75-95 Toyota Pickup Truck 4Runner Part Liquidation Venue OEM ETC I ship from CT

[Speed]

 The Cops just told me I need a working speedometer/odometer for my '81 pick up.    Anyone have a spare they can do without?
   Speed

[cole.price.813]

How much to ship the lower dash with heater control unit combo to 28422

Sent from my SM-G950U using Tapatalk

[Erick561]

The one i have from an 80 is a 4.37 stock what stock gearing speefo are you looking for?  I need a 4.10 stock odometer and i am looking to trade mine that i use every day

[6430]

Have a 89-95 22re air box/ intake tube? Do not need the MAF.

[cruiserguy]

Looking for a 82-83 toyota pickup am/fm radio.  The knobs are centered top to bottom on the 82-83, the 79-81 knobs are down and closer together.   I'm in NC  28461

[Erick561]

Hey i only have a 1981 radio im going to use to fill the hole in my sr5 wood dash sorry for the late response been super busy
I still own 2 storage units that are full of parts so let me know your toyota parts needs.  Thanks

[mudmaster]

Fan shroud for a 1983 PU??

[zippo]

Got an r151? I don't care condition as long as the housing is my broken.

[H8PVMNT]

Found what I was looking for

[Erick561]

Been very busy working again on eBay since the last week of November I still have 100s of parts not listed yet let me know.  Have to ship $1200 of orders so far today sorry for any late responses very busy
I just bought a new phone and then installed my date stamp app and it date stamped right over all of the existing photos on my SD card when I inserted it 
-Toyota Truck Dismantlation

[Erick561]

Good news I hit my cap for the 3rd time so they gave me a 4th promotion so I have more inventory space

[redneckcustoms13]

How about the hvac/stereo surround in wood grain for an 83?

[Erick561]

Hello almost all my 1stgen parts flew off the shelf, I have a wood grain bezel from an 81 it's 79-81 style

[Erick561]

I have to sell an engine and a hard top today,  $1500 of inventory was delivered yesterday, keep the orders coming I am a top rated power seller I don't care if you cut into my time to go to the gym I need to downsize and keep up with my seller fees
  thanks guys

[helipilot77]

Do you have any first gen pickup sun visors in blue with the clips near the rear view mirror?

[Erick561]

I don't think so. The last Hilux had tan interior and I think I only have 2nd and 3rd Gen sun visors on hand right now.
I know I have some solid axle 2nd Gen ones with the 4wd nomenclature

Do you have any first gen pickup sun visors in blue with the clips near the rear view mirror?

[helipilot77]

Thanks anyways. I'm also after some blue first gen door panels if you happen to have any.

[Erick561]

Thanks anyways. I'm also after some blue first gen door panels if you happen to have any.

i think i have one side in blue, its the 79-81 style with small handle
Happy New Year MarlinCrawler

[muddpigg]

Looking for an oil pressure sensor and harness for '86 22re.  To 13601, NY

[Erick561]

Looking for an oil pressure sensor and harness for '86 22re.  To 13601, NY

pm sent, dlx or sr5?

[xcuzzi]

Erik,
I have a 1985 4Runner and I am looking for a late model throttle linkage bell crank set up.  The part that bolts to the intake plenum.  I am not sure the late model will even work on my 4Runner but the early model one I have has so much monkey motion going on that it is sticky and drives me crazy in low speed situations.  I have rebuilt the pedal assembly, new cable, and lubed the bell crank assembly with little lasting improvement.  I think the simpler late model one will be the solution.  Also, I am looking for a couple of the interior A pillar trim pieces in any color. 
My email renchjames@gmail.  Appreciate your help on this.
Thanks, Jim

[Erick561]

Hello I sold all my plenums. Might have a couple interior a pillar trim panels.
I got your email but haven't taken pix yet

Erik,
I have a 1985 4Runner and I am looking for a late model throttle linkage bell crank set up.  The part that bolts to the intake plenum.  I am not sure the late model will even work on my 4Runner but the early model one I have has so much monkey motion going on that it is sticky and drives me crazy in low speed situations.  I have rebuilt the pedal assembly, new cable, and lubed the bell crank assembly with little lasting improvement.  I think the simpler late model one will be the solution.  Also, I am looking for a couple of the interior A pillar trim pieces in any color. 
My email renchjames@gmail.  Appreciate your help on this.
Thanks, Jim

Still have a solid axle 84 85 front driveshaft for sale and a 3rd gen power steering box hot items everything's going quick.let.me.know what you need thanks

[Erick561]

20R/22R Hybrid (Electronic Fuel Pump Required)
84 22R 43,000 Miles
Solid front axle parts
40° double cardan joint 28.75"
22R Air Cleaner
22R intake manifold
20R Air Cleaner
Center sump 20R 2WD Oil Pan and oil pickup tube
Engine parts
Electrical parts
Body parts
Exterior
Interior
Drivetrain
Prices.set to undercut

[cole.price.813]

Erik, I'm looking for 1st gen 4Runner interior panels. I need the rear cargo area. Have anything??


Sent from my iPhone using Tapatalk

[Erick561]

my business colleague has a 1988 4runner rear bed section we chopped from a blue v6 and it had gray interior.  thats the last 4runner body i have in stock, but i think the interior plastic panels are brittle and have some cracks.  which panels did you need?  there are also the postcard ones that are like long door panels.  his number is 8603261633 if you wanna remind him, he drives by the farm on his way to work but its an hour away from me and so i will also remind him to check out what we have

Erik, I'm looking for 1st gen 4Runner interior panels. I need the rear cargo area. Have anything??

Sent from my iPhone using Tapatalk

2 engine customers this weekend 85-95
still have a 1984 22R 128,000 pulled out of my buddys sfa bobbed single cab, who own's (86yo)Toyota's on facebook
20R/22R Hybrid

let me know what you need, i prefer not to ship over 100 pounds at a time, but have many times

[natedrifts]

hey do you happen to have the upper and lower bracket for a 1979 toyota puckup with an 20r motor in it i need all brackets and bolts

[Erick561]

hey do you happen to have the upper and lower bracket for a 1979 toyota puckup with an 20r motor in it i need all brackets and bolts

yes

[Erick561]

Bump don't hesitate to let me know what you need. As titled, I am an undercutter.  Just sold my 4th engine so far this year buy now before I'm out of stock

[Erick561]

I have more than what is listed so feel free to prompt me with inquiries
www.toyotatruckdismantlation.com

[Erick561]

https://www.ebay.com/usr/erick_86
I have about 10,000 pounds of parts that are not listed and it takes time to make listings so let me know what you need and I'll probably have it on hand or I can Source it in a reasonable time, trying to downsize and help the Offroading community