ToyoTanners 1st gen pickemup truck

Started by toyotanner, November 19, 2007, 07:40:45 PM

0 Members and 1 Guest are viewing this topic.

46&2

85 4Runner Build  /  Cool Foreign Toyotas  /  Toyota: We Want Diesel FB Page    Rockcrawlintoy – i guess moms will put the pups up on the beach when they go fisting


coods

its def a bit taller. it looks sweet. am redoing my front springs putting some 2wd s10 springs up front see how it tall it sits and how it works out


toyotanner

Quote from: coods on June 23, 2009, 11:41:58 PM
its def a bit taller. it looks sweet. am redoing my front springs putting some 2wd s10 springs up front see how it tall it sits and how it works out


did you find another main leaf for the front yet?

Quote from: GrenadedToy on June 24, 2009, 11:58:29 AM
tailgate looks G

yeah i put dave to work haha

toyotanner

got seats back in with harnesses installed :sly:

finally got around to sheeting the floor still have to cap the front and back of it but all the hard stuff is done


i'm pretty much ready to WHEEL!!! all i have left to do is hit my dad up for some speakers so i have some tunes
my dad said he may have found me a fuel cell but i wont be putting that in til i get back  :driving:






rednk1980

Lookin good man giving me a little motivation to finish my junk
HOLD ON TIGHT! :driving: :hammerhead:
1983 Toyota SR5 long box bobbed 17" doved 14" bed cage, 22re, w56 tranny, working on dual cases 23 spline 4.70 twin sticks driveline disco. Dana 44 front, Dana 60 rear disk brakes and ff.

toyotanner

thanks :D ... yeah i bet you cant wait to get back and get crackin on that thing

rednk1980

ya man i got the stuff to finish my brakes just waiting to order my propane kit and a few other little odds and ends. Should have her done this winter sometime.
HOLD ON TIGHT! :driving: :hammerhead:
1983 Toyota SR5 long box bobbed 17" doved 14" bed cage, 22re, w56 tranny, working on dual cases 23 spline 4.70 twin sticks driveline disco. Dana 44 front, Dana 60 rear disk brakes and ff.

crawlerdan


toyotanner

Quote from: rednk1980 on July 02, 2009, 05:00:57 PM
ya man i got the stuff to finish my brakes just waiting to order my propane kit and a few other little odds and ends. Should have her done this winter sometime.

SWEET!

Quote from: crawlerdan on July 02, 2009, 07:21:17 PM
good lookin axle buddy ;)

isn't it? haha

toyotanner

just got back from 4 days at browns had alot of fun i didnt break at all...... got to run the new triple black diamond trail "airplane hill" its pretty sweet but i dont think it deserves 3 diamonds

TIMS89CRAWLER

Quote from: toyotanner on July 05, 2009, 09:25:21 PM
just got back from 4 days at browns had alot of fun i didnt break at all...... got to run the new triple black diamond trail "airplane hill" its pretty sweet but i dont think it deserves 3 diamonds
oh ya where is that one at?? where are all the pics?
Having a 12 second Honda is just like coming out of the closet; You're going to surprise a bunch of people, but in the end you're still gay.

www.choptechfab.com
www.myspace.com/choptechfab

1989 x-cab truck, 96 2rz swap, MC07-R10 duals w/flat belly, doved front, bobbed bed, all pro 5" springs F&R, lincoln locked F&R, 38.5" sx's and still at it!
CHECK THE BUILD
http://board.marlincrawler.com/index.php?topic=39494.0

toyotanner

its like in between 7 up and crushers its probably like 5 mins from 7up on the same road... i didnt get very many pics of myself so i have to wait for everyone else that was up there to load there pictures haha



GrenadedToy

Quote from: toyotanner on July 05, 2009, 09:25:21 PM
just got back from 4 days at browns had alot of fun i didnt break at all...... got to run the new triple black diamond trail "airplane hill" its pretty sweet but i dont think it deserves 3 diamonds
after it gets ran enough Im sure it will.

TIMS89CRAWLER

Quote from: toyotanner on July 06, 2009, 11:33:43 AM
its like in between 7 up and crushers its probably like 5 mins from 7up on the same road... i didnt get very many pics of myself so i have to wait for everyone else that was up there to load there pictures haha



oh nice... I will have to check that out next time I make it up there.... load the pics you have
Having a 12 second Honda is just like coming out of the closet; You're going to surprise a bunch of people, but in the end you're still gay.

www.choptechfab.com
www.myspace.com/choptechfab

1989 x-cab truck, 96 2rz swap, MC07-R10 duals w/flat belly, doved front, bobbed bed, all pro 5" springs F&R, lincoln locked F&R, 38.5" sx's and still at it!
CHECK THE BUILD
http://board.marlincrawler.com/index.php?topic=39494.0

toyotanner

this is what i have so far we also had 2 guys up there with good camera equipment that i havent got pics from yet






































Halladay

truck looks good  :biggthumpup: i should have came up and wheeled  :maddest:

TIMS89CRAWLER

thats sick man wish I could have made it....
Having a 12 second Honda is just like coming out of the closet; You're going to surprise a bunch of people, but in the end you're still gay.

www.choptechfab.com
www.myspace.com/choptechfab

1989 x-cab truck, 96 2rz swap, MC07-R10 duals w/flat belly, doved front, bobbed bed, all pro 5" springs F&R, lincoln locked F&R, 38.5" sx's and still at it!
CHECK THE BUILD
http://board.marlincrawler.com/index.php?topic=39494.0

toyotanner

Quote from: Halladay on July 07, 2009, 09:35:16 PM
truck looks good  :biggthumpup: i should have came up and wheeled  :maddest:

i know you need to man up haha
Quote from: TIMS89CRAWLER on July 07, 2009, 10:15:10 PM
thats sick man wish I could have made it....

for sure are you guys still planning to go to groundhog 24-26?


Halladay

adam wants me to go with him and if i get my duals put together im down for sure. but im not wasting my time going if im only single case lol

TIMS89CRAWLER

Quote from: toyotanner on July 07, 2009, 10:18:50 PM
i know you need to man up haha
for sure are you guys still planning to go to groundhog 24-26?


yep still goin over there.... cant wait man im ready to beat on my junk
Having a 12 second Honda is just like coming out of the closet; You're going to surprise a bunch of people, but in the end you're still gay.

www.choptechfab.com
www.myspace.com/choptechfab

1989 x-cab truck, 96 2rz swap, MC07-R10 duals w/flat belly, doved front, bobbed bed, all pro 5" springs F&R, lincoln locked F&R, 38.5" sx's and still at it!
CHECK THE BUILD
http://board.marlincrawler.com/index.php?topic=39494.0

toyotanner

Quote from: Halladay on July 07, 2009, 10:22:02 PM
adam wants me to go with him and if i get my duals put together im down for sure. but im not wasting my time going if im only single case lol

matt bechtol was single case locked front and rear w/ stock birfs and he did the trails

Quote from: TIMS89CRAWLER on July 07, 2009, 10:31:05 PM
yep still goin over there.... cant wait man im ready to beat on my junk

thats cool i'll see if i can make it down there hard part is finding something decent to tow with haha


Halladay

yea i here that guys wheels like his pedal is welded to the floor.... im locked front and rear with adams birf eliniators with the super joints so im one up on him i guess even though stock birfs are prolly just as strong  :eyebrow:

toyotanner

haha yeah but it was still cool that he was making it everywhere


TIMS89CRAWLER

ya hopefully you can make it over there with us its gonna be sick man!
Having a 12 second Honda is just like coming out of the closet; You're going to surprise a bunch of people, but in the end you're still gay.

www.choptechfab.com
www.myspace.com/choptechfab

1989 x-cab truck, 96 2rz swap, MC07-R10 duals w/flat belly, doved front, bobbed bed, all pro 5" springs F&R, lincoln locked F&R, 38.5" sx's and still at it!
CHECK THE BUILD
http://board.marlincrawler.com/index.php?topic=39494.0

Halladay

tanner...
i put a order in with trail gear for the x-member like yours. does it bring the cases up higher than a stock x-member or is it same hight?

toyotanner

i believe the cases sit the same height as it would stock but since the normal crossmember is like 3" tall and the trailgear one is 3/8"  you gain approx 2.5" of clearance