Author Topic: TWISTEDTOYS 92 SAS-->7MGTE/R151F SWAP and FJZ80's in the works (Read 150890 times)

twistedtoy92 · « **Reply #150 on:** Jan 29, 2009, 10:45:54 PM »

yeah, the supports for the front hoops arent tacked, need to grind them but the front hoops, stablizer bracket, and rear hoop are tacked! my welder is going to finish those up tomorrow then saturday we are boxing the rear of the frame.... my hysteer is close but no way it will bind or touch! i am having to mount shackle hanger under my frame for the front and run boomerangs for the correct caster/pinion angle but thats ok.... if i want to switch to marlins springs then i already have the shackle mounts for those through the frame!

All i need after that is to weld on my rear diff armor and shock tabs, gusset the rear front spring hanger for more beef, set up my bumpstops, and throw the bed on/shave it!

things are coming together, and the CAT RUNS LIKE A floppIN CHAMP

I gained alot of respect off of that INFRAME.... feels good!

I also passed my TH200 rebuild at school on the dyno! Things are going my way but it is testing me BIG TIME!

Next Wednesday it should be driving! I am also going to get a 12inch slip for my front DL......
ENJOY $Beer Chug\'n$

Poll

What to do.... stock 2.28's with 23 or 21 spline in rear OR 4.7 in the rear case???

Author Topic: TWISTEDTOYS 92 SAS-->7MGTE/R151F SWAP and FJZ80's in the works (Read 150890 times)

twistedtoy92

Re: TWISTEDTOYS 92 SAS-->STARTING MY SAS TOMORROW!!!!!!!!!

Related Topics


	Poll What to do.... stock 2.28's with 23 or 21 spline in rear OR 4.7 in the rear case??? 2.28's 21 total spline 0 (0%) 2.28's 23 total spline 5 (38.5%) 2.28 & 4.7 21 total spline 1 (7.7%) 2.28 & 4.7 23 total spline 7 (53.8%) Total Members Voted: 13


	Author Topic: TWISTEDTOYS 92 SAS-->*7MGTE/R151F SWAP and FJZ80's in the works* (Read 150890 times) 0 Members and 38 Guests are viewing this topic. twistedtoy92 Silver Turtle Award Turtle Points: -255 Posts: 3,781 Member since Dec '06 NFM Customs Re: TWISTEDTOYS 92 SAS-->STARTING MY SAS TOMORROW!!!!!!!!! « Reply #150 on: Jan 29, 2009, 10:45:54 PM » yeah, the supports for the front hoops arent tacked, need to grind them but the front hoops, stablizer bracket, and rear hoop are tacked! my welder is going to finish those up tomorrow then saturday we are boxing the rear of the frame.... my hysteer is close but no way it will bind or touch! i am having to mount shackle hanger under my frame for the front and run boomerangs for the correct caster/pinion angle but thats ok.... if i want to switch to marlins springs then i already have the shackle mounts for those through the frame! All i need after that is to weld on my rear diff armor and shock tabs, gusset the rear front spring hanger for more beef, set up my bumpstops, and throw the bed on/shave it! things are coming together, and the CAT RUNS LIKE A floppIN CHAMP I gained alot of respect off of that INFRAME.... feels good! I also passed my TH200 rebuild at school on the dyno! Things are going my way but it is testing me BIG TIME! Next Wednesday it should be driving! I am also going to get a 12inch slip for my front DL...... ENJOY $Beer Chug\'n$ Logged 2005 Audi A4 2.0T Quattro 380 AWHP @ 24psi 1993 Toyota Pickup http://board.marlincrawler.com/index.php?topic=72886.msg866982#msg866982 1992 Toyota Pickup http://board.marlincrawler.com/index.php?topic=49319.msg616251#msg616251 1985 4runner http://board.marlincrawler.com/index.php?topic=60737.msg745263#msg745263 "TRIPLE CASES GETS YOU LAID." -BigMike "I daily drive this thang everyday." (swapped89)