP]

Re: Grinding noise

91 super yoda

Re: Grinding noise

ksmith [OP]

Re: Grinding noise

79coyotefrg

Re: Grinding noise

79coyotefrg

Re: Grinding noise

ksmith [OP]

Re: Grinding noise

79coyotefrg

Re: Grinding noise

ksmith [OP]

Re: Grinding noise

Related Topics


	Author Topic: Grinding noise (Read 4768 times) 0 Members and 1 Guest are viewing this topic. ksmith Rock Master Turtle Points: 94 Posts: 139 Member since Mar '05 Crawling with Marlin Grinding noise « on: Sep 17, 2005, 11:17:26 PM » Tonight a couple of us went out wheeling and I beat on my truck pretty hard and when we were leaving to head home I noticed a loud grinding noise coming from the front right hub. I unlocked the hubs and the t-case and it would quit so I don't think it's the bearings. I don't know if it could be the hub, or the birf, but I'm hoping it's not the birfs because they're 30 spline longs(doubt it's this but not sure). Tomorrow I'm going to pull it apart and see, but if anyone has any ideas of what to look for and what it may be let me know. Thanks, Kane Smith jkanesmith@hotmail.com Logged Make it or break it! (I usually break it) wa4x4 The 1.5K Club Turtle Points: -310 Posts: 1,569 Member since Jul '05 I'm about to tear the curb up Re: Grinding noise « Reply #1 on: Sep 17, 2005, 11:40:50 PM » It might be the birf, but I'm not 100% sure hopefully its not! Logged 2007 Satin white pearl STi- mostly stock 2006 WRX TR 320whp 343wtq, taken in a road rage wreck 1998 4runner, needs to become wheeler status 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: Grinding noise « Reply #2 on: Sep 18, 2005, 08:50:21 AM » sounds like a birf Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way ksmith [OP] Rock Master Turtle Points: 94 Posts: 139 Member since Mar '05 Crawling with Marlin Re: Grinding noise « Reply #3 on: Sep 18, 2005, 05:06:11 PM » Thanks for the replies, if anyone thinks it could be something else let me know. Thanks again, Kane Smith Logged Make it or break it! (I usually break it) 91 super yoda Crawler Guru Turtle Points: -56 Posts: 400 Member since Sep '04 Axe' em Jacks Re: Grinding noise « Reply #4 on: Sep 18, 2005, 07:26:14 PM » sounds like the rotory girder is all out of wack, when you beat on them real hard it throws the bands out in the flux capacitor which is glued to the girder, but man let me tell ya them girders are no joke, you've really gotta pound on them hard for one to take a on your chest . if i were you i would go to boob joints, at least they have greasable nipples. bring it to the house and we'll stick a wrench on it and see what we cant figure out. Logged ksmith [OP] Rock Master Turtle Points: 94 Posts: 139 Member since Mar '05 Crawling with Marlin Re: Grinding noise « Reply #5 on: Sep 18, 2005, 08:01:44 PM » Thanks Randy, Those always give me trouble, be glad your IFS doesnt have that. Logged Make it or break it! (I usually break it) 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: Grinding noise « Reply #6 on: Sep 25, 2005, 09:20:37 AM » hey Kane, have you and Randy signed in on the local thread http://board.marlincrawler.com/index.php?topic=6113.0 Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: Grinding noise « Reply #7 on: Sep 25, 2005, 09:24:13 AM » i have some stock birfs i'll give it to ya if you want to come get it Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way ksmith [OP] Rock Master Turtle Points: 94 Posts: 139 Member since Mar '05 Crawling with Marlin Re: Grinding noise « Reply #8 on: Sep 25, 2005, 03:58:23 PM » I found out that it was the passenger side birf was seized up and would turn if it was straight but if I turned it would seize up and not want to straighten out. I called Longfield and they said to send it back and they would rebuild it or replace it if they couldn't fix it. Now I just have to put it in the mail and get it to them. Thanks for the offer on the stock birf but I already have on but I'm just going to wait for the other one to get fixed so I'll still have a trail spare. Thanks again. Kane Smith jkanesmith@hotmail.com Logged Make it or break it! (I usually break it) 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: Grinding noise « Reply #9 on: Sep 25, 2005, 04:22:44 PM » anytime, maybe we can get together at Gilmer sometime Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way ksmith [OP] Rock Master Turtle Points: 94 Posts: 139 Member since Mar '05 Crawling with Marlin Re: Grinding noise « Reply #10 on: Sep 26, 2005, 09:01:03 PM » I'm always up for a trip to Gilmer, we go all the time. Next time you go let us know and we'll try to meet up out there. Thanks again. Kane Logged Make it or break it! (I usually break it)