Topic: shock suggestions 4 lifted toyota?

[Tallchevy]

superlift makes a 4" spring for our trucks it works good and the axle deosnt wrap up as much still stiff though

Had those on my 1 gen & it road like a tank. No give, just lift   

[BLACKDOG]

I say SAS,
take that stage II out and do a custom lift with... BJ spacers, Cranked torsions and a 3in marlin pack for the back.

you wont get a nice ride out of that IFS lift from procomp.... IMO that is

  I don't think you'll get a better ride from cranking your torsion bars.  That'll stiffen up the ride even more than the procomp lift. 

I've got the same lift on my truck, you just need to let it settle a little bit.  Once those bushing wear in, it'll ride a lot smoother.  To fix the rear, I'd go with some marlin springs, or even some f150 or chevy springs

[twistedtoy92]

i did a one inch  torsion crank and i felt a not as smooth ride for sure, but it did break the tb's in later

[allbones [OP]]

I am going to get the marlin kit for the front and the back![S.A.S]

[THK Matt]

  I don't think you'll get a better ride from cranking your torsion bars.  That'll stiffen up the ride even more than the procomp lift. 

I've got the same lift on my truck, you just need to let it settle a little bit.  Once those bushing wear in, it'll ride a lot smoother.  To fix the rear, I'd go with some marlin springs, or even some f150 or chevy springs

yeah that is true actually.
didnt think about that.

[THK Matt]

I am going to get the marlin kit for the front and the back![S.A.S]

Atta boy!
make a build up thread man.
post lots of pics.

[907yota]

Quit bringing up SUPERSTIFFS those will never help. SAS with some flexy springs from marlin or comparison is your only way to acheive a softer ride. It has nothing to do with shocks either.

he just put a procomp lift on his rig!!!

[907yota]

Had those on my 1 gen & it road like a tank. No give, just lift  

I agree they suck!!!! Sorry for even bringin um up... but he asked