Project BoostedRunner, SOLD

[NITE KRAWLERS]

same here yo!! And caleb is off getting married man!!





                          "PAGE 55 BROUGHT TO YOU BY NK"

[pumkin toy]

ha ha  you guys are funny!  nice pic Dustin

[minicrawlin]

what are you doing on the internet machine c-murd!!?? your in f-ing hawaii bro! ha ha ha

Congrats btw!!!

[NITE KRAWLERS]

ya man happy wed n day man!! Hope is was great time!! Congrats bro!!

[NITE KRAWLERS]

oh and ya get off the e net machine and go surf bra!! Oh and don't forget to grab a moped and mobb around yo!! HA HA man must be nice to have a sick runner and go to hawaii too! HAve fun anyhow and watch out for SHARKS....lol

[SCyotacrawler420]

how did you do your bellhousing swap from 7mgte to r151?

[THK Matt]

how did you do your bellhousing swap from 7mgte to r151?

He got the 4runner already swapped

[SCyotacrawler420]

oh, i just want to know how much people milled off there bellhousings because all these people did these swaps but know one will say measurements

[THK Matt]

oh, i just want to know how much people milled off there bellhousings because all these people did these swaps but know one will say measurements

never heard of milling the BH for this swap...
new one to me

[yoter4x4]

ya dude your off in hawaii and i've been stuck in fricken gillete with no e net machine, my congrats to you too man!! you and heather look great together!

[NITE KRAWLERS]

ya dude your off in hawaii and i've been stuck in fricken gillete with no e net machine, my congrats to you too man!! you and heather look great together!

he still wont let ya drive his runner no matter how much ya say him and his wife look good together so stop trying!! HA HA We all know that's wat your getting at.. LOL No really they do make a great couple, oh and the cat... Maybe star and cat could hook up!!! HUh

[pumkin toy]

how did you do your bellhousing swap from 7mgte to r151?

The previous owner installed a complete bellhousing replacement adaptor from monster performance.  it bolts the 7mgte directly to the r151f

[pumkin toy]

Congrats btw!!!

Thanks Tim!

ya man happy wed n day man!! Hope is was great time!! Congrats bro!!

Thanks alot dude! It was a great day and a great trip all together

ya dude your off in hawaii and i've been stuck in fricken gillete with no e net machine, my congrats to you too man!! you and heather look great together!

Yeah gillete is pretty crappy! ha ha  Thanks bro!

[SCyotacrawler420]

could you measurea the overall length of the bellhousing? im going to cut 2 in half cause i have not heard anything back from monster performance about getting a bellhousing, this is the only part holding me up on my project thanks you

[NITE KRAWLERS]

Welcome back home bra!!

[pumkin toy]

could you measurea the overall length of the bellhousing? im going to cut 2 in half cause i have not heard anything back from monster performance about getting a bellhousing, this is the only part holding me up on my project thanks you

yeah those dudes at monster performance are kinda flaky!  I emailed them a few times and they never got back to me.  My bellhousing measures 6 5/16" deep, plus they also put in a 1/4" thick spacer plate between the tranny and the bellhousing. So that makes the overall length 6 9/16".  Hope that helps bro!

[yjay]

You are having better luck with stock inner axles than you did with the birf eliminator in your previous rig?

[pumkin toy]

You are having better luck with stock inner axles than you did with the birf eliminator in your previous rig?

Word..... I destroyed birf elim's left and right almost every time I ran a hard trail.  and I was only runnin 37's on the orange truck!

[minicrawlin]

hawaii, marriage, cute couples         ha ha just kidding man but seriously. . . . .

you gonna let us in on your plans with those bad     axles your buyin or what!?     

[pumkin toy]

you gonna let us in on your plans with those bad     axles your buyin or what!?     

Plans arent set in stone yet, still waiting for the dude to get all the cash to buy my axles and such.  he should have it this week I hope.

[Uncle Ben]

Word..... I destroyed birf elim's left and right almost every time I ran a hard trail.  and I was only runnin 37's on the orange truck!

Birf Eliminators are not a good design.  They would be better if the inner axle was supported.  In the early days they were an upgrade but with Bobby pumpin' out the awesome birfs he does the BE is simply obsolete.

[Uncle Ben]

Whoa.......the guy exchanges rings and signs on the dotted line and this thread dies immediately....what up?

[pumkin toy]

Whoa.......the guy exchanges rings and signs on the dotted line and this thread dies immediately....what up?

ha ha   it has nothing to do with that Uncle Ben!   The rig is just chillin in the garage for now.  waiting to get the cash from a guy that is buying my complete axles, steering, and suspension setup.  Once that deal goes through, the plan is to go 80 series axles with four link rear and three link front with air shocks all the way around.  Also planning on doving the front and rear, I dont like how fat my runner is lookin

[Uncle Ben]

ha ha   it has nothing to do with that Uncle Ben!   The rig is just chillin in the garage for now.  waiting to get the cash from a guy that is buying my complete axles, steering, and suspension setup.  Once that deal goes through, the plan is to go 80 series axles with four link rear and three link front with air shocks all the way around.  Also planning on doving the front and rear, I dont like how fat my runner is lookin

Gee....that sounds original! ;-p

[pumkin toy]

original as what?  there are not that many guys running 80 series axles dude!

[Jordan7118]

...This thread is about to get really interesting 

Can't wait to see what you do! I'm watchin' 

[pumkin toy]

...This thread is about to get really interesting 

Can't wait to see what you do! I'm watchin' 

yeah it should get pretty sick!  Hopefully everything works out as planned with the guy buying my parts. There really shouldnt be any problems, he said his loan has already been approved and should be getting the funds in a week.

[Uncle Ben]

original as what?  there are not that many guys running 80 series axles dude!

Beating you chops dude.....I was referring to my 40 with 80 axles, 4 link in rear and 3 link in front.  Works for me!

[pumkin toy]

Beating you chops dude.....I was referring to my 40 with 80 axles, 4 link in rear and 3 link in front.  Works for me!

thats what I figured!  Your rig deffinately works too

[Jordan7118]

yeah it should get pretty sick!  Hopefully everything works out as planned with the guy buying my parts. There really shouldnt be any problems, he said his loan has already been approved and should be getting the funds in a week.

Dang. That's a chunk of change you're about to get if he had to take out a loan!!! Nice!