What is required to spray the durabak liner? I take it you did it yourself. Is it something anybody can do themselves?
Actually it was a lot easier to do than what I was expecting. Of course, starting off you need to do the prep work which is nothing more than giving it a good sanding with 60 grit to get a rough surface for the bedliner to grab hold of. Then you need a good compressor and an undercoating gun which I got from Eastwood for under $20. I shot mine at around 60 psi and that seemed to work really well. Here's a link to the gun I used.
http://www.eastwoodco.com/jump.jsp?itemID=1126&itemType=PRODUCT
