hey guys, well i am at a stand still right now. i have a 1983 toyota pickup, and i am running a 2.7 tacoma motor, just finished the swap a few months ago. so here the problem under a load, like in reverse or pulling out in first i get alot of bounce from the motor moving up and down. also when i hit soft sand or snow also moves alot. first thought was broken motor mount, well i pulled them out tonight and not even stress cracks in them i can notice. reinstalled and did brake torque on teh motor in reverse and the pass side of the motor pulls up and stretchs the mount a good bit. im stumped. i am running chilkats motor mount conversion plates. and i also just installed trail-gear tcase poly mount to help limit flex but didnt work. so i didnt have to run full poly motor mounts i had them in my 22r and im not going back there so terrible. even with this tcase im prob pullin that thing out tom, any help thanks
