1973 HILUX Racer 4508

Started by Steve_925, July 26, 2008, 09:34:52 PM

0 Members and 10 Guests are viewing this topic.

Steve_925

1973 HILUX build up-------> http://board.marlincrawler.com/index.php?topic=48133.new#new


UA 342
STEAMFITTERS

Slolyfe

I only took 2 pictures. Here is one.

You'll never take me alive

Steve_925

Thought I would finally update this. Alot has happened since memorial. Started getting it ready to race by adding a 32 gallon fuel cell, finally got some 2.5 coil overs for the front and moved the 2.0s out back, tail light bar, had to add a oil cooler to try to get my temps down, and reworked some suspension.
When to fordyce a few weeks ago with mostly good results, something on my truck doesn't like really deep water and I kept blowing a fuse in the middle of the water crossings, that sucked.

Last weekend was my first race, at nor cal rock race. Got 2nd the first two heats with a blown out resi on my rear shock. It still handled pretty good for no dampining on that shock. Rolled it in practice pretty hard trying to take a turn too fast. Sway bar is next on my list. In the main I took the whole shot( this motor screams) and about one and a half laps into the race while I was in first I couldn't get the tranny into a gear. Pretty sure I smoked my brand new LCE clutch. The race was a blast and I was very impressed with my truck for not having a sway bar or any shock tuning.
the next project is going to be to try to get my cases and tranny out without having to pull my motor.

I'll post some pictures when I get home
1973 HILUX build up-------> http://board.marlincrawler.com/index.php?topic=48133.new#new


UA 342
STEAMFITTERS

Steve_925

If you have a facebook look up East Bay Racers and like our team
1973 HILUX build up-------> http://board.marlincrawler.com/index.php?topic=48133.new#new


UA 342
STEAMFITTERS

THK Matt

2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

fordh8r

Nice! :clap: sounds like a good time. I didn't realize you were doing all that work to race your truck. Sounds like the pay off was worth it! :bowdown:

Steve_925

the pay off was defiantly worth it.

















1973 HILUX build up-------> http://board.marlincrawler.com/index.php?topic=48133.new#new


UA 342
STEAMFITTERS

nisota

Awesome pics, looks like alot of fun.
Oregon wheelin'
82' 2wd-4wd project
http://board.marlincrawler.com/index.php?topic=89180.0

superyota

Your truck is sick! I love the v8. Just watched the video 3 times! Lol. Awesome man.
ABD Motorsports
#4475

If you can't convince them, confuse them.
Placer County Crawlers - President 2011-2016
www.placercountycrawlers.com

Rubicon Trail Foundation - Property Committee member
Friends of Fordyce - Board Member
KK6QDW

jrock


koppersvette


Steve_925

finally got my clutch out.......yikes


gonna have to call LCE tomorrow and see what they say








1973 HILUX build up-------> http://board.marlincrawler.com/index.php?topic=48133.new#new


UA 342
STEAMFITTERS

THK Matt

2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

Steve_925

Quote from: THK Matt on August 19, 2012, 11:51:34 AM
wow.. warranty much?

it says on there site that racing voids the warranty, so im screwed. i really just want to know what causted this and get it back together asap
1973 HILUX build up-------> http://board.marlincrawler.com/index.php?topic=48133.new#new


UA 342
STEAMFITTERS

THK Matt

Quote from: Steve_925 on August 19, 2012, 03:35:15 PM
it says on there site that racing voids the warranty, so im screwed. i really just want to know what causted this and get it back together asap

Bummer, what engine is the clutch for? being as they didnt have a 1UZ 5spd.
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

Steve_925

It's a 3.0 flywheel and clutch
1973 HILUX build up-------> http://board.marlincrawler.com/index.php?topic=48133.new#new


UA 342
STEAMFITTERS

freds40

What's the clamping force on that clutch Steve?
"between projects"

x250f23x


fordh8r

The way that thing is sheared off at the rivets, I would say that is from heavy or harsh engagements at take off or shifting quickly and slamming on the throttle. The weak point will almost always be the rivets.  :cool:

Good job tearing that :pokinit: up though!  :bowdown:

THK Matt

2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

TacoRunner

Steve

You know what this means dont you. Means you cant drive for :pokinit::rofl2: :rofl2: Sorry bro I had to say it. It was on the table to be said. You know Im messin with you. Sorry about the clutch.
www.4WHEELUNDERGROUND.com
[email protected]
AKA The GODFATHER The 3RZ Original

Performance Tuned shocks for Leaf Sprung Vehicles   http://www.4wheelunderground.com/Tuning.html

jrock

Time to put that auto in...A340? It's not a terrible swap. I also hear that trans is strong....

koppersvette


Slolyfe

You'll never take me alive

Steve_925

Got a new clutch disc from clutch masters, six puck full ceramic. They tweaked and freshed up my pressure plate. Just have to figure out how I'm going to get my tranny back in, it was a pita to get it out. Just shipped out two of my coil overs to f-o-a to get fixed and rebuilt. Hopefully the shox get back in time to make it to the round up, otherwise I'll be riding with my dad.
1973 HILUX build up-------> http://board.marlincrawler.com/index.php?topic=48133.new#new


UA 342
STEAMFITTERS

Steve_925

Want to co-drive for me on the September 30 race?
1973 HILUX build up-------> http://board.marlincrawler.com/index.php?topic=48133.new#new


UA 342
STEAMFITTERS

Slolyfe

Quote from: Steve_925 on September 05, 2012, 10:45:55 AM
Want to co-drive for me on the September 30 race?

For sure! I was going to try to talk bret into letting me race his truck since he will be gone. Hahaha Co-driving sounds like a better time.
You'll never take me alive

Steve_925

It's ready to go! Got my go pro mounted up too so I'll have some footage after the round up.
I'm also picking up some 37" pit bull rockers on my way home
1973 HILUX build up-------> http://board.marlincrawler.com/index.php?topic=48133.new#new


UA 342
STEAMFITTERS

builttoabuse

Quote from: Steve_925 on August 19, 2012, 11:45:11 AM
finally got my clutch out.......yikes


gonna have to call LCE tomorrow and see what they say










lol looks fine run it! :)
toy obsessed!

Slolyfe

Made it from loon to buck in 45 min last year. Imagine what you can do with double the cylinders.
You'll never take me alive