Author Topic: yotadorks work truck build. ( new 4runner pics 2/9/07) (Read 16060 times)

6.72:1 · « **Reply #30 on:** Dec 10, 2006, 02:25:43 PM »

I love brake steer.
Other drivers love it too!

yotadork83 · « **Reply #31 on:** Dec 18, 2006, 07:13:45 AM »

All right i am stealing the propane set up off of my ninja build because i am going to put a 7mge in there and the set up is up for grabs. so here lies the problem i want to use my 20r head that is built like crazy becuase the stock 22r head is boaring, and to fit the 20 head on ther i have to get flat top pistons. i also herd that turbo and 20r head is to much compresion. so i was wondering if a set of turbo pistons that are dished would help lower the compresion, and would they fit? i am hoping to get the turbo setup from got propane asap. i just want to build the block before and need to know if i can use my ported 20 head.

oh yeah and i got board this weekend and installed my wheels and tires off of the ninja buiold just for shits and gigles. they fit perfect and look awsome i cant evan tell a los in power just the gearing is goofy but i still keep up with trafic on the free way just fine.

yotadork83 · « **Reply #32 on:** Dec 29, 2006, 09:59:21 PM »

sorry guy's its been awhile and havent done much. i have been addicted to oxycotin for a while now and i am quiting cold turky and it's realy a pain, but i know i will benifit from it termendisly.i am sorry if off topic but i think that this board is full of awsome people that are very supportive. on a lighter note got to go snow wheeling in the misses 4runner she took a bunch of pics on her new camera that she got for x-mas and hasent downloaded the softwere for it yet.

6.72:1 · « **Reply #33 on:** Dec 30, 2006, 09:00:21 PM »

Quote from: yotadork83 on Dec 29, 2006, 09:59:21 PM

sorry guy's its been awhile and havent done much. i have been addicted to oxycotin for a while now and i am quiting cold turky and it's realy a pain, but i know i will benifit from it termendisly.i am sorry if off topic but i think that this board is full of awsome people that are very supportive. on a lighter note got to go snow wheeling in the misses 4runner she took a bunch of pics on her new camera that she got for x-mas and hasent downloaded the softwere for it yet.

Whoa dude. Yeah, you must definitely rid yourself of that addiction!

I can't wait to see your wheeling photographs.

yotadork83 · « **Reply #34 on:** Jan 02, 2007, 05:30:39 AM »

thanks 6.72:1 i am finally starting to fell normal agin it was a pregnant dog to fall asleep it might have been easer if i drank but i dont drink. i found a natural rtc ramp when i took my dogs for a run yestarday so i am going back to day for some pics.

yotadork83 · « **Reply #35 on:** Jan 02, 2007, 06:21:26 AM »

i was wondering how what the length of a stock short bed is because i am bobbing the bed and i want to be able to put a new camper shell on it.

yotadork83 · « **Reply #36 on:** Jan 03, 2007, 05:15:57 AM »

pics of fooling around

yotadork83 · « **Reply #37 on:** Jan 03, 2007, 10:50:02 AM »

had to resise the other pics so here they are.

yotadork83 · « **Reply #38 on:** Jan 03, 2007, 10:52:10 AM »

some more

yotadork83 · « **Reply #39 on:** Jan 03, 2007, 10:56:21 AM »

oh yeah and pics of the truck on 37 mtr's

AaronB · « **Reply #40 on:** Jan 03, 2007, 12:54:58 PM »

Mine measured at 74"

yotadork83 · « **Reply #41 on:** Jan 03, 2007, 02:28:37 PM »

the length of your short bed right?

AaronB · « **Reply #42 on:** Jan 03, 2007, 04:01:40 PM »

yeah-thats outside edge to edge

yotadork83 · « **Reply #43 on:** Jan 03, 2007, 05:11:31 PM »

cool thanks that just what i wanted as soon as i find a good looking camper i am going to chop the bed up.

milla85 · « **Reply #44 on:** Jan 03, 2007, 07:12:45 PM »

How does the steering work with the axle moved forward? did you have to cut down the drag link to compinsate for the axle being moved forward. Am i right about if the axle is moved forward, then the drag link would be to long, so if it was shortned the same amount the axle was moved forward it would be the same right? Oh and does marlin make axle relocation plates? Thanks a lot and cool rig! - Nick

yotadork83 · « **Reply #45 on:** Jan 03, 2007, 07:21:50 PM »

i know he does for the rear not sure if he has them for the front. also on the drag link i did have to shorten it and rotate it make it work for the ball flip. i wouldn't rely on the fact that you moved it forward " " so you should cut out " ". just cut it in half move the axle farward what ever you want cut off the over lap plus a weld gap weld it bact togther grind it down and gusset over the weld. also make sure your steering wheel is close to center as possible.

yotadork83 · « **Reply #46 on:** Jan 05, 2007, 07:13:16 AM »

i was thinking about reinstalling my flatbed on page one. i would have to modify it for fender clearance foe 37's. also i got got my new wheels in yestarday. cool thing is that i orderd the raw finish and the sent me a raw wheel with no clear coat. so in stead of 95 a wheel i got them at cost for 52 a wheel. so free 37 tsl's and super cheap wheel's to fit them = sweeet

!!! pics as soon as i mount them up.

yotadork83 · « **Reply #47 on:** Jan 09, 2007, 07:24:54 PM »

got some pics of the new tires and wheels cheack out the texture on the wheels it's hammered grey.

yotadork83 · « **Reply #48 on:** Jan 09, 2007, 07:26:08 PM »

oh yeah and posing in my front ditch

Gittinit · « **Reply #49 on:** Jan 09, 2007, 08:16:37 PM »

free 37'' ssr, sweet, I love free. nice flex too!

6.72:1 · « **Reply #50 on:** Jan 13, 2007, 01:20:13 AM »

I like it!

Doosty · « **Reply #51 on:** Jan 14, 2007, 12:48:25 AM »

who balanced the tires?? i dont find a diff balancing anything aggresive and over 35;s

yotadork83 · « **Reply #52 on:** Jan 14, 2007, 08:45:49 AM »

i have a friend at discount that does every thing for me. i wouldent know if it makes a difference because i always get them balenced for free.

yotadork83 · « **Reply #53 on:** Feb 05, 2007, 04:30:21 PM »

my new 4runner that i picked up four 500 bucks from zuk gear installer. drove it home with 127k on it. it's got a 3.0 and a automatic tranny but who cares. a low profile sas with 35's is coming as soon as i find an extra housing. it all ready has 5.29's on the rear and the front 4x4 is gone so that just one less thing to remove. i had to cut all of the bumpers up so it wasent so awkard (sorry zuk). pics before the chop.

yotadork83 · « **Reply #54 on:** Feb 05, 2007, 04:32:31 PM »

more pics of how i got and the last is all of the toys that are in my yard currently.

DTB · « **Reply #55 on:** Feb 05, 2007, 04:40:59 PM »

wtf is alll that crap welded on there??

Doable · « **Reply #56 on:** Feb 05, 2007, 07:04:40 PM »

yotadork83, Man I lift the way you kept the lift to a minimal to fit those tires.

I'm going to try to put my 35" with a small lift and just trim the fenders and the back of the front fenders

yotadork83 · « **Reply #57 on:** Feb 09, 2007, 07:23:51 PM »

found a pic of what i want the runner to look like in the end.

and pics of the runner without the goofy bumpers.

yotadork83 · « **Reply #58 on:** Feb 10, 2007, 08:38:29 AM »

one more of the fixed bumpers

pics of the first fender cut's with my nifty electric tin snips

and i found treasure stashed in the side of the truck.

yotadork83 · « **Reply #59 on:** Feb 10, 2007, 08:46:29 AM »

pics with stock suspension and my 37" spare after fender hack.

also the gap that i have to fill in and the piece that is going to be welded in.

yotadork83 [OP]

yotadork83 [OP]

yotadork83 [OP]

yotadork83 [OP]

yotadork83 [OP]

yotadork83 [OP]

yotadork83 [OP]

yotadork83 [OP]

yotadork83 [OP]

yotadork83 [OP]

yotadork83 [OP]

yotadork83 [OP]

yotadork83 [OP]

yotadork83 [OP]

yotadork83 [OP]

yotadork83 [OP]

yotadork83 [OP]

yotadork83 [OP]

yotadork83 [OP]

yotadork83 [OP]

Related Topics