I haven't seen those. If I replace it with the felpro intake gasket with the red sealant built in would that be good?
Or, does Napa sell that thick chunk of plastic.
Also, do I need to remove the air cleaner to check with the propane torch for leaks? I am asking because if the carb senses propane it will affect it. I suppose I could put a piece of sheet metal blocking the carb while I am running the torch along the intake wall.
In my experience spraying starter fluid into the intake where there is a leak makes the RPM's go down and the rig to run like crap. In my case spraying it in there makes the RPM's go up.
