Author Topic: 22rte Injector wire harness question (Read 1409 times)

RAZOR · « **on:** Jul 23, 2008, 08:26:27 AM »

alright, So I have burnt up 2 of my turbo injectors now due to the High current that is being pass through my #4 Injector only. I tried my spare computer, still does the same thing. I took some OHM readings last night determined that i have a short, somewhere within my wireharness. I believe it is right where the resistor wires meet for injectors 1 and 4. Does anyone know where these are tied together in the wire harness? Or better yet, if you have had this problem before, Point me in the right direction. Thanks!

RAZOR · « **Reply #1 on:** Jul 23, 2008, 10:41:34 PM »

Bump.... HELP PLEASE!!!! Bigmike??? Anybody???

Cheesemaker · « **Reply #2 on:** Jul 24, 2008, 06:55:46 AM »

Do you have a FSM, use that for a diagram. Or best thing like I did was take out the harness and unwrap it and look for the problem. Find a spare harness with the same gauge wire, and splice. Or a factory 22re harness will work too! I took out the turbo motor setup and put in a 22re in mine, and it's the same, no matter what the fsm said.

Hope this helps!

RAZOR · « **Reply #3 on:** Jul 25, 2008, 07:12:51 AM »

Hmmm.... Anybody Know what a harness from the dealer cost? Or are they even available?

Cheesemaker · « **Reply #4 on:** Jul 25, 2008, 09:50:07 PM »

You really don't want to know!

Try some of these posts for parts!
http://board.marlincrawler.com/index.php?topic=47572.0
http://board.marlincrawler.com/index.php?topic=39620.0;topicseen

Just take the harness apart and find the issue!

Author Topic: 22rte Injector wire harness question (Read 1409 times)

RAZOR

22rte Injector wire harness question

RAZOR [OP]

Re: 22rte Injector wire harness question

Cheesemaker

Re: 22rte Injector wire harness question

RAZOR [OP]

Re: 22rte Injector wire harness question

Cheesemaker

Re: 22rte Injector wire harness question

Related Topics


	Author Topic: 22rte Injector wire harness question (Read 1409 times) 0 Members and 1 Guest are viewing this topic. RAZOR Rock Master Turtle Points: 0 Posts: 143 Member since Oct '05 It's all about the LongFields 22rte Injector wire harness question « on: Jul 23, 2008, 08:26:27 AM » alright, So I have burnt up 2 of my turbo injectors now due to the High current that is being pass through my #4 Injector only. I tried my spare computer, still does the same thing. I took some OHM readings last night determined that i have a short, somewhere within my wireharness. I believe it is right where the resistor wires meet for injectors 1 and 4. Does anyone know where these are tied together in the wire harness? Or better yet, if you have had this problem before, Point me in the right direction. Thanks! Logged Finally Straight Axled, e-Locker, 5.29's, Lockright Rear, 13" travel tractor spline driveshaft, CV eliminator, Fully Gusseted front axle, Marlins almighty 5" Trail Flex lift Kit, 36" TSL's In Marlin Crawler, I trust. If you got the Nuts, Follow my Ruts! Lift It, Fat Chicks Can't Jump! Motocross, Because it Requires 2! RAZOR [OP] Rock Master Turtle Points: 0 Posts: 143 Member since Oct '05 It's all about the LongFields Re: 22rte Injector wire harness question « Reply #1 on: Jul 23, 2008, 10:41:34 PM » Bump.... HELP PLEASE!!!! Bigmike??? Anybody??? Logged Finally Straight Axled, e-Locker, 5.29's, Lockright Rear, 13" travel tractor spline driveshaft, CV eliminator, Fully Gusseted front axle, Marlins almighty 5" Trail Flex lift Kit, 36" TSL's In Marlin Crawler, I trust. If you got the Nuts, Follow my Ruts! Lift It, Fat Chicks Can't Jump! Motocross, Because it Requires 2! Cheesemaker Rock Ninja Gold Turtle Award Turtle Points: 1363 Posts: 4,525 Member since Sep '04 Dean Tyler, you were an inspiration to all!! Re: 22rte Injector wire harness question « Reply #2 on: Jul 24, 2008, 06:55:46 AM » Do you have a FSM, use that for a diagram. Or best thing like I did was take out the harness and unwrap it and look for the problem. Find a spare harness with the same gauge wire, and splice. Or a factory 22re harness will work too! I took out the turbo motor setup and put in a 22re in mine, and it's the same, no matter what the fsm said. Hope this helps! Logged Miss ya Dean (4THEWKN) & Kyle (KYOTA)!! 4THEWKN~9/17/2006 If it wasn't for you, I'd be driving something other than a Toyota! My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0 Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen RAZOR [OP] Rock Master Turtle Points: 0 Posts: 143 Member since Oct '05 It's all about the LongFields Re: 22rte Injector wire harness question « Reply #3 on: Jul 25, 2008, 07:12:51 AM » Hmmm.... Anybody Know what a harness from the dealer cost? Or are they even available? Logged Finally Straight Axled, e-Locker, 5.29's, Lockright Rear, 13" travel tractor spline driveshaft, CV eliminator, Fully Gusseted front axle, Marlins almighty 5" Trail Flex lift Kit, 36" TSL's In Marlin Crawler, I trust. If you got the Nuts, Follow my Ruts! Lift It, Fat Chicks Can't Jump! Motocross, Because it Requires 2! Cheesemaker Rock Ninja Gold Turtle Award Turtle Points: 1363 Posts: 4,525 Member since Sep '04 Dean Tyler, you were an inspiration to all!! Re: 22rte Injector wire harness question « Reply #4 on: Jul 25, 2008, 09:50:07 PM » You really don't want to know! Try some of these posts for parts! http://board.marlincrawler.com/index.php?topic=47572.0 http://board.marlincrawler.com/index.php?topic=39620.0;topicseen Just take the harness apart and find the issue! Logged Miss ya Dean (4THEWKN) & Kyle (KYOTA)!! 4THEWKN~9/17/2006 If it wasn't for you, I'd be driving something other than a Toyota! My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0 Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen