project blood,sweat, and beers

[Dingman.]

Well when u do hit me up.

[OldGold3VZE]

How did the u-bolts with the D-ring style swing mount hold up on the old toy axles?  I've never seen that done before.

[P-DiseToy24]

they worked reallly good untill you roll doin 30.. haha they tend to break/bend when that happens. other than that they worked tits

[P-DiseToy24]

[Thomas P]

Boss!! 

[P-DiseToy24]

Guess I should throw up some some specs..
60/70 welded f/r For now 6.17s
New 4.7 23 spline dual from tg yes its tg i got a screamin deal from jay at yota masters on a new case set up and steering. If your in so cal anywhere close to corona ca hit them up great guys who know there Toyota stuff.
Custom built Deavers 2.5 piggy back kings rear
home brewed but dialed pack in front with 2.5 king rs. front
24 to the frame
9.5xp hydro assist
fiber f/r
exo/inner cage asap

[P-DiseToy24]

Tore out the old toy crossmemeber

[P-DiseToy24]

cut the stock frame back to the motor mounts,

[P-DiseToy24]

I had some scrap metal laying around so i end up using as much as possible to save me some coin.

[P-DiseToy24]

Burned it all in and threw some plate at it... the inside is also plated to the inner frame rail as well

[P-DiseToy24]

Rear end I used a couple of 1 5/8 130 wall tube for the back of the frame. I still need to gussest and plate the outside of the frame about 6 inches past the cut line

[P-DiseToy24]

Built some shakles to for the rear the other day too.. im planning on using ballistics 2.63 bushing ends for where the shackle will be bolting to so I can adjust ride height and dial in the rear as best as possible

[P-DiseToy24]

the front end is getting there got pretty much all of the main parts finished and burned in

[P-DiseToy24]

[P-DiseToy24]

I finally figured out what im going to do with the flange on the 70 and threw a triple drilled on the lathe last week to mill it down..
plan is to mill down the stock flange as flat as possible and tig on the moded triple drilled.. lol a little ghetto but it sounds good in my head haha

[superyota]

nice progress! welds look great.

[P-DiseToy24]

thanks alot man I appriciate that. Its taken alot of trashy welds to get where im at now and im still LOW on the welding totum poll...

[P-DiseToy24]

Pulled apart the front end a few nights ago...
pretty stoked to start puttin parts on this thing.
6.17s
ballistic HS.
throw some more weld at the slight shave it has
toy flange
welded till i can afford an arb
cut off the dually flange
build diff cover
mount hydo ram
new u joint
new calps pads yadda yadda

[P-DiseToy24]

Got a plate made for the rear... Im thinkin of putting a couple holes with a whole saw to weld in

[P-DiseToy24]

oh yeah and I finally made a decision and built a pick.
welded on some W plates on the front
Winch and my lucky fairlead are in too

[*** YELLER ***]

could you post random pictures of yer welds so I can stare at them there so clean, nice werk

[P-DiseToy24]

Wow!!! that makes me feel pretty good man that really means alot. You have no idea how many hours its been behind the mask and to here that makes it all worth it.
Ill get some up soon!

[P-DiseToy24]

I still have a long long way to go but heres one my buddy took of some rear lowers for a watts link on a rat rod im tryin to build him on the side. I ended up only welding the sides so he can at least use it for mock up.

[*** YELLER ***]

TRUCK PORN    

lets see a build thread on that rat rod

[P-DiseToy24]

lmao
ill see if I cant get a few pictures next time im out there workin on it.

[*** YELLER ***]

sweet 

[Zs Confederate Toy]

TRUCK PORN    

lets see a build thread on that rat rod

X2

[83 Crawler]

how did i miss this build

[86bobbedtoy]

whats new on this?

[Dingman.]

Kasey. Where's the updates Dood?