Hello, this is my Pile: 1986 4Runner SR5

Started by BigBluePile, November 21, 2014, 04:02:20 AM

0 Members and 1 Guest are viewing this topic.

BigBluePile

I think the carrier pigeon I sent got intercepted by the government. 

Sent from my 0PJA2 using Tapatalk

'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

BigBluePile

Went out with some friends had a good day. 


Sent from my 0PJA2 using Tapatalk
'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

BigBluePile

Well, found snow.  Had a good time.  Goodyear Kevlar mtrs were not as good as I hoped for. 

Sent from my 0PJA2 using Tapatalk

'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

SqWADoosh

Quote from: BigBluePile on December 11, 2016, 08:46:34 PM
Well, found snow.  Had a good time.  Goodyear Kevlar mtrs were not as good as I hoped for. 

Sent from my 0PJA2 using Tapatalk

Little birdie told me you didn't air down enough  :psss:

BigBluePile

Had them down to 15 and then about 12 ish.  Still didn't even look like they were even bled out.  Guess I'll let all the air out next time....lolz

Sent from my 0PJA2 using Tapatalk

'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

OVRAROK

Even the most primitive society, has an intimate respect for the insane.

BigBluePile

Nice.  Well, I'll try it lower next time.  For the most part they did ok and as long as I had the momentum, I chugged along. 

Sent from my 0PJA2 using Tapatalk

'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

SqWADoosh

You want to be at 2 to 3 psi for that type of snow.

BigBluePile

Interesting.   Had a good time and being prepared made for shenanigans always makes the day smoother. 

We got pretty dang far though! 

Sent from my 0PJA2 using Tapatalk

'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

SqWADoosh

Quote from: BigBluePile on December 12, 2016, 07:15:52 AM
Interesting.   Had a good time and being prepared made for shenanigans always makes the day smoother. 

We got pretty dang far though! 

Sent from my 0PJA2 using Tapatalk

My buddy is buddies with one of the guys you went with. He was showing me pictures of them up there and I immediately saw your truck.

BigBluePile

Who?  A buddies buddy buddies ?

Sent from my 0PJA2 using Tapatalk

'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

SqWADoosh

Quote from: BigBluePile on December 12, 2016, 11:48:48 AM
Who?  A buddies buddy buddies ?

Sent from my 0PJA2 using Tapatalk

My buddie's name is Brian. He drives a long travel 2nd gen Tacoma. Don't know who his buddy is. Probably a guy with a Tacoma.

BigBluePile

Quote from: SqWADoosh on December 12, 2016, 12:39:08 PM
My buddie's name is Brian. He drives a long travel 2nd gen Tacoma. Don't know who his buddy is. Probably a guy with a Tacoma.
Hmmmm....no idea.  Anywho, it was a lot of fun.  I haven't been in that much snow in a very long time

Sent from my 0PJA2 using Tapatalk

'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

BigBluePile

So, I did some electrical troubleshooting the other day.  Looks like I have about and 1/8 amp draw.  May not sound like enough but it's enough.  Once I located the three main drains I still had a draw.  I cannot seem to zero out the flow however.....

Haven't had a chance to install my new hawse factor 55 fairlead.  I also picked up a 30' synthetic winch rope extension and synthetic shackles. 


Sent from my 0PJA2 using Tapatalk

'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

:)bestgen4runner

Quote from: BigBluePile on February 04, 2017, 08:54:22 PM
So, I did some electrical troubleshooting the other day.  Looks like I have about and 1/8 amp draw.  May not sound like enough but it's enough.  Once I located the three main drains I still had a draw.  I cannot seem to zero out the flow however.....

Haven't had a chance to install my new hawse factor 55 fairlead.  I also picked up a 30' synthetic winch rope extension and synthetic shackles. 


Sent from my 0PJA2 using Tapatalk




How are you measureing the draw. Meter I assume, but from where to where. Just Checking......
Max draw spec is 50 milliamps for any vehicle.
I can help You. I know a bit about amps, Ohms, and Oh Yeh..... Volts.
Why have have you never wheeled with us before?
I am 1/5th of Perfect Fit
SqWADoosh [04:19 PM]: *sigh* I guess Chris is right and I just need to wait until I'm in a place where I have a tow rig and trailer before I get this caliber of truck
Mudder [08:28 PM]:   not try to be a jerk, but are you serious bestgen?
Prismo [06:11 PM]:   Done, time to relax or as Bestgen says....FREEDOM!
HogCanyonHopper [06:54 PM]:   I like my little rod. it gets the job done
H8PVMNT [03:30 PM]: I can go both ways.

BigBluePile



Quote from: :)bestgen4runner on February 04, 2017, 09:31:33 PM

How are you measureing the draw. Meter I assume, but from where to where. Just Checking......
Max draw spec is 50 milliamps for any vehicle.
I can help You. I know a bit about amps, Ohms, and Oh Yeh..... Volts.
Why have have you never wheeled with us before?

Two part question....

First part, 10amp DC on my multimeter.  Then I did a voltage drop check on every fuse in my rig.  Then it started raining and I stopped at that point.  What I assumed was that I could get the reading down to zero..... :dunno:

Second part, I'm selfish :D.

Sent from my 0PJA2 using Tapatalk

'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

BigBluePile




Happy snow shut everything down because people in WA can't handle the snow day.....


:D

Sent from my 0PJA2 using Tapatalk

'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

helipilot77

With the capability of the drivers around here it's honestly best if they shut everything down. I had fun driving around this morning before everything turned to slush.
-1987 SR5 4runner, 1KZ-t turbo diesel with mech. pump
& custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's https://board.marlincrawler.com/index.php?topic=98969.0
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew https://board.marlincrawler.com/index.php?topic=100547.0
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My front axle service write-up http://board.marlincrawler.com/i

BigBluePile

Quote from: helipilot77 on February 06, 2017, 07:32:00 PM
With the capability of the drivers around here it's honestly best if they shut everything down. I had fun driving around this morning before everything turned to slush.
Indeed.  Had two roll overs in my area, before noon....

I was reaaaaalllly itching to hit up Walker. 

Sent from my 0PJA2 using Tapatalk

'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

BigBluePile

#109
Went to replace my roller fairlead with my new Factor55 hawse one and it won't work.....without a little modification.   Of course.   So, know I have to pull the winch, modify the bumper and bore out the mounting holes on the fairlead a smidgen.   

Sent from my 0PJA2 using Tapatalk
'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

BigBluePile

So, that was fun

Sent from my 0PJA2 using Tapatalk

'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

BigBluePile

Well, that's that.

Sent from my 0PJA2 using Tapatalk

'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

:)bestgen4runner

Maybe give some additional info?
Looks like you broke down at a
rest stop?
I am 1/5th of Perfect Fit
SqWADoosh [04:19 PM]: *sigh* I guess Chris is right and I just need to wait until I'm in a place where I have a tow rig and trailer before I get this caliber of truck
Mudder [08:28 PM]:   not try to be a jerk, but are you serious bestgen?
Prismo [06:11 PM]:   Done, time to relax or as Bestgen says....FREEDOM!
HogCanyonHopper [06:54 PM]:   I like my little rod. it gets the job done
H8PVMNT [03:30 PM]: I can go both ways.

BigBluePile

Quote from: :)bestgen4runner on July 06, 2017, 02:30:01 PM
Maybe give some additional info?
Looks like you broke down at a
rest stop?
Blew the rear end on the way to work.  Now, I have an excuse to build my high pinion elocker for the front. 

Sent from my 0PJA2 using Tapatalk

'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

BigBluePile

Got most the parts I should need to build my HP front elocker.  Justdifferentials.com was awesome and super quick plus free shipping!   Went ahead and ordered 29 spline stuff.  Apparently, that's a thing.  I'm excited to install this and see my driveline angles. 

Also, ordered a ~$20 headlight relay conversion harness and installed it.  Super quick and plugged right in.   

Sent from my 0PJA2 using Tapatalk

'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

BigBluePile

So, that's a start...

Sent from my 0PJA2 using Tapatalk

'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

joeyf

So did you break on the bridge or pull over before crossing?

BigBluePile

Quote from: joeyf on July 22, 2017, 12:12:01 AM
So did you break on the bridge or pull over before crossing?
I was heading south over the bridge, pulled over to check on things.  I was hearing a suspect noise.  Went to leave and that's when it went boom. 

Sent from my 0PJA2 using Tapatalk

'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

BigBluePile

So much win. 

Sent from my 0PJA2 using Tapatalk

'86 4Runner SR5 TRD 5VZ-FE
...slightly modified from OEM...

THK Matt

do did you just move the LP front diff to the rear? making room for your HP Excuse :boobs:
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13