6th Annual Christmas Card Exchange

Started by JanMarie13, October 11, 2010, 09:21:08 AM

0 Members and 1 Guest are viewing this topic.

JanMarie13

6th Annual
Marlin Crawler Forum
Member Christmas Card Exchange



That's right folks!  Only 74 more days until Christmas!

By now most of you know the drill, but for any newcomers...every year around this time we start to compile a list of all forum members who would like to exchange Christmas Cards with each other.  If you'd like your name on the list, just PM me by December 1 with the following information:

1.  Your forum name (which I guess I can just get from your PM)    :turtle3:
2.  Your REAL name (it helps the post office, who may not know who 'ToyMan69' is)   :gap:
3.  The complete mailing address where you want to receive your Christmas Cards

I will be compiling the list, and then shortly after December 1, I will PM the complete list to all who are participating.  It's that easy!

If Christmas isn't something you're "into" then just don't respond.  Only people who PM me with the information above will be added to the list.

***Please do not post your personal information in this thread.  Just PM it to me.***


RIP Kyle, we love and miss you man.  :smooch:
Quote from: KYOTA on October 03, 2009, 10:33:31 AM
thanks for the smooch I miss you too !  :yesnod:

Rocksurfer

The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

*FFC*

I flaked last year - even though I was lucky enough to receive everyone else's cards :love: This year I'll spare ya'll a stamp because I foresee me being a bit busy :gap:
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

79coyotefrg

Quote from: *FFC* on October 12, 2010, 07:21:01 AM
I flaked last year - even though I was lucky enough to receive everyone else's cards :love: This year I'll spare ya'll a stamp because I foresee me being a bit busy :gap:
:headscratch:  so does that mean your OUT???


I'm in!!  hopefully I get things done before the 23rd :_oops:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

*FFC*

Quote from: 79coyotefrg on October 12, 2010, 08:34:00 AM
:headscratch:  so does that mean your OUT???


I'm in!!  hopefully I get things done before the 23rd :_oops:

Yessss... I'm out for this year :down:
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

JanMarie13

Quote from: *FFC* on October 12, 2010, 08:59:02 AM
Yessss... I'm out for this year :down:

I'd have to say that's completely understandable, considering the um..  package...  that Justina is expecting the arrival of in the imminent future!     :cheese:


RIP Kyle, we love and miss you man.  :smooch:
Quote from: KYOTA on October 03, 2009, 10:33:31 AM
thanks for the smooch I miss you too !  :yesnod:

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Rocksurfer

The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

BLACKDOG

:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

Cheesemaker

Miss ya Dean (4THEWKN) & Kyle (KYOTA)!!

4THEWKN~9/17/2006  If it wasn't for you, I'd be driving something other than a Toyota!

My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0
Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen

Rocksurfer

I have to remember to send you my new address....
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

JanMarie13

Hear ye!  Hear ye!   Coming up on the last call for Christmas card addresses!

Participating so far: Mudmaster, FFC & MiniFFC, Blackdog & Charlieknownothing, Cheesemaker, 83yota, PA_taco_13 & MPA.

If your name isn't on that list--I don't have your address yet!  (This means you Rocksurfer & Glen!)   I don't want to take off of old lists in case things have changed.  So if you want in on the Christmas card list, be sure to PM me your address by Wednesday!
RIP Kyle, we love and miss you man.  :smooch:
Quote from: KYOTA on October 03, 2009, 10:33:31 AM
thanks for the smooch I miss you too !  :yesnod:

Dr.Maxwe001

#12
im in here is my information


Jeff Maxwell
XXXXXXXX
XXXXXXXX

 :turtle: :turtle: :turtle:



edited by MPA to protect the identify of Jeff's wife  :yupyup:
IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo

Rocksurfer

The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

unclejpl4x4

NOT in this yr :boobs:  so U don't have to send me a card :)
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

JanMarie13

Bah Humbug, Joeyson!!    :yupyup:


The complete and final participant list was just PM'd to all who responded.  Happy cheer spreading to all!  :cheese:
RIP Kyle, we love and miss you man.  :smooch:
Quote from: KYOTA on October 03, 2009, 10:33:31 AM
thanks for the smooch I miss you too !  :yesnod:

mudmaster

Time to go wheelin!

unclejpl4x4

Got a card from jeff M  :smooch:       hay jan i think this thread should of been a sticky
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

79coyotefrg

#18
so far Ive got cards from

Jeff and Brandy
Jan and Brian
Marlin and Christine
Cheesemaker
mudmaster

I sent a "Merry 25th of December" card to Cteng (he doesnt celebrate Christmas) but the card was returned "undeliverable as addressed"   :down:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Toymin8r

I got one from Jan and Brian :woohoo:


Thanks MPA  :smooch:
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T MOVE
AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE DUCT TAPE.

IF YOU CAN'T FIX IT WITH A HAMMER, YOU HAVE AN ELECTRICAL PROBLEM.


QuoteBeccaLoo24 – i can toss grown men.... so dont doubt me

IronClad

Annihilation  Fabrication
Do you need a Hammer?
My build thingy... http://board.marlincrawler.com/index.php?topic=39885.0
(╯°□°)╯︵ ┻━┻
Word hard, Keep your head in the game and if anyone gets in your way tell them you don't give a damn !

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

                                          
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Toymin8r

Got a christmas card from Glen the other day.    Thanks pal.   :clap:
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T MOVE
AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE DUCT TAPE.

IF YOU CAN'T FIX IT WITH A HAMMER, YOU HAVE AN ELECTRICAL PROBLEM.


QuoteBeccaLoo24 – i can toss grown men.... so dont doubt me

Cheesemaker

I got two cards one from Glen and I can't remember who, that had pictures of their rigs in the cards.  It made me laugh, cause I wanted to make my own cards again like last year.  But ran out of time!!




:headscratch:  Is this the first year that MarlinCrawler didn't put out cards?
Miss ya Dean (4THEWKN) & Kyle (KYOTA)!!

4THEWKN~9/17/2006  If it wasn't for you, I'd be driving something other than a Toyota!

My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0
Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen

79coyotefrg

Quote from: Cheesemaker on December 26, 2010, 06:24:52 AM
I got two cards one from Glen and I can't remember who, that had pictures of their rigs in the cards.  It made me laugh, cause I wanted to make my own cards again like last year.  But ran out of time!!

yea I wanted to make a card out of my truck picture but didnt have the brain power or money to get it done

Quote
:headscratch:  Is this the first year that MarlinCrawler didn't put out cards?
if you bought parts and didnt get one i'd say yes :(

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

JanMarie13

Quote from: Cheesemaker on December 26, 2010, 06:24:52 AM
:headscratch:  Is this the first year that MarlinCrawler didn't put out cards?

Nah, I actually think I remember hearing something over the past few years.... something along the lines of that their customer base has become so big that they started having to (I assume randomly) pick just a set number of customers who would get a Christmas card, since Marlin likes to personally sign each one.  I know we've bought at least one thing a year and haven't gotten a card for at least 3 years now.
RIP Kyle, we love and miss you man.  :smooch:
Quote from: KYOTA on October 03, 2009, 10:33:31 AM
thanks for the smooch I miss you too !  :yesnod: