Junkyard Parts

[Volcom]

Anybody need anything Yota related???  There's a couple of Toyota trucks in the pull-n-save down here in Pueblo.  I've seen a couple of top shift T-cases laying around along with some random solid axle parts.  I think I'm going to pull a solid front axle housing / knuckles / spindles for a spare setup just in case.  I am also going to snag the only IFS steering box there for a spare. 

I pulled the rear tail gate off of an 87 4Runner to replace my dented one.  I also snagged the radio brackets to mount a radio / CB in the dash, full set of rear seat belts, and a shift boot for my crawler box.

Other parts I've seen there
86+ rear axle shaft (great for a spare)
86+ rear axle housing ( I don't know if it's straight, the leaf springs are bent up around it)
Random interior pieces
Steering reservoirs to make taller reservoirs for hydro assist setups
Stock PS hoses


On a personal note, I have an extra set of Aisin hubs (I have 2 extra sets but one is for me  ) for sale ($75)
Stock 84 steering and PS box - $20
Stock 84 rear axle housing and shafts (no 3rd member) - $25
Birfields from 84 (one has a sticky spot in it that makes it click on the trail but great for spares) - $30

If you guys need anything, let me know and we'll work something out!

[squirrel84]

I might need one set of those hubs

[Volcom]

I'm going to try and go pull a complete front axle from an 83.  I'll let it go for $200 no shipping. 

I am also going to go and pick up a set of stock steering knuckles, spindles, wheel hubs, and a housing for spares for myself. 

Anybody need anything??  There were several top shift cases laying around that I saw.

[REG535]

do you know if those top shifting t-cases are in good condition? intersted in two thanks.

[Volcom]

do you know if those top shifting t-cases are in good condition? intersted in two thanks.

As good as a junk yard t-case could be?  There were several still under the trucks and one was just sitting out in front of the truck (probably has some water in it after the rain). 

Are you local to CO?  I don't really feel like shipping something like a t-case (or 2).

[REG535]

ya i understand, i live in cortez, its a bit far to pueblo thanks though.

[sggirbyt]

I need some leaf springs for my 87 runner and a master cylinder/booster pump combo. I live in La Junta

[Volcom]

I need some leaf springs for my 87 runner and a master cylinder/booster pump combo. I live in La Junta

Stock rear 4Runner springs?  I'll check to see if they have a 4Runner there.  I'll also check on the MC / brake booster.  22RE or V-6?

[sggirbyt]

22RE, and yes the stock. I am trying to find a lift for it for cheap since I am not going to do an axle swap I figured I would be able to find one from somebody...

[4x4yota]

I am in need of an IFS rear Im in alamosa and could drive up there and get it or if you could show me the yard I can pull it

[Volcom]

I am in need of an IFS rear Im in alamosa and could drive up there and get it or if you could show me the yard I can pull it

I walked around there yesterday and didn't see an IFS rear.  Sorry.  I'll let you know if one pops up out there.

[4x4yota]

ok cool thanks

[REG535]

Do you have any transmissions, like a w-56?

[Volcom]

Do you have any transmissions, like a w-56?

I have a spare w56 in the garage I'd be willing to sell, $150.

[REG535]

cool. is there anything wrong with it? shift ok etc? do you have the bellhousing too, and shifter/knob. what year is the w56 you have? i need one to swap out my auto

[wakkjobb]

Dammit, I might have to start compiling parts from Pueblo since the local yards (Springs) are always picked clean... or someone pulls apart hubs for one little piece and tosses the rest on the ground  I hate that crap.

Got any springs I can replace/bolster my girl's 79s with? Fronts, they're starting to de-arch a bit.

Dan

[COToy91]

Dammit, I might have to start compiling parts from Pueblo since the local yards (Springs) are always picked clean... or someone pulls apart hubs for one little piece and tosses the rest on the ground  I hate that crap.

Got any springs I can replace/bolster my girl's 79s with? Fronts, they're starting to de-arch a bit.

Dan

http://jimsgotparts.com/    -- this guy is awesome

http://www.yotayard.com/about_us.htm    -- his ex wife owns this one (divorce put it in her hands)

[Russell_G]

I need a few parts but most hard to find.

Tacoma power window wiring,regulators and door pannels.....T100 3rz 2wd oil pan, Highlander mirror and visors...Ither then that i think i have it all.

I have a W59 trans i need to get rid of with case and boxes of random 22r and re parts im going to post up soon. PM me if you want the trans.

[Volcom]

cool. is there anything wrong with it? shift ok etc? do you have the bellhousing too, and shifter/knob. what year is the w56 you have? i need one to swap out my auto

I don't believe there is anything wrong with it.  It was in a parts truck that I bought for all the EFI stuff.  I already had a W56 from a previous purchase.  It does have the bellhousing and should have the shifter, I'll check that tonight and post back to you on that.  The W56 came out of an 85 4Runner.  This would be the tranny you would want for your swap.  You would also need a top-shift t-case since you can't use the t-case that attached to your auto.

Dammit, I might have to start compiling parts from Pueblo since the local yards (Springs) are always picked clean... or someone pulls apart hubs for one little piece and tosses the rest on the ground  I hate that crap.

Got any springs I can replace/bolster my girl's 79s with? Fronts, they're starting to de-arch a bit.

Dan

People pull the same crap down here.  I see parts of hubs and front axles taken apart the for the birfields and all the hub parts get lost or broken.

What kind of springs are you looking for?  A set of rears up front could gain back some lift on your girl's 79.  There's a couple threads on Marlin about it and a huge FAQ on Pirate about rears up front.  If you want to stick with stock fronts, I'll keep my eyes open.  Most of the time, the junkyard springs are just as de-arched.

[REG535]

Sweet. Let me know on the shifter and knob. I will take it though!  I been looking for a w56 from an 85 for a really long time. I already bought a 85' top shift t-case back in winter time. So I should be ready to go. 
sent u a pm

[uglyota]

how much are they asking for top shift cases?

[Volcom]

how much are they asking for top shift cases?

Last time I looked, they were @ $75-80.