Topic: Have anyone use trail tough rear disc brake kit?

[Jaysen]

I was wondering if anyone had use trail tough rear disc brake kit. It say you can use soild front caliper but I want to know if you also do need spacer.

[79coyotefrg]

got a link

[Cheesemaker]

http://www.trailtough.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=232&category_id=51&option=com_virtuemart&Itemid=53

[Jaysen [OP]]

Please let me in on more infor.

[Cheesemaker]

I know alot of people use Sky's kit since it is just one bracket.  But you have to use modified rotors and calipers. 
But the Trail-Tough, I haven't heard of anybody using it, says it used stock calipers and rotors, so off the shelf parts will go right on.  I'm not sure of All-Pro's parts.
http://www.allprooffroad.com/pickupbrakeupgrades/255
http://www.sky-manufacturing.com/new/detaproduct.php?id=128

But if you go this route, you will need to go to one of these!
http://www.sky-manufacturing.com/new/detaproduct.php?id=142
http://www.allprooffroad.com/pickupbrakeupgrades/33


But you will also need to put in residual valves in the brake lines, and best to upgrade to a 1" master cylinder, and a dual diaphragm booster.

[OOPS]

I bought my rear disc brake set-up from Dave'z Off Road Performance in Diamond Springs,CA. The thing I like about it is it uses Toyota IFS calipers and Chevy rotors. It is a complete kit.

http://www.davezoffroadperformance.com/forum/viewtopic.php?f=3&t=52&st=0&sk=t&sd=a

I also bought a brake proportion valve set up which comes with the residul valve.

[boggerunner]

i sell a kit too, look in my sig
and that looks like an expensive knock off of my kit.

[Jaysen [OP]]

Thank you guy for the help. I'm going think about it. Cause I also want to get all pro x-member also for the e-brake

[Wermz84]

I bought my rear disc brake set-up from Dave'z Off Road Performance in Diamond Springs,CA. The thing I like about it is it uses Toyota IFS calipers and Chevy rotors. It is a complete kit.

http://www.davezoffroadperformance.com/forum/viewtopic.php?f=3&t=52&st=0&sk=t&sd=a

I also bought a brake proportion valve set up which comes with the residul valve.

hey Oops,

Did you use a 2lb or a 10lb residual valve?

what master and booster do you have with your kit?