Members from Oklahoma,Arkansas,Miss, Mo,western TN, and eastern Tx check here

speedemon · April 16, 2006, 04:46:32 PM

Quote from: SWAMPER on April 11, 2006, 06:53:09 PM
Glen I work too darn much to have time to wrench on my truck....and what little time I may get off work...I dont want to spend wrenching....so thats why I have someone else do it...that way they work on it while I work....and when Im off I can play with it

the only thing you play with when your'e off work Pablo is your pud. btw has lethal got your truck runnin' yet

GoaT · April 16, 2006, 04:57:36 PM

http://board.marlincrawler.com/index.php?topic=23362.0

79coyotefrg · April 17, 2006, 10:03:33 AM

Quote from: speedemon55 on April 16, 2006, 04:46:32 PM
the only thing you play with when your'e off work Pablo is your pud. btw has lethal got your truck runnin' yet

yea and brainlessfool is stepping out on you swampy

SWAMPER · April 22, 2006, 06:54:30 AM

I dont play with my pud

that is the evil spot

AR80Toy · April 22, 2006, 07:35:53 AM

Arkansas Here , Sorry sooooo late too post here , I've been a member of this board for a month and just now getting around to it.

79coyotefrg · April 22, 2006, 08:26:37 AM

speedemon · May 01, 2006, 07:23:00 PM

Hey Arkansas guys, if you don't already know about it July 21, 22, and 23 is the TTORA national takeover in hot springs. Swampy and I will be there if he dosen't puss out at the last minute again.

79coyotefrg · May 01, 2006, 07:53:06 PM

cool beans, i was gonna try and get up there next month and look around during the razorback ramble next month

i have lots of ifs parts for sale, and i cant work, please be generous Oh Pablo i have a ifs steering box for you

hubs, all ifs steering components

grapevinemudder · May 04, 2006, 05:45:07 PM

Glenn I might need those ball joints you talked about. Got to get it on a lift and make sure its the problem 1st though.

79coyotefrg · May 04, 2006, 05:52:55 PM

just email me on the [email protected] address

i'll get the drivers side off tomorrow if it doesnt rain

befor you raise the frame put a piece a steel block between the bump stop and upper a arm , this will give you more room to remove the ball joint

speedemon · May 10, 2006, 07:59:04 PM

i finally started a build thread on my '84
http://board.marlincrawler.com/index.php?topic=24190.new#new

burnyota · May 12, 2006, 09:07:06 PM

where the heck is that mexian?? are you still protesting swamper? are you in a jail cell getin'

??

shaun needs his tires!!!!

SWAMPER · May 14, 2006, 04:51:48 PM

Haha nah Im not done protesting....Yeah I spoke to Shaun like 3 days ago hes not really in a hurry as long as I dont drive on em alot...which I dont I proly drive it once a week I told him Id proly be going up there to take advantage of your superior welding abilitys :flame: and build some bumpers...but I got to get the 85 up and running first

burnyota · May 15, 2006, 08:27:33 AM

dude- get off your ass and get on the road.........punk

SWAMPER · May 16, 2006, 07:40:05 PM

Sorry that was kevin that's what happends when you leave the puter unatended while still logged on...and now he is lafing in back of me like a moron

79coyotefrg · May 16, 2006, 07:52:19 PM

Quote from: SWAMPER on May 16, 2006, 07:40:05 PM
hey this is pablo, im gay, dont tell anyone

brainlessfool will be

to Texas tonight

burnyota · May 16, 2006, 09:09:29 PM

Quote from: 79Coyotefrg on May 16, 2006, 07:52:19 PM
brainlessfool will be to Texas tonight

ok...and he is

out swampers

?

speedemon · May 17, 2006, 05:32:37 PM

hehehe ya it was funny though $That\'s Gay$

burnyota · May 17, 2006, 06:55:30 PM

DAMNIT!!!!!I DROPPED MY MOTOR OFF AT THE MACHINE SHOP 5MOS AGO AND ITS STILL NOT READY!!!!!!!!

79coyotefrg · May 17, 2006, 07:11:24 PM

man go get that motor

SWAMPER · May 17, 2006, 07:22:40 PM

Yeah burn I told you yank it out of there and dont pay em for poop

burnyota · May 17, 2006, 07:31:09 PM

yea i know...I checked it out and they had the block with pistons together and my sweet lc parts sittin' there like anything else, the head was with a bunch of other ones and had hardly done anything to it......they said they were waiting on my springs so they could check for clearance that was a month ago...and it just looked like it was "ok"

SWAMPER · May 17, 2006, 07:32:16 PM

Yank it out dawg

red · May 17, 2006, 08:10:25 PM

sounds to me like a load of crap. i'd pick up the motor and wouldnt pay a penny.

79coyotefrg · May 18, 2006, 05:53:37 AM

i'd turn them in to the better business bureau

burnyota · May 18, 2006, 07:03:11 PM

talked to the machine shop today, and supposidly the head is finished and the motor will be done this sat or monday...we'll see about that.
-glen anything inparticular that i should check before i give him the rest of the $$?

79coyotefrg · May 19, 2006, 05:55:17 PM

look at the block to make sure it has a cross hatch on the walls of it,
make sure they didnt put cheap rubber seals on your valves, cause that crap aint what comes in a LC kit

did they bore it?? stop somewhere and get a cheap caliper and make sure its at 94mm if thats what you ordered

79coyotefrg · May 19, 2006, 05:57:08 PM

if he is assembling the motor completely nothing you can see really just keep your fingers crossed

79coyotefrg · May 30, 2006, 02:53:38 PM

Quote from: speedemon55 on May 01, 2006, 07:23:00 PM
Hey Arkansas guys, if you don't already know about it July 21, 22, and 23 is the TTORA national takeover in hot springs. Swampy and I will be there if he dosen't puss out at the last minute again.

i just talked to Marlin and he said he's considering driving old red out for this event

Marlins coming to Arkansas

burnyota · May 30, 2006, 03:20:47 PM

marlin----you better get the dictionary out if you plan on commin to the south...guess we all talk t-o-y-o-ta though

News:

Members from Oklahoma,Arkansas,Miss, Mo,western TN, and eastern Tx check here