GREEN WEENIE GONE WILD

[NITE KRAWLERS]

Sheridan Wyoming

Ya wyo is tru!!

[NITE KRAWLERS]

Those skins look great. Do you know Tim Lee?

Thanx man! Tell Tim hi from wee wee!!

Not sure why I haven't bothered to look at your thread before, but I am glad I did now! Looks real good 

You said Sheridan that's not CA is it?

Thanx dude

[NITE KRAWLERS]

So Caleb came over an for wat work we did we got some good stuff done! We got the cross bar link mount installed an a cross bar installed from link mount to link mount! Got the upper links moved at the axle an installed. So the suspension is pretty much done up for the most part! I also got some gussets cut out for behind the cab for the cross bar with grab bar for the peeps in the rear!  It should finish the cut out part of cab nice to . We re bent the cross bar up on the roof but did not get it installed! I didn't like the other one how I had it mounted . I cut some gussets for the lower link mounts also an calebed burned em in along with the mount to the frame!

[NITE KRAWLERS]

Suspension! I still needs to box in an build the upper links to the axle tho!

[NITE KRAWLERS]

I also got a 4x8 of 16 gauge steel an a 2x8  16 gauge for the tub in job! An a 4x6 of 12 gauge for the floor! Next step is the floor an the fuel cell an get the weenie up an moving again! Hope to order fuel cell Monday!

[HogCanyonHopper]

Looking really good man 

[NITE KRAWLERS]

Looking really good man 

Thanx for the complements man! I try!!!

[Nation]

Looks like some serious fun

[NITE KRAWLERS]

Building it is fun but wheel n it again is gonna b way funnerest

[nvtoyin21]

Sweet build man, Keep up the good work!!!

[NITE KRAWLERS]

Sweet build man, Keep up the good work!!!

Hey Thanx !

[88_YotaCrawler_88]

I just read this whole thread with my mouth open from beginning to end , Ill be checking in on the 3 Link

[NITE KRAWLERS]

I just read this whole thread with my mouth open from beginning to end , Ill be checking in on the 3 Link

OK sounds good! I might do four link tho if I can! Have to see when I get to that point if I have room ! Think n bout a motor swap so that will change a few things to!

[NITE KRAWLERS]

Did a little mock up of the upper link box in! Hope to build the real parts tomo night

[pumkin toy]

lookin good dude!  I like the gusset on the cage and the axle link braces

[NITE KRAWLERS]

Hey Thanx brah!! Ya after like 12 different designed axle trusses I got one that's gonna work an look good!  I think I'm gonna make the gussets on the cage a bit bigger tho!  Long story why!!!!!

[NITE KRAWLERS]

Got the upper link parts built an welded up!  But between my welder acting up an my helmet needing a new front window so i can see i got it! Few other little things to but not much! Found a 12 gallon fuel cell from summit, so gonna get that ordered up!

[NITE KRAWLERS]

Heres the fuel cell! Match the shocks [smiley=thumbsup.gif]

[88_YotaCrawler_88]

Looking good!

[pumkin toy]

sweet dude, its coming along! floors next?

[NITE KRAWLERS]

Looking good!

Thanx  man!

[NITE KRAWLERS]

Ya the floor is next! I prob would of got the floor cut out but my Saturday was messed up! Fuel cell is ordered an hope to see it this coming weekend! oh its not gonna be red just normal ALU cause the red is out of order an would not b here till middle of August so bag that idea!  I might go out an work on the cross bar for cut out part or cab here in a bit cause I cut new bigger gussets yesterday. The other ones would not work cause they were to small cause the cab is so out of wack an bend if I would of run the tube from side to side an follow body line it fits on the other gusset barley an it would of been super noticeable an of I don't follow body lines it will look so not level cause the frame is actually bent. I got it skimmed so it looks level so I have to build few things from side to side a bit different. So wat I'm getting at is with the bigger gussets u won't notice it at all    long story I told ya!

[NITE KRAWLERS]

Well I got all amped up an got the floor cut out an started anyway! It needs a few more bends an stuff an should fit nice! 
Here it is all ready for plazma time!

Bam!!!







I might be able to have seat mounted this coming week an the fuel cell!!

[pumkin toy]

yeah dude you better get it mounted this week!, only like 2 1/2 weeks till Riggins run!

[NITE KRAWLERS]

I know right! Cell should b here Thurs !! I might race DH this weekend. See how things go........

[cen-cal crawler]

Wow sweet build! Subscribed!

Sent from my GT-P5113 using Tapatalk 2

[nvtoyin21]

Im freakin ready to start on my 82 after checkin this bad boy out!

[NITE KRAWLERS]

 

[NITE KRAWLERS]

Finished up the floor an I like how it turned out! The fuel cell showed up  Thurs also. Now I need to figure out how to make old fuel pump work with the cell or do a inline fuel pump!!??? Not sure wat I should do or wat people do when they run a fuel cell?? So any help would be great!!!!

[NITE KRAWLERS]

So I got the fuel cell done! I just took the sending unit out an drilled a 3" hole for my stock pump! Had to bend the bracket a bit to make it work. I also busted the old spacer off old tank an used it for my adapter to make it work on fuel cell! I won't have a sending unit but I got a flash light an my own 2 eyes to check it might add one later if I get real board!! It should work out pretty good! Also got the new cross tube in on the main halo in the rear I redid.





This cross tube looks better than the first one I decided I did not like.