Author Topic: thegoofster21 1 tons on the runner sold (Read 14279 times)

thegoofster21 · « **on:** Feb 15, 2009, 07:57:53 AM »

well i finally got some 1tons for my runner. i traded my toyota axles and got chevy 1tons out of an 85 pickup with new parts.

the runner is now sitting on stock 83 toy axles and some bald 35s, when its all done it should have hydro asst, 5.71 gears and for welded diffs. i have 39.5s but im looking to trade them for 42s or bigger. it most likely will be a slow build but i will have it done before mcr so you will see it going through the box

all i need now is the tires gears and some more odds and ends. $Beer Chug\'n$ if anybody as any suggestions id like to hear them thanks..

NorCalToy · « **Reply #1 on:** Feb 15, 2009, 09:55:51 AM »

sick, so no more selling the runner? that thing looks good...

dniel · « **Reply #2 on:** Feb 15, 2009, 12:00:00 PM »

If you are not going to link it look into sky's full width shackle kit for toyotas. These make the swap very simple and if you want to get creative with the spacers it comes with you can move the shackle forward of the body mount. You will also have to move the front hanger of course but this will let you move the axle as far forward as you want.

Looks like you're going six lug. What kind of knuckles are those.

46&2 · « **Reply #3 on:** Feb 15, 2009, 12:05:17 PM »

Awww the 4runner looks so cute with the little bald 35s

This should be sick. I'm pretty busy most of the time but if you need any help wrenching you got my number

Hyena · « **Reply #4 on:** Feb 15, 2009, 12:33:50 PM »

looks like 8 lug to me with stock knuckles! should be pretty sick. go 35 spline stub shafts right off the bat, don't mess with those 30 splines. let me know about that ifs box.

Duffil · « **Reply #5 on:** Feb 15, 2009, 12:40:06 PM »

thegoofster21 · « **Reply #6 on:** Feb 15, 2009, 04:19:26 PM »

Quote from: dniel on Feb 15, 2009, 12:00:00 PM

If you are not going to link it look into sky's full width shackle kit for toyotas. These make the swap very simple and if you want to get creative with the spacers it comes with you can move the shackle forward of the body mount. You will also have to move the front hanger of course but this will let you move the axle as far forward as you want.

Looks like you're going six lug. What kind of knuckles are those.

thanks yeah i needed to know were to get the shackles at. yeah im going a lug just the 6 studs

thegoofster21 · « **Reply #7 on:** Feb 15, 2009, 04:22:41 PM »

and just just traded my 6 lug beadlocks for these

thegoofster21 · « **Reply #8 on:** Feb 15, 2009, 04:26:38 PM »

Quote from: NorCalToy on Feb 15, 2009, 09:55:51 AM

sick, so no more selling the runner? that thing looks good...

going to keep the runner was going to build my 04 tacoma but the way i wheel i would hurt it

thegoofster21 · « **Reply #9 on:** Feb 15, 2009, 04:27:23 PM »

Quote from: fortysixandtwo on Feb 15, 2009, 12:05:17 PM

Awww the 4runner looks so cute with the little bald 35s

This should be sick. I'm pretty busy most of the time but if you need any help wrenching you got my number

you know i will be calling you

AaronB · « **Reply #10 on:** Feb 15, 2009, 05:12:35 PM »

so if you have 6 lug hubs why did you swap for 8 lug rims?

thegoofster21 · « **Reply #11 on:** Feb 15, 2009, 05:22:56 PM »

Quote from: BIG "A" on Feb 15, 2009, 05:12:35 PM

so if you have 6 lug hubs why did you swap for 8 lug rims?

i have 8 lug hub and the steering knuckle is 6

thegoofster21 · « **Reply #12 on:** Feb 15, 2009, 05:25:09 PM »

Quote from: Hyena on Feb 15, 2009, 12:33:50 PM

looks like 8 lug to me with stock knuckles! should be pretty sick. go 35 spline stub shafts right off the bat, don't mess with those 30 splines. let me know about that ifs box.

may just go with the bobby longs!!!!

Hyena · « **Reply #13 on:** Feb 15, 2009, 05:43:11 PM »

that will work too!

dniel · « **Reply #14 on:** Feb 15, 2009, 05:59:53 PM »

Are you talking about the longfield joints or the dana 60 CVs? The CVs are not that much more expensive than superior shafts with ctm joints once you add it all up. My axle came with yukons which are much cheaper than either of those but probably not nearly as strong. If I can't keep the yukons together I will be saving my pennies for longfield CVs.

The little one is a 30 spline long.

thegoofster21 · « **Reply #15 on:** Feb 15, 2009, 06:18:59 PM »

Quote from: dniel on Feb 15, 2009, 05:59:53 PM

Are you talking about the longfield joints or the dana 60 CVs? The CVs are not that much more expensive than superior shafts with ctm joints once you add it all up. My axle came with yukons which are much cheaper than either of those but probably not nearly as strong. If I can't keep the yukons together I will be saving my pennies for longfield CVs.

The little one is a 30 spline long.

i want them bad

thegoofster21 · « **Reply #16 on:** Feb 15, 2009, 06:21:29 PM »

i just had to put up this pic sorry cole $Beer Chug\'n$

thegoofster21 · « **Reply #17 on:** Feb 15, 2009, 06:25:49 PM »

anybody have 42s they want to trade for 5 39.5 iroks 15" rim four of them have 95% left and one as 12%?

AaronB · « **Reply #18 on:** Feb 15, 2009, 06:32:19 PM »

ah, i see now

thegoofster21 · « **Reply #19 on:** Feb 15, 2009, 06:54:48 PM »

yeah i wish i could have stayed 6 lug i like my old bead locks better

Doof · « **Reply #20 on:** Feb 16, 2009, 03:42:42 PM »

when i get out of school ill be down to burn some rod or turn a wrench... hit me up in about 5 months or so

thegoofster21 · « **Reply #21 on:** Feb 16, 2009, 08:10:50 PM »

i will be callin u for sure $Beer Chug\'n$

thegoofster21 · « **Reply #22 on:** Feb 18, 2009, 08:24:33 PM »

i have not done a dang thing way to cold! oh may have sold my 39.5. yay!!

thegoofster21 · « **Reply #23 on:** Feb 19, 2009, 06:38:54 PM »

yup sold my tires now i need some 42s

-Matt- · « **Reply #24 on:** Feb 19, 2009, 10:43:53 PM »

subscribing

Jud · « **Reply #25 on:** Feb 21, 2009, 02:50:32 AM »

Your shits gonna be sik with tons!

thegoofster21 · « **Reply #26 on:** Feb 21, 2009, 09:24:32 PM »

or should i build this

Doof · « **Reply #27 on:** Feb 21, 2009, 09:28:16 PM »

46&2 · « **Reply #28 on:** Feb 21, 2009, 09:50:52 PM »

Boo 4runner is already built just needs a little tweak or two stick with the runner $Beer Chug\'n$

79yota350 · « **Reply #29 on:** Feb 21, 2009, 10:00:46 PM »

build the runner. its allways good to have a spare rig for dd. then you dont have to worry if you break something on the runner.

thegoofster21 [OP]

thegoofster21 [OP]

thegoofster21 [OP]

thegoofster21 [OP]

thegoofster21 [OP]

thegoofster21 [OP]

thegoofster21 [OP]

thegoofster21 [OP]

thegoofster21 [OP]

thegoofster21 [OP]

thegoofster21 [OP]

thegoofster21 [OP]

thegoofster21 [OP]

thegoofster21 [OP]

Related Topics