Author Topic: 94 Toyota build-up ( FOR SALE... ) (Read 35493 times)

TIMS89CRAWLER · « **Reply #180 on:** Apr 22, 2008, 12:53:48 PM »

that pitman arm is death!!!! theyre only 69 bucks man

BigBs84 · « **Reply #181 on:** Apr 22, 2008, 12:57:18 PM »

:yikes:x2

DTB · « **Reply #182 on:** Apr 22, 2008, 01:00:18 PM »

86bobbedtoy · « **Reply #183 on:** Apr 22, 2008, 01:08:03 PM »

Id run it,
keep to low speeds for a while,
did you bevel the welded ends to get more penetration?

ToYocRawleR · « **Reply #184 on:** Apr 22, 2008, 01:36:38 PM »

Yea i beveld the

out of em and layed like three half inch beads on either side im just gonna use it temp. so i can move my truck.

ToYocRawleR · « **Reply #185 on:** Apr 22, 2008, 01:38:57 PM »

Got my front end on, tranny and tcase in.

86bobbedtoy · « **Reply #186 on:** Apr 22, 2008, 04:09:37 PM »

damn, things looking mean!

ToYocRawleR · « **Reply #187 on:** Apr 22, 2008, 05:44:48 PM »

yea wait till i start the exo....

will look bad!!!!!!!!!

Doof · « **Reply #188 on:** Apr 22, 2008, 05:50:19 PM »

looking good

im diggin the wooden blocks... im glad to see in not the only one using wood and shiz

ToYocRawleR · « **Reply #189 on:** Apr 22, 2008, 06:27:20 PM »

Yea bro if OSHA saw the

i was pullin theyd take my ass to the cleaners!!!!

Anyways got a piece of tubing bent up for the front stinger, probably try to get it welded on tomorrow cause its rainin all of a sudden.....lame!

ontherocks · « **Reply #190 on:** Apr 22, 2008, 09:34:01 PM »

Quote from: ToYocRawleR on Apr 22, 2008, 01:36:38 PM

Yea i beveld the out of em and layed like three half inch beads on either side im just gonna use it temp. so i can move my truck.

hey bro, i will drive next to ya down the highway at 75mph while you swerve back and forth if you say you trust it. i dont like it when people criticize others for showin they have a set of balls and say

like "thats disrespectful and dangerous, are you crazy?" they can stay off the road if they cant handle the heat. good ghetto fab!

$Beer Chug\'n$

THK Matt · « **Reply #191 on:** Apr 23, 2008, 01:41:39 AM »

man that front mouth on that thing.... looks SICK! best lookin grille/lights on a 3rd gen ive ever seen.

ToYocRawleR · « **Reply #192 on:** Apr 23, 2008, 06:35:01 AM »

Thanks guys! I have to shorten tie rods and the bead i layed around it was the only thing holding it together and i wheeld/ drove it for several months like that and to my knowledge its still being used...hahaha.

I have HIDs going in this biatch too!

DTB · « **Reply #193 on:** Apr 23, 2008, 06:48:46 AM »

Quote from: ontherocks on Apr 22, 2008, 09:34:01 PM

hey bro, i will drive next to ya down the highway at 75mph while you swerve back and forth if you say you trust it. i dont like it when people criticize others for showin they have a set of balls and say like "thats disrespectful and dangerous, are you crazy?" they can stay off the road if they cant handle the heat. good ghetto fab! $Beer Chug\'n$

I sure hope thats a joke!

So is it safe to drive this on the road with a welded pitman? it looks scary to me...but what do I know?

ontherocks · « **Reply #194 on:** Apr 23, 2008, 06:06:27 PM »

Quote from: DirToyBoy on Apr 23, 2008, 06:48:46 AM

I sure hope thats a joke!

So is it safe to drive this on the road with a welded pitman? it looks scary to me...but what do I know?

well like i said, if he trusts it i do. i dont discriminate against others fabrication, after all thats what fabrication is about, seein if or how well what you built works.

ToYocRawleR · « **Reply #195 on:** Apr 23, 2008, 06:20:51 PM »

Yea seriously, how do you know your front cross member wouldnt rip off going 60mph down the road??? Everything is " what if " I trust my work im not asking anyne else to.

Any ways heres the start to my bumper/ exo.

FRONT STINGER!!!!!!!!

ToYocRawleR · « **Reply #196 on:** Apr 23, 2008, 06:38:22 PM »

PICS

ToYocRawleR · « **Reply #197 on:** Apr 23, 2008, 07:28:57 PM »

What do you guys think? Might start the whole exo this weekend. At least the part over the bed and probably make up some sliderz~!

ontherocks · « **Reply #198 on:** Apr 23, 2008, 08:02:04 PM »

looks pimp, you gonna exo the cab?

ToYocRawleR · « **Reply #199 on:** Apr 23, 2008, 08:31:03 PM »

Yea, I might start it first, not sure yet how i want it though.

Thomas P · « **Reply #200 on:** Apr 23, 2008, 09:47:39 PM »

Hey when you do the cab cage, keep track of the cost involved, im wanting to get one going on my truck. Hey KC do you have a trailer or know where I can borrow on for the mud& crawl competition this weekend?

ToYocRawleR · « **Reply #201 on:** Apr 23, 2008, 10:42:31 PM »

Ok no prob, usually tubing is around $40 a stick, im guessing it will take around 5 sticks. As far as the trailer i dont have one i always have to borrow one, a guy i use to work with had a nice one but i dont talk much to him anymore.

DTB · « **Reply #202 on:** Apr 24, 2008, 09:44:26 AM »

Quote from: ToYocRawleR on Apr 23, 2008, 06:20:51 PM

YEverything is " what if " I trust my work im not asking anyne else to.

Thats a bad mentality to have.......and YES, you are asking all the people driving next to you on the street or bystanders and other wheelers on the trail to trust your work. Just something to think about

ToYocRawleR · « **Reply #203 on:** Apr 24, 2008, 03:19:49 PM »

Yea well toyota axle studs arent ment to run any thing bigger than a 33" tire according to les schwabbs but i see people all the time runnin 37s + and driving them on the road which is also putting bystanders and others on the road in danger. I wouldnt want a 37" tire comin at me at 50 mph, even if that pitman arm were to break theres still the hydro ram attached, Something else to think about.

ontherocks · « **Reply #204 on:** Apr 24, 2008, 06:14:29 PM »

Quote from: ToYocRawleR on Apr 24, 2008, 03:19:49 PM

Yea well toyota axle studs arent ment to run any thing bigger than a 33" tire according to les schwabbs but i see people all the time runnin 37s + and driving them on the road which is also putting bystanders and others on the road in danger. I wouldnt want a 37" tire comin at me at 50 mph, even if that pitman arm were to break theres still the hydro ram attached, Something else to think about.

i wanna keep track of your exo to, i might do it some day.

808 · « **Reply #205 on:** Apr 24, 2008, 08:50:47 PM »

i think me and kev are gonna come by tomoro and check it all out.
what time do you get off work?

ToYocRawleR · « **Reply #206 on:** Apr 24, 2008, 09:05:02 PM »

By 3:30. I think im gonna do more exo tubing on sunday.

86bobbedtoy · « **Reply #207 on:** Apr 27, 2008, 04:17:36 PM »

its sunday, anythin new?

ToYocRawleR · « **Reply #208 on:** Apr 27, 2008, 05:02:59 PM »

Notta, Been being hella lazy! Took the jet skis to the after bay yesterday and today just been loungin' around groovin my spare when i feel like it.

ToYocRawleR · « **Reply #209 on:** Apr 27, 2008, 07:20:18 PM »

Heres my progress pretty sick

ToYocRawleR [OP]

ToYocRawleR [OP]

ToYocRawleR [OP]

ToYocRawleR [OP]

ToYocRawleR [OP]

ToYocRawleR [OP]

ToYocRawleR [OP]

ToYocRawleR [OP]

ToYocRawleR [OP]

ToYocRawleR [OP]

ToYocRawleR [OP]

ToYocRawleR [OP]

ToYocRawleR [OP]

ToYocRawleR [OP]

Related Topics