uh oh

red · June 28, 2007, 03:44:11 PM

i picked up an 87 4runner today!!

milla85 · June 28, 2007, 04:24:42 PM

PICS PICS PICS PICS

RK · June 28, 2007, 04:40:38 PM

we need visual verification.

Rocksurfer · June 28, 2007, 05:05:21 PM

How heavy is a 4Runner?

79coyotefrg · June 28, 2007, 06:03:31 PM

ITS ABOUT DANG TIME

Duffil · June 28, 2007, 08:17:12 PM

Just in case you didn't know,

red · June 28, 2007, 08:30:14 PM

haha i'll get pics up as soon as i can. its white and black with a very nice red interior. i have surface rust all over the frame i need to take care of, and an oil leak from the valve cover.

yes it is about time i get a yota

red · July 02, 2007, 12:41:30 PM

dang computer is given me problems loadin pics. got it a little dirty this weekend down at the lake.

86bobbedtoy · July 02, 2007, 11:10:36 PM

Your killin us, with your no pics.. just kiddin I hope to see pics soon.

jimbo74 · July 02, 2007, 11:14:47 PM

Quote from: 86bobbedtoy on July 02, 2007, 11:10:36 PM
Your killin us, with your no pics.. just kiddin I hope to see pics soon.

no, hes killing us with no pics....

red · July 03, 2007, 10:19:05 AM

here we go
http://s193.photobucket.com/albums/z277/redhead1987/?action=view&current=DSCN0179.jpg

weirdtimes_7 · July 03, 2007, 10:42:35 AM

Well i can't see photo bucket, but i can see the pic under it.. i like it... and ya, it's about time,

military_stang

red · July 03, 2007, 10:51:22 AM

haha hey at least pics are up now!!

plans-i need to go get an idler pulley (having a hard time finding one for my truck) so i have power steering, and i need to clean the rust off of the frame/fenders. not sure but do yall think it needs a bath now?

kneedownnate · July 03, 2007, 12:43:33 PM

Congrats

86bobbedtoy · July 03, 2007, 04:20:31 PM

Any plans on cuttin off that ifs crap?

red · July 03, 2007, 05:24:01 PM

ifs will go bye bye soon as i can get my hands on a solid front axle and steering parts. i can get 2 1/2" lift leaf springs for free so they will go on as well. 1st though i need to take care of the rust on the frame. i'll use bedliner to seal it up after the rust is removed so i dont have to worry about it again. after the rust is taken care of i'll probably buy a lock right locker for the rear axle unless i find a really good deal on the sas.

red · July 05, 2007, 09:22:56 AM

question, how well does a sand blaster work to remove rust and what media would be best to use?

86bobbedtoy · July 05, 2007, 01:52:51 PM

I say a da but it depends on your application. I have used a sand blaster a few times and personnaly would prefer some other way

red · July 05, 2007, 02:18:47 PM

i've used 2 different sand blasters before. one sucked, the other (different media) worked great.

86bobbedtoy · July 06, 2007, 09:14:37 AM

all you can do is try, if it dont work ohwell, if it works your in luck and hopefully it saves a little time.

red · July 12, 2007, 10:47:12 AM

well gmc sold last night for $1150.00

so now part of that money will go into the 4runner. any ideas on the order i should get parts in? plan overall is for about 5" of lift, 35" tires, lockers front/rear (arb if i can afford for the front), SAS, set of crawler gears for the t-case, t-case doubler, brake upgrade (i need a new master cylinder anyways, pedal doesnt engage until almost halfway down), swing out spare tire carrier, front/rear bumpers, and a winch.

welder2000 · July 12, 2007, 04:47:01 PM

SAS first, spend your money wisely

86bobbedtoy · July 12, 2007, 09:52:00 PM

any progress?

kneedownnate · July 12, 2007, 11:34:31 PM

So is either of these yours? http://s193.photobucket.com/albums/z277/redhead1987/?action=view&current=DSCN0088.jpg

90toy · July 13, 2007, 08:49:52 AM

haha i spotted a nipple slip

nice 4runner.

MiniSimp · July 13, 2007, 09:04:53 AM

Quote from: 90toy on July 13, 2007, 08:49:52 AM
haha i spotted a nipple slip

nice 4runner.

Me too!

What 4runner?

red · July 13, 2007, 10:27:28 AM

haha the brunett is my ex ashley. we were together for 2 1/2 years. that pic was taken back in september, we seperated back in march because she wants time alone, long story.

4runner progress, got the power steering working again, fixed the washer fluid reservoir because it had a small leak in it. now i need to order a new brake master cylinder because the brake pedal doesnt do anything until its about halfway down. and i need to get some paint. i'm going to clean up the entire underside of rust, then i'll take out the interior and repaint it to seal it up from any possible rust problems again. also need to get a new tailpipe because i cant pass smog without it grrrr. need a new seal for the top, the seal on the cab is in good shape but the seals on the top are gone, but that can wait for awhile.

red · July 13, 2007, 10:34:11 AM

nipple slip taken care of, i'll just add it to my private pics.

kneedownnate · July 13, 2007, 11:47:09 PM

I originally had the slip in the thread but removed it just incase

Had to save it for myself to see if I saw what I thought I did but don't worry, nobody but me sees the pics on my computer

red · July 14, 2007, 11:00:26 PM

hmm, better stay that way kneedownnate. she and i parted on good terms so no displayin lol! just got back from an offroading trip, man that rear bumper is a tin can!!!! i rolled back into a rock at maybe 2mph at most and the rear bumper curled up, looks like now i need to make a rear bumper/swingout spare tire carrier.

News:

uh oh