Author Topic: 2012 - $1,000 Holiday Wish List Give-A-Way! [FINISHED!] (Read 91090 times)

chris514scott · « **Reply #330 on:** Dec 12, 2012, 05:41:03 PM »

Dear Marlin,

For Christmas I would like 2 sets of 5.29 gears for a 8" 4 cyl toyota truck, a yukon spool, and an ARB RD132 air locker.

Merry Christmas,
Chris

http://www.marlincrawler.com/wishlist/701

BigMike · « **Reply #331 on:** Dec 12, 2012, 05:51:16 PM »

Nice Wish Lists so far guys! Keep em coming!!

lgerman1555 · « **Reply #332 on:** Dec 12, 2012, 07:12:27 PM »

merry christmas across the western seaboard,
I have an '88 singlecab thats my daily driver/wheeler, the combo has its ups and downs. The motor is built but the rest needs some work, sheared three rear pinions in a month and yeah i was goin slow ha ha. I just got all the parts together for the 63" chev spring swap so now i need some gears hence the wish list. i got a twin stick setup on there cz i want my rig to crawl like a tractor but look like one too. The hoodie is a good one mostly because the logo but i like playin in the snow too. My steering is pretty banged up so why not go high steer and keep the new parts new. The last thing on the list is dual case adapter, as is my truck goes way too fast in 4 Low 1st and i want some bigger rubbers so thats what I'm wishin for, plus i got a spare tranny and t-case in the garage.

http://www.marlincrawler.com/wishlist/703

BigMike · « **Reply #333 on:** Dec 12, 2012, 07:32:57 PM »

Dual Case Adapter > Other parts on any list

Sent via Tapatalk + Jailbroken iPhone4

byrddog · « **Reply #334 on:** Dec 12, 2012, 07:42:43 PM »

http://www.marlincrawler.com/wishlist/699
I wish for a dual case kit, spartan 8" 4 cyl locker, u-bolt flip kit for the front and rear,upper axle reinforcement gusset,and a polyurethane body mount kit .Thanks for the chance!

MC387 · « **Reply #335 on:** Dec 12, 2012, 08:05:45 PM »

Been a Marlin customer since 2000, Hope I win.
My wish list.
I would love to upgrade to the New 23 spline mc07-xd, and the 25mm steering kit with arms, plus I would like a new Marlink Tierod and draglink, because mine is getting rusty in the threads, I figured while I have my Tcase out to change the doubler, I would need to upgrade my outputs with the 30 spline chromoly front and rear. And while I am at it I would replace the shift fork in my R-150 with a billet one to firm up my 1-2 shift. This would also be a great time to ad a Chromoly thrust washer and a Heavy duty transmission output seal. My ARB mini compressor could also use an upgrade to the large ARB compressor on your site. Thanks for all the awesome products throughout the years. And thanks for installing my MC05 back in the day. Merry Christmas.
http://www.marlincrawler.com/wishlist/704

Remove   Products      Wanted   Have   Qty.   Purchase   Total

   25mm Steering Upgrade Kit w/ Arms $0.00

   Dual Case Kit (MC07-XD) $429.00

   Marlink for Hilux/4Runner $121.99

   Marlink for Hilux/4Runner $124.99

   Billet Shift Fork, R-series $129.00

   30-Spline Chromoly Front Output Shaft $0.00

   ARB Air Compressor$263.39

   Chromoly R-series Thrust Washer Kit $79.00

   Heavy Duty Transmission Output Seal $9.74

ValenciaTundra · « **Reply #336 on:** Dec 12, 2012, 08:54:24 PM »

Changed my wishlist around a tad. Screw the dream of a white Christmas.... I want a Marlin Christmas!!!

Chromoly 30-Spline axle kit
Chromoly UM07 Marfield, 27-spline
HD front inner axle seals x2
Steering Arm Service Tool
90-degree ARB Solenoid Exhaust Fitting x2
Air Line Splice, Threaded x2
12mm Knuckle Stud Nut x16
12mm Knuckle Stud Wavey Washer x8
12mm Knuckle Stud Flat Washer x8
Hoodie x2

http://www.marlincrawler.com/wishlist/349

Tyler+Ashleys4runner · « **Reply #337 on:** Dec 12, 2012, 10:41:34 PM »

Thanks for the chance

The items off my wish list that i need are

1. Front bumper for 1990 4runner with short stinger 2. Heavy duty clutch kit v6 3. Clutch slave cylinder 4. 2- elocker motor guards in red 5. 2- front wheel bearing kits 6. Front axle top brace 7. Tie rod end left 8. Tie rod end right 9. Large hoodie 10. V6 3.0 manifold badge 11. Marlin crawler 3" round sticker

Total $999.51

Link to my wishlist http://www.marlincrawler.com/wishlist/469

Toyotadon · « **Reply #338 on:** Dec 12, 2012, 10:44:17 PM »

Added a few things/options to my list:

2 Electric Locker Motor Guards
1 Marlink for FJ80
1 Crossover Steering Stabilizer

http://www.marlincrawler.com/wishlist/565

99nmtaco · « **Reply #339 on:** Dec 12, 2012, 11:35:14 PM »

Thanks for the chance to win some quality offroad products BigMike and Marlin Crawler!! For Christmas this year my taco would like:
Zip Locker 8" V6
Arb Air Compressor, Compact
http://www.marlincrawler.com/wishlist/383
It would make my taco's christmas very merry!

baldwookie · « **Reply #340 on:** Dec 13, 2012, 10:01:38 AM »

http://WWW.marlincrawler.com/wishlist/681

cross my fingers

kelarader · « **Reply #341 on:** Dec 13, 2012, 10:11:11 AM »

PLEASE PLEASE PLEASE PLEASE, pleaaaaase!

http://www.marlincrawler.com/wishlist/708

Tyler+Ashleys4runner · « **Reply #342 on:** Dec 13, 2012, 10:24:01 AM »

Thanks for the chance

The items off my wish list that i need are

1. Front bumper for 1990 4runner with short stinger 2. Heavy duty clutch kit v6 3. Clutch slave cylinder 4. 2- elocker motor guards in red 5. 2- front wheel bearing kits 6. Front axle top brace 7. Tie rod end left 8. Tie rod end right 9. Large hoodie 10. V6 3.0 manifold badge 11. Marlin crawler 3" round sticker

Total $999.51

Link to my wishlist http://www.marlincrawler.com/wishlist/469

shot1 · « **Reply #343 on:** Dec 13, 2012, 11:01:18 AM »

It would be great to be able to get my truck moving again. Thank for the opportunity.

http://www.marlincrawler.com/wishlist/580

Front Axle Service Kit - 1 @ $179.00
Knuckle Alignment Tool - 1 @ $227.48
Rear Axle Service Kit, 1979-99 - 2 @ $138.00
Heavy Duty Knuckle Gusset Kit - 1 @ $79.00
Full Face Differential Armor - 1 @ $59.00
Spindle Nut Kit - 2 @ $17.58
Backing Plate Eliminator - 1 @ $17.00
Steering Arm Service Tool - 1 @ $173.81
Polyurethane Body Mount Kit - 1 @ $69.00
Snap Ring Pliers - 1 @ $24.99

Thanks Again.

Wainiha · « **Reply #344 on:** Dec 13, 2012, 11:37:06 AM »

I hope all you new people know that this offer is only open to veteran members...

twistedtoy92 · « **Reply #345 on:** Dec 13, 2012, 12:35:40 PM »

Billet dual case adapter
25mm Steering arm kit
long frame bushings
Tcase turtle shift knob

Total: $997.98

http://www.marlincrawler.com/wishlist/709

Marlin rocks! $Beer Chug\'n$

OLDYELR · « **Reply #346 on:** Dec 13, 2012, 01:15:02 PM »

What a sweet deal! It would be awesome to rebuild my front axle and make it tougher!

My wish list: http://www.marlincrawler.com/wishlist/710

Chromoly 30-Spline Axle Kit $549.00

Front Axle Service Kit $179.00

Knuckle Alignment Tool $227.48

Backing Plate Eliminator $17.00

Low Profile Magnetic Drain Plug (Metal Gasket) $4.99

18mm Tap, Drain or Fill Plug $14.99

Go Marlin!!!

Cyberman · « **Reply #347 on:** Dec 13, 2012, 02:10:36 PM »

http://www.marlincrawler.com/wishlist/467

Chromoly 30 spline front axles
Knuckle service kit
54mm hub socket
Knuckle alignment tool.
2- Bilstein 5125 (12" )
Hoodie

Hoping for a white Marlin Christmas...

Sent from my DROID RAZR using Tapatalk 2

reformed · « **Reply #348 on:** Dec 13, 2012, 05:32:07 PM »

Thanks Guys!
http://www.marlincrawler.com/wishlist/711

Dchoerunner · « **Reply #349 on:** Dec 13, 2012, 06:12:21 PM »

http://www.marlincrawler.com/wishlist/712

W56 rebuild kit
4.88:1 gears 4cyl
4cyl differential setup
Standard vented rotors
Total $959.28

Fingers crossed

1985_4runner · « **Reply #350 on:** Dec 13, 2012, 08:35:53 PM »

Dear Marlin, I would like full face diff armor, An interior roll cage kit, a crossmember mount, and a 4.70:1 competition chromoly gear set 21 spline all for my 1985 Toyota 4runner. If i could get all this it would be really swell. Merry Christmas.
http://www.marlincrawler.com/wishlist/713

ned72 · « **Reply #351 on:** Dec 13, 2012, 09:16:14 PM »

Finally like all my friends I now have a toyota and of course have the bug to build it
1. Zip locker 8" 4cyl 768.39
2. Power tank pro series tire repair kit 39.95
3. Big bore V6 hilux brake master cylinder 89.00
4. Bumpstop (large) 59.00
5. Bumpstop extensions 12.00
TOTAL: 968.34

http://marlincrawler.com/wishlist/715

Tyler+Ashleys4runner · « **Reply #352 on:** Dec 13, 2012, 09:45:39 PM »

Thanks for the chance

The items off my wish list that i need are

1. Front bumper for 1990 4runner with short stinger
2. Heavy duty clutch kit v6
3. Clutch slave cylinder
4. 2- elocker motor guards in red
5. 2- front wheel bearing kits
6. Front axle top brace
7. Tie rod end left
8. Tie rod end right
9. Large hoodie
10. V6 3.0 manifold badge
11. Marlin crawler 3" round sticker

Total $999.51

Link to my wishlist http://www.marlincrawler.com/wishlist/469

4funrunner · « **Reply #353 on:** Dec 13, 2012, 10:37:57 PM »

thanks for the chance, hope I'm lucky. Here's my list

Heavy Duty IFS Steering Box Mount Kit $55.00

Heavy Duty Knuckle Gusset Kit $0.00

Chromoly 30-Spline Axle Kit $549.00

25mm Steering Pin Upgrade, Kit $0.00

ARB Air Compressor $263.39

Super Heavy Duty Clutch Kit (1,600 lb) $227.05

http://www.marlincrawler.com/wishlist/717

dweinberg01 · « **Reply #354 on:** Dec 13, 2012, 11:30:51 PM »

http://www.marlincrawler.com/wishlist/716

   High Steer Kit for Hilux

   $0.00

   Front Axle Service Kit

   $179.00

   Rear Axle Service Kit, 1979-99

   $69.00

   Dual Case Kit (MC07-XD)

   $429.00

   Rock Slider

   $0.00

montanacb · « **Reply #355 on:** Dec 14, 2012, 12:04:11 AM »

Thank you for the opportunity to get some great items for Christmas
http://www.marlincrawler.com/wishlist/416

Goldrush · « **Reply #356 on:** Dec 14, 2012, 08:09:10 AM »

woohoo! Keep em coming guys! This is awesome!

coryc85 · « **Reply #357 on:** Dec 14, 2012, 10:45:11 AM »

My wishlist is here: http://www.marlincrawler.com/wishlist/718

I have only 3 items:

A lovingly rebuilt W56-B transmission, a Marlin 4.7 geared transfer case, and one of Marlin's Heavy Duty Clutch Kits.

Thank You!

Merry Christmas to the whole Marlin Family!

rayjayx78 · « **Reply #358 on:** Dec 14, 2012, 01:03:25 PM »

What a great opportunity! Thanks Marlin!!

- Heavy Duty Knuckle Gusset Kit
- ARB Air Compressor
- Gasket and Seal Rebuild Kit
- Brake Caliper and Rotor Combo
- Heavy Duty Long Travel Front Drive Shaft
- Polyurethane Body Mount Kit

http://www.marlincrawler.com/user/10562/wishlist

bryanrz · « **Reply #359 on:** Dec 14, 2012, 05:45:14 PM »

My wish list unique link http://www.marlincrawler.com/wishlist/30

   1 Heavy Duty Clutch Kit (1,200 lb) 208.05
   1 Flywheel, I4 2.4-liter (8-7/ 8) 99.00
   1 ARB Air Compressor 263.39
   1 Full Face Differential Armor 59.00
   1 Hoodie XL 29.00
   1 Speedometer Extension Cable 39.00

Total; 697.44

All I need to finish my Dual cases since I just received my

adapter yesterday

BigMike [OP]

BigMike [OP]

Related Topics