Topic: tire fitment with SAS

[swamp_fox]

Would a set of 37x13x17 Boggers fit with the 6" SAS and rear suspension lift?  Hows the drivetrain holding up to the 35+ meats.

[swamp_fox [OP]]

would at least have chromally's out back.  Hopefully longfields up front.

[WHITE_TRASH]

Stock rears will hold up to a hell of a lot.  CroMo birfs in the front minimum.  Those tires will fit with abotu half that lift and some trimming and the front axle moved forward a few inches.

[Doable]

"Would a set of 37x13x17 Boggers fit with the 6" SAS and rear suspension lift? "


  Yes 37" will fit  very easily with that much lift.Just to say I'm running 3" lift and trimmed the sheet metal some and running 36" IROKS only problem is the front tires rubbing the springs, that will be cured when the wheel spacers show.  My stock rear axles are holding up fine, will upgrade  when I every brake it.

[Toymin8r]

Here is mine with 5" All Pro Springs and 37/13's.  With the shackles and spring hanger its probably closer to 7" of total lift and I think it sits too high.