Audio for an X-cab

[Jud]

How do you fit the 4" in the dash?

That is what comes stock.

[jrock]

Oh, shoot. Okay.

[thegoofster21]

i have the same amp as you. they kick a$$

[Tallchevy]

Mount the 6.5" in the doors & wire them to the amp. Wire the 4" to the deck & now you have 6 speakers running. If you take the doors off you still have sound up front.

[jrock]

Mount the 6.5" in the doors & wire them to the amp. Wire the 4" to the deck & now you have 6 speakers running. If you take the doors off you still have sound up front.

So, the deck will run speakers off of itself even if the RCAs are all hooked up? I wasn't sure if the RCAs being hooked up would confuse the deck trying to send power to the speaker wires.

[fordh8r]

So, the deck will run speakers off of itself even if the RCAs are all hooked up? I wasn't sure if the RCAs being hooked up would confuse the deck trying to send power to the speaker wires.

It will work just fine. 

[88_Pathy]

Don't know why but mine sounds great in an x-cab.  Alpine deck i-pod ready... ect, 4in Memphis audio m-class front and 6.5in Memphis audio m-class rear, super nice older 4 channel Memphis amp. Bridged the front 2 channels to run the speakers (works perfect and sounds PLENTY good), bridged the rear 2 channels to run the sub (10in kenwood in a 1.1 cuf box sealed). Loud, clean, bump.
Oh and I did have a tube in there and it sounded ok. Not half as good as a properly set up 10 though.

[jrock]

Have any pictures of how you fit the sub?