Author Topic: Starting problem (Read 1295 times)

ratzila · « **on:** Jun 01, 2005, 02:59:19 PM »

I have an 85 4 runner with the 22re motor. I can start the engine fine but when it warms up you can cut it off and the thing will not start until the motor cools down. A friend of mine had me run a jumper wire for the fuel pump to leave it on all the the time. Has anyone else had this problem? Thanks, David

b_ripper8 · « **Reply #1 on:** Jun 01, 2005, 03:13:07 PM »

Your starter may also be over heating. I've had that problem and it's a simple fix with a heat shield.

Author Topic: Starting problem (Read 1295 times)

ratzila

Starting problem

b_ripper8

Re: Starting problem

Related Topics


	Author Topic: Starting problem (Read 1295 times) 0 Members and 1 Guest are viewing this topic. ratzila Rock Crawl'n Turtle Points: 18 Posts: 25 Member since Dec '04 Crawling with Marlin Starting problem « on: Jun 01, 2005, 02:59:19 PM » I have an 85 4 runner with the 22re motor. I can start the engine fine but when it warms up you can cut it off and the thing will not start until the motor cools down. A friend of mine had me run a jumper wire for the fuel pump to leave it on all the the time. Has anyone else had this problem? Thanks, David Logged b_ripper8 Rock Master Turtle Points: 371 Posts: 275 Member since May '04 3RZ-FE power is that much closer. Re: Starting problem « Reply #1 on: Jun 01, 2005, 03:13:07 PM » Your starter may also be over heating. I've had that problem and it's a simple fix with a heat shield. Logged In Progress: 3RZ-FE Swap Underway. Currently: 87' 4Runner - SAS - 5.29's - welded rear - Dual 2.28 cases - Optima bluetop - round headlight conversion - FZJ80 grill - rattlecan paint job - trimmed fenders - Ranger hybrid springs front - Tacoma hybrid springs rear - schedule 160 drivelines 8" slip front - Marlin's crossmember - disk brake conversion