thegoofster21 1 tons on the runner sold

[thegoofster21]

well i finally got some 1tons for my runner. i traded my toyota axles and got chevy 1tons out of an 85 pickup with new parts. the runner is now sitting on stock 83 toy axles and some bald 35s, when its all done it should have hydro asst, 5.71 gears and for welded diffs. i have 39.5s but im looking to trade them for 42s or bigger. it most likely will be a slow build but i will have it done before mcr so you will see it going through the box  all i need now is the tires gears and some more odds and ends.   if anybody as any suggestions id like to hear them thanks..

[NorCalToy]

sick, so no more selling the runner? that thing looks good...

[dniel]

If you are not going to link it look into sky's full width shackle kit for toyotas. These make the swap very simple and if you want to get creative with the spacers it comes with you can move the shackle forward of the body mount. You will also have to move the front hanger of course but this will let you move the axle as far forward as you want.



Looks like you're going six lug. What kind of knuckles are those. 

[46&2]

Awww the 4runner looks so cute with the little bald 35s 

This should be sick. I'm pretty busy most of the time but if you need any help wrenching you got my number 

[Hyena]

looks like 8 lug to me with stock knuckles!  should be pretty sick.  go 35 spline stub shafts right off the bat, don't mess with those 30 splines.  let me know about that ifs box.

[Duffil]

[thegoofster21]

If you are not going to link it look into sky's full width shackle kit for toyotas. These make the swap very simple and if you want to get creative with the spacers it comes with you can move the shackle forward of the body mount. You will also have to move the front hanger of course but this will let you move the axle as far forward as you want.



Looks like you're going six lug. What kind of knuckles are those. 

thanks yeah i needed to know were to get the shackles at. yeah im going a lug just the 6 studs

[thegoofster21]

and just just traded my 6 lug beadlocks for these

[thegoofster21]

sick, so no more selling the runner? that thing looks good...

going to keep the runner was going to build my 04 tacoma but the way i wheel i would hurt it

[thegoofster21]

Awww the 4runner looks so cute with the little bald 35s 

This should be sick. I'm pretty busy most of the time but if you need any help wrenching you got my number 

you know i will be calling you

[AaronB]

so if you have 6 lug hubs why did you swap for 8 lug rims?

[thegoofster21]

so if you have 6 lug hubs why did you swap for 8 lug rims?

i have 8 lug hub and the steering knuckle is 6

[thegoofster21]

looks like 8 lug to me with stock knuckles!  should be pretty sick.  go 35 spline stub shafts right off the bat, don't mess with those 30 splines.  let me know about that ifs box.

may just go with the bobby longs!!!!

[Hyena]

that will work too!

[dniel]

Are you talking about the longfield joints or the dana 60 CVs? The CVs are not that much more expensive than superior shafts with ctm joints once you add it all up. My axle came with yukons which are much cheaper than either of those but probably not nearly as strong. If I can't keep the yukons together I will be saving my pennies for longfield CVs.

The little one is a 30 spline long.

[thegoofster21]

Are you talking about the longfield joints or the dana 60 CVs? The CVs are not that much more expensive than superior shafts with ctm joints once you add it all up. My axle came with yukons which are much cheaper than either of those but probably not nearly as strong. If I can't keep the yukons together I will be saving my pennies for longfield CVs.

The little one is a 30 spline long.

i want them bad

[thegoofster21]

i just had to put up this pic sorry cole

[thegoofster21]

anybody have 42s they want to trade for 5 39.5 iroks 15" rim four of them have 95% left and one as 12%?

[AaronB]

ah, i see now

[thegoofster21]

yeah i wish i could have stayed 6 lug i like my old bead locks better

[Doof]

when i get out of school ill be down to burn some rod or turn a wrench... hit me up in about 5 months or so

[thegoofster21]

i will be callin u for sure 

[thegoofster21]

i have not done a dang thing way to cold!  oh may have sold my 39.5. yay!!

[thegoofster21]

yup sold my tires now i need some 42s

[-Matt-]

subscribing 

[Jud]

Your shits gonna be sik with tons!

[thegoofster21]

or should i build this

[Doof]

taco

[46&2]

Boo 4runner is already built just needs a little tweak or two stick with the runner 

[79yota350]

build the runner. its allways good to have a spare rig for dd.  then you dont have to worry if you break something on the runner.