Author Topic: Knuckel service torque specs for 84 front end (Read 2186 times)

4GuNYoDaHiCal · « **on:** Mar 14, 2005, 07:54:46 AM »

I looked on alldata and could not find any torque specs for an 84 front end. Pulled up a diagram but I don't need that. Checked on marlin search and found nothing. Can somebody help me out?

KYOTA · « **Reply #1 on:** Mar 14, 2005, 08:08:12 AM »

trunion pre-load wheel bearing pre-load what?

guywithuglyyota · « **Reply #2 on:** Mar 15, 2005, 12:18:40 AM »

pre-load knuckle bearings (rotating using a SST) 4.0-8.4lb

Knuckle arm bolts= 62-79ftlbs

bearing pre-load with tensiometer= 4.0-8.4lbs

Spindle mount bolts= 29-39ftlbs

bearing pre-load = 43ftlbs - spin left/right then back off then tighten 35-60INLB inch lbs! (i miss that sometimes)

check pre-load = 6.2- 12.6 lb to turn hub using tensiometer

lock washer/lock nut= 58-72ftlbs

free wheel hub nuts= 21-25ftlbs

Brake caliper bolts= 55-75ftlbs

hope this helps

scheid6996 · « **Reply #3 on:** Mar 15, 2005, 10:54:47 AM »

i hate all data!! we have it in auto tech, give me a toy manual anytime b4 i use all data!

4GuNYoDaHiCal · « **Reply #4 on:** Mar 15, 2005, 06:17:05 PM »

Thanks guy with the ugly yoda.

4GuNYoDaHiCal · « **Reply #5 on:** Mar 15, 2005, 06:18:11 PM »

im all data certified. cookies?

Author Topic: Knuckel service torque specs for 84 front end (Read 2186 times)

4GuNYoDaHiCal

Knuckel service torque specs for 84 front end

KYOTA

Re: Knuckel service torque specs for 84 front end

guywithuglyyota

Re: Knuckel service torque specs for 84 front end

scheid6996

Re: Knuckel service torque specs for 84 front end

4GuNYoDaHiCal [OP]

Re: Knuckel service torque specs for 84 front end

4GuNYoDaHiCal [OP]

Re: Knuckel service torque specs for 84 front end

Related Topics