75-95 Toyota Pickup Truck 4Runner Part Liquidation Venue OEM ETC I ship from CT

[:)bestgen4runner]

Looking for a nice radio bezel for a second gen truck or 1st gen 4runner. Gray and uncut.
Everything I find has been chopped up.

[Erick561]

Looking for a nice radio bezel for a second gen truck or 1st gen 4runner. Gray and uncut.
Everything I find has been chopped up.

currently out of radio surround bezels, you need single decker radio design?

[:)bestgen4runner]

currently out of radio surround bezels, you need single decker radio design?

I think that it's called single din?
Yes that's what I meant but uncut

[Yotaoverland]

Do you happen to have any '79-80 tail gates? The double latch style, hopefully in tan?

[Erick561]

Sorry those are hard to come by I already sold the red one I had from the plow truck for 125

[Erick561]

I'm shipping $1,400 of orders today but don't worry If you place an order it will go out no later than the following business day

[Erick561]

Parts in stock let.me know

[aaron63]

82 driver door panel, Brown.
Center seatbelt, both male and female sides? (Going from two seater to one seater.)


Sent from my iPhone using Tapatalk

[Erick561]

82 driver door panel, Brown.
Center seatbelt, both male and female sides? (Going from two seater to one seater.)


Sent from my iPhone using Tapatalk

currently only have blue door panels, and they are the 79-81 style with small handles.  the seat belts i will check on, i might have a set of blue ones, the 81 i parted out had a bench, but i cant remember if the hardware was rotted on the floor

[aaron63]

Thanks


Sent from my iPhone using Tapatalk

[toy_tek]

https://www.ebay.com/usr/erick_86
I have about 10,000 pounds of parts that are not listed and it takes time to make listings so let me know what you need and I'll probably have it on hand or I can Source it in a reasonable time, trying to downsize and help the Offroading community

1st gen pickup interior ac parts needed: evap box & ducting, ac amplifier, and engine bay hardline(s).  Thx




{edited:  engine bay, not bat.  thx autocorrect!}

[Erick561]

The last first generation truck I had with AC was back in 2012 my orange SR5 limited edition truck had corrosive aluminum hardlines the steel banjo nuts were all seized but I sold the system for $300 on eBay.  I will check on my engine battery hardlines.

1st gen pickup interior ac parts needed: evap box & ducting, ac amplifier, and engine bat hardline(s).  Thx

Keep the inquiries coming, I am a power seller

[Erick561]

I do still have a harness for my 1981 hilux plow truck that I parted out in 2016 and I've been holding that as a spare because I drive a 79 and with my luck I might have an electrical fire or something so I don't know if I want to sell that harness right now

[Erick561]

82 driver door panel, Brown.
Center seatbelt, both male and female sides? (Going from two seater to one seater.)


Sent from my iPhone using Tapatalk

I have seat belts

[Erick561]

Shipping out 8 orders so far for tomorrow morning, will text you about seatbelts thanks for your inquiries ladies and gents

[Erick561]

I have gray red and blue seatbelts also can dig through storage unit for brown
Selling an 82 22R tomorrow have to free up my engine stand for the next one that's sitting on a tire rn
Top Rated

[Erick561]

Bump liquidation chop chop first come first serve cleaning up shop will carry more hard to find parts as projects come and go let me know what you need it's collecting dust but could be helping you get to and from work and the trail thanks guys

[zippo]

You have a shiftier for a froward shift tcase?? The tcase shifter that bolts to the trans?

[Erick561]

You have a shiftier for a froward shift tcase?? The tcase shifter that bolts to the trans?

Yes I do have another one and I had 2 on hand but throughout the course of the working weekend for me I ended up misplacing one so I will let you know once I locate it put the new pictures up so that it's available for purchase, I already sold my last one listed today

[zippo]

Not the knob but the shifter itself that bolts to the trans.

[Erick561]

Not the knob but the shifter itself that bolts to the trans.

Aw shoot I will try and get another one, already parted out my last G series drivetrain will try and obtain another one asap

[the_white_shadow]

Any front bumper brackets from a first gen 4x4? If so, send me a pic so i can make sure they are what i need. Thanks.

[Erick561]

These mounted to my frame on my 79

[Erick561]

back to the top

[Erick561]

Bump

[SlayTank]

Hello!

I need a rear parking brake cable for a 85 (Or 84 i think because they had narrow axles) pick up (not sure if 4runners are different they might be the same) base (not sure if the length for extended cabs is in the front or rear cable, Im not sure how long its supposed to be) 4x4 (I think 2wd trucks had different cable set ups). I need a couple other pieces too. They call it the intermediate lever, It connects the front e-brake cable to the rear. I need that with the pin that it pivots on with the C-clip that keeps it in. Also the spring thats attached to the lever. Also the pin that holds the front cable to the lever. also need the cable loops that hold the parking brake cable to the frame and anything that connects the rear parking cable to the actual drums. also the keeper that holds the sheath of the rear cable to the crossmember. I took these pictures of my buddy 86, I think the intermediate lever would be the same but I'm not sure as that stuff is missing on mine.

[SlayTank]

This is my current lack of cable. Oh I need some transfer case bolts too, these 5 if you got any... if not ill have to rustle some up at ace hardware or something. Thanks for helping me out! the local toyota truck junk yard guy is a total  i don't get it he's a total jerk to everyone and he wouldn't even let me come look at his yard so I could see/tell/show him what I need. So I had to go look at my buddys truck instead. I try not to deal with him.

[Djencee]

Im looking for a complete power steering setup for a 1986 toyota pickup 4x4. Need all parts to convert from manual steering; pump, brackets, reservoir, pully, box, idler, etc.. thanks

[Erick561]

This is my current lack of cable. Oh I need some transfer case bolts too, these 5 if you got any...

Pm sent 8603193597

Im looking for a complete power steering setup for a 1986 toyota pickup 4x4. Need all parts to convert from manual steering; pump, brackets, reservoir, pully, box, idler, etc.. thanks

Currently sold.out on a complete IFS 4WD Setup but want to get a couple 2nd gens soon

[Djencee]

Pm sent 8603193597Currently sold.out on a complete IFS 4WD Setup but want to get a couple 2nd gens soon

Right on. Let me know if anything turns up, thanks