Author Topic: 3RZ swap wiring question (Read 2212 times)

SFD4x4 · « **on:** May 23, 2010, 08:32:42 PM »

I am in the middle of wiring up my 3rz swap into my 83 and have a question about wiring the ignition. On my 83 I have the ignition spots IG1, ST1, ACC and AM. On the 96 ignition it has IG1, IG2, ST1, ST2, AM1, AM2 and ACC. My question is how do I make the extra spots in the ignition to mate the 2 ignitions together? ie how do I create the IG2, ST2, AM2, in my 83 ignition or do I even need to make these spots, can I just connect IG1 and IG2 together and so forth? Any help on how to do this would be much appreciated. I have figured all the rest of the wiring out except for this and it is driving me crazy!

SFD4x4 · « **Reply #1 on:** Jun 02, 2010, 10:27:04 PM »

Anyone?

notyourmomslx450 · « **Reply #2 on:** Jun 09, 2010, 12:28:22 PM »

Look here: http://board.marlincrawler.com/index.php?topic=19275.0
first thread in this forum. Also might help to ask there if you don't find the answer.

SFD4x4 · « **Reply #3 on:** Jun 10, 2010, 12:39:52 PM »

Thanks. I have read that entire forum and I did ask there before i asked here. I figured it out anyway.

Author Topic: 3RZ swap wiring question (Read 2212 times)

SFD4x4

3RZ swap wiring question

SFD4x4 [OP]

Re: 3RZ swap wiring question

notyourmomslx450

Re: 3RZ swap wiring question

SFD4x4 [OP]

Re: 3RZ swap wiring question

Related Topics


	Author Topic: 3RZ swap wiring question (Read 2212 times) 0 Members and 1 Guest are viewing this topic. SFD4x4 Rock Master Turtle Points: 4 Posts: 218 Member since Mar '10 3RZ swap wiring question « on: May 23, 2010, 08:32:42 PM » I am in the middle of wiring up my 3rz swap into my 83 and have a question about wiring the ignition. On my 83 I have the ignition spots IG1, ST1, ACC and AM. On the 96 ignition it has IG1, IG2, ST1, ST2, AM1, AM2 and ACC. My question is how do I make the extra spots in the ignition to mate the 2 ignitions together? ie how do I create the IG2, ST2, AM2, in my 83 ignition or do I even need to make these spots, can I just connect IG1 and IG2 together and so forth? Any help on how to do this would be much appreciated. I have figured all the rest of the wiring out except for this and it is driving me crazy! Logged 83 pickup, 4.88s, chevys in rear, RUF, Dual Transfers, flat belly, 3RZ swap, disc brake x4, rollin on 36" irocs IF YOU SEE A 20' PAC WEST/CARSON FLAT BED TRAILER FOR SALE CHECK OUT THE STOLEN SECTION. IT MIGHT BE MINE!!!! SFD4x4 [OP] Rock Master Turtle Points: 4 Posts: 218 Member since Mar '10 Re: 3RZ swap wiring question « Reply #1 on: Jun 02, 2010, 10:27:04 PM » Anyone? Logged 83 pickup, 4.88s, chevys in rear, RUF, Dual Transfers, flat belly, 3RZ swap, disc brake x4, rollin on 36" irocs IF YOU SEE A 20' PAC WEST/CARSON FLAT BED TRAILER FOR SALE CHECK OUT THE STOLEN SECTION. IT MIGHT BE MINE!!!! notyourmomslx450 Rock Master Turtle Points: 0 Posts: 200 Member since Jan '08 Re: 3RZ swap wiring question « Reply #2 on: Jun 09, 2010, 12:28:22 PM » Look here: http://board.marlincrawler.com/index.php?topic=19275.0 first thread in this forum. Also might help to ask there if you don't find the answer. Logged -Jason "Daily Destroyer"-'94 xtra cab, solid axle, longs super set, 5.29s, detroits, dual ultimate, 37" MTRs, bobbed 12", Gulf Coast Crawl Shop bumpers, custom dents "The Anchor"-'97 LX450, OME J-springs & L-shocks, spring spacers, wheel spacers, 35" Super Swamper SSRs, ARB, rack, it's just getting started SFD4x4 [OP] Rock Master Turtle Points: 4 Posts: 218 Member since Mar '10 Re: 3RZ swap wiring question « Reply #3 on: Jun 10, 2010, 12:39:52 PM » Thanks. I have read that entire forum and I did ask there before i asked here. I figured it out anyway. Logged 83 pickup, 4.88s, chevys in rear, RUF, Dual Transfers, flat belly, 3RZ swap, disc brake x4, rollin on 36" irocs IF YOU SEE A 20' PAC WEST/CARSON FLAT BED TRAILER FOR SALE CHECK OUT THE STOLEN SECTION. IT MIGHT BE MINE!!!!