Author Topic: Products I'd buy again (Read 4214 times)

TacoRunner · « **on:** Nov 30, 2009, 09:23:52 PM »

Ok as some of you know I've been blessed with some good fortune and write for 4WDTO Mag. Of the products I've gotten from the Mag or purchased since then. Here is a list of product that I'd buy or ask to test again.

Diamond Axles (its the Marlin Crawler of Axles)
Marlin crawler anything. Trannies or T-cases. Even when they mess up, they go out of their way to make it right.
LC Engineering Cam
Can-Back SoftTop
Longfields, they dont get any tougher. Go America
4x4 Labs Steering arms

TacoRunner · « **Reply #1 on:** Nov 30, 2009, 09:28:57 PM »

Product I wouldn't test again.

Thorley Headers for a 3RZ. They make good stuff, just not for the 3RZ. Evil Government and those pesky smog req's.
ORS Suspension. Mike and the guys at that shop are/were freaking wonderfull. VERY VERY Good people. But the kit was lacking a bit from a design standpoint. Very much status quo.
Bumpers and rocker guards. No one makes good ones. (In my opinion) I want tougher stuff.

bigarms23 · « **Reply #2 on:** Nov 30, 2009, 11:24:30 PM »

to buy again

bfg tires
full width sky kit
detroit lockers
warn winch
dual cases either marlin or inchworm i have a case by both
driveline tech shafts

wouldn't
mickey thompsons mtz sucks in low snow and ice
bushwacker fender flars i keep ripping them off
2inch body lift
my used allpro front bumper i keep bending it

axled89 · « **Reply #3 on:** Dec 01, 2009, 12:12:50 AM »

a second gen x/cab toyota and 3rd gen standard cab toyota.

87pickup · « **Reply #4 on:** Dec 01, 2009, 08:07:56 AM »

Id buy again

Diamond axles ( works of art in my opinion)
Anything Marlin
Red Label Bfg krawlers
Longfield anything
Mastercraft seats
Can Back softtop ( cant beat tig welded stainless frame and super durable canvas, looks great too)
High Angle Drivelines
Psc ram assist
ors 3rz conversion harness

I wouldnt buy
Trail-Sliders (Bought them for my dads runner and they are junk, Chinese dom dents super easy)
4x4 innovation quick release door hinges
Any synthetic winch rope smaller than 3/8

junya92toy · « **Reply #5 on:** Dec 01, 2009, 12:38:05 PM »

Why wouldnt you get synthetic line under 3/8s?

46&2 · « **Reply #6 on:** Dec 01, 2009, 12:52:30 PM »

Since most everything on my truck is either a junkyard part, or Marlin, I don't have a whole lot to offer besides this...

Any Marlin product
Anything 4x4 Labs (all I currently have is Luke's HD front spring hanger and shackles and other misc stuff)
Warn winches
BFG Mud terrains (old style)
Goodyear MTR (old style)
Rock crawler rims
Bilstien shocks
Hi Lift jacks
The ORIGINAL Optima red top, mine is almost 10 years old and still working great. I hear they dont make em like they used to though now

I've since gone to the Marlin HD clutch in my 4runner, but I ran a Centerforce dual friction in my 4runner and the low end model Centerforce in my gf's 93 and if not for the price, I would buy Centerforce again.

88_Pathy · « **Reply #7 on:** Dec 01, 2009, 01:53:50 PM »

Marlin UM-06
GY MTRs
Alpine deck (been through hell and back)
Hella H4 lights
Bilsteins
Marlin Springs
Orbital Battery (deep Cycle)
Tuffy tool box
http://www.4wheelparts.com/prodDetail.aspx?partNo=S/BMV50&jeep-parts=true (I got mine at Costco) works awesome for what it is.

Rocksurfer · « **Reply #8 on:** Dec 01, 2009, 08:28:35 PM »

If it fits and it works I don't plan on buying it again, that would be redundant.

Pat · « **Reply #9 on:** Dec 01, 2009, 08:55:05 PM »

I would buy again

www.12voltguy.com stuff.. Best there is
Longfield
ARB
Marlin Crawler
Goodyear

Scuba · « **Reply #10 on:** Dec 02, 2009, 12:48:13 AM »

4XInnovations Sliders
Marlin Shift seat and socket
KM1's (if they still made em

)

Another Tacoma if I had the money !

yotarunner85 · « **Reply #11 on:** Dec 02, 2009, 01:05:42 AM »

BFGs tires
Detroit lockers
Optima battery
Marlin products

axled89 · « **Reply #12 on:** Dec 02, 2009, 01:11:47 AM »

warn
swappers
boggers
longs
hub gears
sas.

TacoRunner · « **Reply #13 on:** Dec 02, 2009, 03:58:38 PM »

Quote from: jerry92toy on Dec 01, 2009, 12:38:05 PM

Why wouldnt you get synthetic line under 3/8s?

Because, when you are seriously stuck you need it. 5/16" is to small. Thats what Viking off-road recommends.

Quote from: Rocksurfer on Dec 01, 2009, 08:28:35 PM

If it fits and it works I don't plan on buying it again, that would be redundant.

for me, its been the IF IT WORKS.

NorCalToy · « **Reply #14 on:** Dec 02, 2009, 05:04:38 PM »

A Toyota

BFGoodrich Tires (specifically the KM's)
High Lift Jack

87pickup · « **Reply #15 on:** Dec 03, 2009, 07:06:18 AM »

Quote from: jerry92toy on Dec 01, 2009, 12:38:05 PM

Why wouldnt you get synthetic line under 3/8s?

If it gets just the slightest fray in the line it will snap. I used my 5/16 twice and it later snapped winching it on the trailer, then i tied a know aroun the hook and used it to winch off a obstacle and it snapped at the knot. I just think 3/8 and bigger is far more durable.

junya92toy · « **Reply #16 on:** Dec 03, 2009, 07:44:10 AM »

I beat the crap out of my non synthetic line. I guess I will just stick to that.

87pickup · « **Reply #17 on:** Dec 03, 2009, 08:03:56 AM »

I dont trust steel line, i will carry a pare synthetic before i risk steel line breaking.

junya92toy · « **Reply #18 on:** Dec 03, 2009, 08:07:12 AM »

9 years, and never broke once.

TacoRunner · « **Reply #19 on:** Dec 03, 2009, 09:35:38 PM »

All winch lines should be inspected after each trip out, provided they were used. Steel is by far more durable than the synthetic, but steel stretches and then you better be really quick on your feet. Synthetic has a certain saftey factor or feeling of safety at least. Perhaps someone will come out with a Chromoly cable.

(I dont care who you are that some funny S*#T right there)

kneedownnate · « **Reply #20 on:** Dec 03, 2009, 09:39:29 PM »

Quote from: 87pickup on Dec 03, 2009, 08:03:56 AM

I dont trust steel line, i will carry a pare synthetic before i risk steel line breaking.

All you ever have to do is throw a jacket or something over the center of the cable. If it breaks on either end, the weight will pull it toward the center. Don't stand by the middle of the cable and you'll be fine

Steve_925 · « **Reply #21 on:** Dec 05, 2009, 07:39:25 PM »

go with again:
~ballistic anything(they suck with shipping it out tho)
~bobby long
~detroit locker for sure
~hunsaker seats(i've never had them but ridin in them for long periods of time and loved em)
~iroks
~crow 3" padded harnes

will never buy or recomend again:
~round eye L.E.D.
~cyberdyne gauges. they are crap

WHITE_TRASH · « **Reply #22 on:** Dec 06, 2009, 10:37:40 AM »

Speedway stainless brakelines and adapters, their CroMo heims are very durable too. Hell I have yet to buy anything from them I wasn't happy with. Same with Marlin, good products from a great company.

As far as cable vs rope that's a no brainer, I'll take my 3/8" viking line from winchline.com any day. Light and easy to drag if you need it and it is safe, no stored up energy to whip when it snaps. You can put all the coats you want over cable and it will still whip if it breaks on one end.

What I won't buy again... Some of the stuff I have bought from datinfab was drop shipped from TG so I gave it away rather than using it..

TacoRunner [OP]

TacoRunner [OP]

TacoRunner [OP]

Related Topics