MCR7 checklist time is ticking?????

Started by Blingn, July 29, 2008, 01:31:52 PM

0 Members and 3 Guests are viewing this topic.

Goose

Updated..

get single 4.7 case
Put it in
Modify Drivelines
Build Semi-Flatbelly Crossmember
Build Raised Solid Motor Mounts
Gut Interior
Build Rear Spring Hangers
Put Rear 63's on
Build New Shackles
Change Rear Axle Housing
Finish half doors
Get Steel

Probably More Im Forgetting..
Baller Status: Coming Soon To A Toyota Near You!...   :afro:

My Life Is A Very Complicated Drinking Game... -Me

90 ext. cab v6, SAS'd, 37's

94 4runner -work in progress

www.slagfactory.com

My Buildups:
'90 ext. cab
http://board.marlincrawler.com/index.php?topic=38260.new#new
'94 4Runner
http://board.marlincrawler.com/index.php?topic=53882.new#new

NorCalToy

Quote from: NorCalToy on August 14, 2008, 11:54:53 AM
man...ive got a bunch of stuff i gotta do if i wanna be able to get out there...and it all costs money... :rivers: nothing real simple...

so my list goes:

Registration
Windshield
Tires (lookin at some 33s)
sliders
make rear bumper bracket
get all safety list crap together
get plenty of food drink
save checks for gas money
dont break before MCR



i *think* thats it, im sure ill find more as i go along... :dunno: so i guess nothing too complicated just high cost (for me) and takes some time...
so now my dad is gonna go wtih me so my parents will help me out with the cash part of things :woohoo:
:willynilly: '89 truck SAS sittin on 35's, Tacoma rear axle w/ E-Locker, welded front

kneedownnate - You can go through life being scared of the possible, or you can have a little fun and tease the inevitable

iɹǝʌo ǝɯ ııoɹ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

:flamer: IFS

superyota

Quote from: NorCalToy on August 15, 2008, 04:17:02 PM
so now my dad is gonna go wtih me so my parents will help me out with the cash part of things :woohoo:
\

Lucky!
ABD Motorsports
#4475

If you can't convince them, confuse them.
Placer County Crawlers - President 2011-2016
www.placercountycrawlers.com

Rubicon Trail Foundation - Property Committee member
Friends of Fordyce - Board Member
KK6QDW

coods

so gonna add few things to the wonderful to do list.

fix rc crawler
install some kind of rollbar or exocage  (maybe) :dunno: any thoughts?
re wire rock lights
install new stereo deck.

and a reminder dont break before trip 

find another cooler for more beverages  :beerchug:




4runner17

new list.
1.install locker
2.gas/food
3.4wheel!

Goose

Quote from: coods on August 15, 2008, 06:59:48 PM

and a reminder dont break before trip 


That is a very important one right there!!
cant count the times ive broke :pokinit: the day before a run
Baller Status: Coming Soon To A Toyota Near You!...   :afro:

My Life Is A Very Complicated Drinking Game... -Me

90 ext. cab v6, SAS'd, 37's

94 4runner -work in progress

www.slagfactory.com

My Buildups:
'90 ext. cab
http://board.marlincrawler.com/index.php?topic=38260.new#new
'94 4Runner
http://board.marlincrawler.com/index.php?topic=53882.new#new

Tallchevy

Quote from: Tallchevy on August 05, 2008, 09:45:20 PM
Here is my list. Not in an specific order.

1. Moved steering box forward.

2. Install inchworm 5.1 t-case.

3. Install All Pro driveline disc brake.

4. Install Detroit in rear axle.

5. Reinstall the c.b.

6. Take the top off & install the bikini top.




Locker not that important but would be nice.



Quote from: fordh8r on August 14, 2008, 08:37:02 AM
:psss: don't you mean move steering box forward?  :gap:
At the time I didn't think we had time to move the box.
Thanks for the help  :beer:
:angry: My child is an honor student at Anton Levay's School of Satanic Arts :angry:

87 4Runner redo
http://board.marlincrawler.com/index.php?topic=41959.0
87 Toyota 4Runner, SAS Rig Gallery
http://board.marlincrawler.com/index.php?topic=29877.msg3

fordh8r

Quote from: Tallchevy on August 17, 2008, 12:41:41 AM
At the time I didn't think we had time to move the box.
Thanks for the help  :beer:
It's all good!  :thumbs:  Glad we did it.  8)


Quote from: Tallchevy on August 17, 2008, 12:41:41 AM
Locker not that important but would be nice.


We still have time... :gap:  We're just waiting on a certain individual to get his  :pokinit: back  :tantrum:... :whistle:

Blingn

MCR LIST:
volt reg-  DONE
ALT- DONE
gauges -DONE
shocks-DONE
roll bar-DONE
spacers-DONE
battery mount
fire extenquisher mount
oba
rock lights-REAR DONE
sliders (home brew for now)
cd player
cb
adjust clutch-DONE
half doors

Blingn

update no last minute :pokinit: for me

MCR LIST:
volt reg-  DONE
ALT- DONE
gauges -DONE
shocks-DONE
roll bar-DONE
spacers-DONE
battery mount
fire extenquisher mount
oba
rock lights-REAR DONE
sliders (home brew for now)
cd player
cb
adjust clutch-DONE
half doors

46&2

#70
Update:

Put Optima in
Replace leaking power steering hose
Rebuild front axle
Find new rear axle housing
Swap all my axle parts to new housing
weld on shock tabs
new dif breathers, extend rear into bed
dif armor front and rear
Oil change for the tranny, tcases, and axles
pick up as many spare parts as i can
make half doors more bling bling
beer to motivate wrenching
re-bust out camping gear
girlfriend needs to get the time off

I need to get to work...
85 4Runner Build  /  Cool Foreign Toyotas  /  Toyota: We Want Diesel FB Page    Rockcrawlintoy – i guess moms will put the pups up on the beach when they go fisting

blackdiamond

Quote from: Mr. FFC on August 20, 2008, 12:16:31 PM
update no last minute :pokinit: for me

MCR LIST:
volt reg-  DONE
ALT- DONE
gauges -DONE
shocks-DONE
roll bar-DONE
spacers-DONE
battery mount
fire extenquisher mount
oba
rock lights-REAR DONE
sliders (home brew for now)
cd player
cb
adjust clutch-DONE
half doors


You are forgetting the #1 Item: Load FCC in the passenger seat.  :yesnod:
1989 4Runner: Dual Ultimate (Inchworm front & Marlin 4.70 rear), Marlin Twin Stick, 1200-lb clutch, 4.88 R&P, Aussie Front, Detroit rear, 30-spline Longs, Long hub gears, ARP hub and knuckle studs & 35x12.50 Cooper STT PRO tires.  Marlin rear bumper & sliders.  FROR front bumper.  SAS with Alcan springs & Rancho 9000XL shocks.  Budbuilt Bolt-on traction bar.  Custom Interior Cage by Those Guys Rod and Customs.

Moab Tested & Rubicon Approved

ROCKO

Quote from: ROCKO on July 29, 2008, 02:25:57 PM
order some longs and install them
chase my small oil leak (i think i fixed it last nite)DONE

fill up the truck and get to the springs



edit: build a roll cage for the runner and maybe canvas top (starting 08/12/08)
JUST ANOTHER ROCK CRAWLER....
with a lot of good stuff

F@$K CANCER

Doof

update:

front tube bumper built and painted
fresh paint
get spare birfs
TG's dif armor
gas
put together a wheeling box/first aid kit
fluids and tighten er-thang
duals
swap out ECU

coods

i just installed longfields so i am bringing my olds if anybody needs them will have three extra birfs with me

4runner17

nothing left for me to do but fuel up and go

coods



BLACKDOG

Quote from: Mr. FFC on August 20, 2008, 12:16:31 PM
update no last minute :pokinit: for me

MCR LIST:
volt reg-  DONE
ALT- DONE
gauges -DONE
shocks-DONE
roll bar-DONE
spacers-DONE
battery mount
fire extenquisher mount
oba
rock lights-REAR DONE
sliders (home brew for now)
cd player
cb
adjust clutch-DONE
half doors


better get those sliders done!!  :bat:
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

fordh8r


werty

any one need a 83 housing? I will bring it with me. trade for well... anything.

werty

Quote from: werty on July 31, 2008, 09:38:09 PM
Get zip ties, done
food, rice and beans
rum, got it
bumpers, still working on it
CB, hand held.
rum
fix radiator fan, got two motors for the trip
rum and more rum, maybe a beer too!

Goose


Updated..

get single 4.7 case
Put it in

Modify Drivelines
Build Semi-Flatbelly Crossmember
Build Raised Solid Motor Mounts
Gut Interior
Build Rear Spring Hangers
Put Rear 63's on
Build New Shackles
Change Rear Axle Housing
Finish half doors
Buy Optima Battery
Buy new bushings
Get Steel

Probably More Im Forgetting..
:willynilly:
Baller Status: Coming Soon To A Toyota Near You!...   :afro:

My Life Is A Very Complicated Drinking Game... -Me

90 ext. cab v6, SAS'd, 37's

94 4runner -work in progress

www.slagfactory.com

My Buildups:
'90 ext. cab
http://board.marlincrawler.com/index.php?topic=38260.new#new
'94 4Runner
http://board.marlincrawler.com/index.php?topic=53882.new#new

blackdiamond

Quote from: blackdiamond on August 05, 2008, 07:14:55 AM
I went wheeling on Friday and the local "easy" ORV park and managed more damage that I have done in my entire off road experience.  Now I have to get the rear driveshaft and a portion of the exhaust repaired before I head south.  I missed the line on a large rock and then it moved unexpectedly creating more problems.

:headshake:

(1) Driveshaft and Exhaust are repaired.
(2) Spill Kit & Poo bags have been delivered.
(3) MREs have been ordered.
(4) Rancho 9000XL shocks for the rear remain.
1989 4Runner: Dual Ultimate (Inchworm front & Marlin 4.70 rear), Marlin Twin Stick, 1200-lb clutch, 4.88 R&P, Aussie Front, Detroit rear, 30-spline Longs, Long hub gears, ARP hub and knuckle studs & 35x12.50 Cooper STT PRO tires.  Marlin rear bumper & sliders.  FROR front bumper.  SAS with Alcan springs & Rancho 9000XL shocks.  Budbuilt Bolt-on traction bar.  Custom Interior Cage by Those Guys Rod and Customs.

Moab Tested & Rubicon Approved

46&2

#84
Update:

Put Optima in
Replace leaking power steering hose
Rebuild front axle drivers side
Rebuild front axle passenger's side
Helicoil stripped caliper bolt and rethread passengers knuckle
Find new rear axle housing
Redrill pitman arm and move drag link to the top of pitman arm
Swap all my axle parts to new housing
weld on shock tabs
new dif breathers, extend rear into bed
dif armor front and rear
Oil change for the tranny, tcases, and axles
pick up as many spare parts as i can
make half doors more bling bling
beer to motivate wrenching
re-bust out camping gear
girlfriend needs to get the time off
85 4Runner Build  /  Cool Foreign Toyotas  /  Toyota: We Want Diesel FB Page    Rockcrawlintoy – i guess moms will put the pups up on the beach when they go fisting

fordh8r

So the list as it stands...

          -finish half doors-----Almost there! -DONE!

          -relocate rear brake line Done!

          -replace the rear shocks Done!

          -tune CB antenna Done!

          -finish stereo  DONE!

          -sand and paint the hood and roof  Almost done... :gap:

          -I might be getting a detroit for the rear...hopefully in time for the
           trip     Still a possibility.  :biggthumpup:

          -(wishful thinking here) OBA. --- Definitely not happening before
            MCR.  :thumbdown:

          -Then, of course, the ritual of servicing the rig right before the trip.

              -you know, greasing the chassis checking the fluids, making sure
               everything is tight....     

           -Load all my 

           -hit the road 

           -have a good time!     

          That is all.....fer now!   

Reynolds

Me?

Tighten up front u-bolts
Possibly build custom Action Packer holder (not necessary)
Check lug nuts
Pack truck
Wait to get paid the week before the run :D
-Brian

4runner17

Quote from: werty on August 27, 2008, 11:04:07 PM
any one need a 83 housing? I will bring it with me. trade for well... anything.
i need another front housing. mine is bent. unfortunatly im to broke to buy one just yet.

lilbuddy

My list:

Weld broken FROR Crossmember
Tighten all bolts
Rotate tires (Maybe???)
Check oil (change it maybe???)
Weld holes in fenders where stock fender flares were
Paint any parts that need painted more
Gas/Load truck
RIP Kyota.... you are the man

GET IT!!!

kiyul4130

Quote from: LILBUDDY on August 28, 2008, 07:30:13 PM
My list:

Weld broken FROR Crossmember
Tighten all bolts
Rotate tires (Maybe???)
Check oil (change it maybe???)
Weld holes in fenders where stock fender flares were
Paint any parts that need painted more
Gas/Load truck

screw your list man, screw your list............ :(
-kiyul-
92 1 ton ex cab, marlin dual ultimates, 42 iroks, hydro assist, flat bellied, linked and more...
ECV 7-11

KYOTA FOREVER