Juds One Ton Single Cab

Jud · January 07, 2010, 12:04:22 PM

Got both axles and suspension pulled. Also pulled the bed off so i can fully clean up the frame, cut off anything I don't need and fully weld/gusset everything properly/cleanly.

lilbuddy · January 07, 2010, 02:39:08 PM

1st gen beds are gay $That\'s Gay$

Steve_925 · January 08, 2010, 12:43:19 PM

dont forget about the windshield and back window on the chevy

Jud · January 09, 2010, 09:54:06 PM

Got a bunch of brackets, some 15" BBCS shocks, a D60/TOY drive flange in the mail and cut all my old rear brackets off along with the ugly stock spare tire mount/crossmember. Mainly waiting on money to get all the rest of the parts/materials.

86bobbedtoy · January 09, 2010, 10:53:16 PM

hay, thanks on the stabilizer.

Jud · January 09, 2010, 10:55:28 PM

Quote from: 86bobbedtoy on January 09, 2010, 10:53:16 PM
hay, thanks on the stabilizer.

No prob dood.

Duffil · January 09, 2010, 10:59:11 PM

Yota87Truck · January 09, 2010, 11:04:16 PM

i don't know how I have missed this build up thread. Nice truck!

Jud · January 09, 2010, 11:11:26 PM

Quote from: Yota87Truck on January 09, 2010, 11:04:16 PM
i don't know how I have missed this build up thread. Nice truck!

Thanks man!

Slolyfe · January 09, 2010, 11:35:20 PM

Pictures!?!?

Jud · January 09, 2010, 11:37:25 PM

Quote from: Slolyfe on January 09, 2010, 11:35:20 PM
Pictures!?!?

My computer took a

so no pics for a while. I'm down in Modesto at my moms on her computer. lol

snowshoebrue · January 10, 2010, 02:10:54 PM

Quote from: Jud on January 09, 2010, 11:37:25 PM
My computer took a so no pics for a while. I'm down in Modesto at my moms on her computer. lol

did you bring my groover with you?

Jud · January 10, 2010, 04:31:32 PM

Quote from: snowshoebrue on January 10, 2010, 02:10:54 PM
did you bring my groover with you?

Yes. I will drop it off this evening.

GotMyYotaBack · January 12, 2010, 08:40:35 PM

Thanks for the parts Judd

Now come over and help me put them on

Jud · January 17, 2010, 05:59:34 PM

Got some 4.70 gears and finally pulled the tons out from under the Chevy truck.

Not much building has gone on at all, been busy with work and party's. lol

Think I'm going to cut the front of my frame off just behind the front body mounts and extend it out with 2.5x2.5" receiver tubing. It will look super clean and I can just weld a plate on the top of it for a winch mount.

<James> · January 18, 2010, 04:12:17 PM

Quote from: Jud on January 17, 2010, 05:59:34 PM
Got some 4.70 gears and finally pulled the tons out from under the Chevy truck.

Not much building has gone on at all, been busy with work and party's. lol

Think I'm going to cut the front of my frame off just behind the front body mounts and extend it out with 2.5x2.5" receiver tubing. It will look super clean and I can just weld a plate on the top of it for a winch mount.

the tubing is such a legit idea I wish I would have done that in the beginning of my sas instead of taking all that time torching the ifs off I could have just made two cuts, and it would be way cleaner

Jud · January 18, 2010, 05:02:40 PM

Quote from: imanidiothaha on January 18, 2010, 04:12:17 PM
the tubing is such a legit idea I wish I would have done that in the beginning of my sas instead of taking all that time torching the ifs off I could have just made two cuts, and it would be way cleaner

Yea what can I say, you will never be as cool as me James... haha

-Matt- · January 18, 2010, 05:15:30 PM

hahaha it wasnt even your idea

Jud · January 18, 2010, 05:16:46 PM

Quote from: -Matt- on January 18, 2010, 05:15:30 PM
hahaha it wasnt even your idea

James doesn't have to know that though. lol

<James> · January 19, 2010, 09:00:40 AM

I didn't say it was my idea I just said I wish I would have done that

-Matt- · January 19, 2010, 05:55:31 PM

Quote from: imanidiothaha on January 19, 2010, 09:00:40 AM
I didn't say it was my idea I just said I wish I would have done that

haha we know james, i was just saying it was saying that to jud to mess with him.

Jud · January 25, 2010, 11:52:05 PM

Have a bunch of parts sitting in my room. Welded the rear shackles hangers on Friday night but ran outa gas for the welder halfway through weldeing the second one, so that was a short lived work session. I have all the suspension parts minus the front leafs springs. Got the 1ton brake booster/adapter, Toy/D60 drive flange, some 15" BBCS shocks with bumps for the front, Inchworm 4.70 gears, oh and my PSC steering arms came in the mail today.

I was gonna buy a bunch of parts this week but my desktop fagged off so I had to go buy a baller laptop today... haha

*** YELLER *** · January 26, 2010, 05:28:02 AM

thats great but where are the freekin pictures

kamakazecam · January 26, 2010, 10:24:41 AM

Quote from: ** YELLER ** on January 26, 2010, 05:28:02 AM
thats great but where are the freekin pictures

read more carefully..... his "desktop f*gged off so had to go buy a baller laptop"

iNfErNaL · January 26, 2010, 10:38:25 AM

Bad ass bro ! ! ! , didn't know you were going 1 tons

Slolyfe · January 26, 2010, 10:56:06 AM

Hey Jud do you have any pictures?

hahahahahahaha

*** YELLER *** · January 26, 2010, 11:43:15 AM

Quote from: kamakazecam on January 26, 2010, 10:24:41 AM
read more carefully..... his "desktop f*gged off so had to go buy a baller laptop"

I read it just fine

if he can get online at his moms he can download pictures.....@ his moms

kamakazecam · January 26, 2010, 11:57:27 AM

Quote from: ** YELLER ** on January 26, 2010, 11:43:15 AM
I read it just fine if he can get online at his moms he can download pictures.....@ his moms

-Matt- · January 26, 2010, 01:38:30 PM

its alright, none of us need to see pictures of dog

anyways

Doof · January 26, 2010, 03:28:55 PM

Quote from: ** YELLER ** on January 26, 2010, 05:28:02 AM
thats great but where are the freekin pictures

heres one for ya

News:

Juds One Ton Single Cab