Colorado

[boggerunner]

wrong axle, the one from utec, the 14 or 12 bolt?

[GJToyotabug]

umm i need to check tomorrow it should be a 12 bolt 6 lug were just so busy recently i've been doing breaks like crazy. we kinda do lessons last week was disk breaks this week drum breaks and next week i think were starting leaf spring suspension so right now im kinda just sitting back and doing what im told kinda boring but good to move onto more advanced automotive 

[66cobra]

hey gjtoyo my runner is getting a new motor and the old one has 25k on a rebuild runs real good its a 22re will sell complete computer and all accessories it just doesn't have enough power for my likeing let me know it hasn't been pulled yet

[GJToyotabug]

hey 66cobra thanks but no thanks i have put to much money into this engine to give up on it now. im just gonna keep chuggin along with this one thanks though

[854RUN]

Dont know if yall are on the ORS email list but i just check mine and had an email from them, sad news  


ANNOUNCEMENT
12-5-08

As of 12-18-08 the Off Road Solutions facility, located at 6340 W. 56th Ave. #10 in Arvada Colorado, will be closed permanently. Through the 18th, business will continue as usual and we will complete every service job and deliver every parts order. After the 18th this website will remain online for access to technical information. Also, please periodically check the website as some of ORS’s unique product lines will soon be available through another outlet. This development will be announced on this website.

Most ORS parts will still be available online and from our business location until December 18th. Naturally, many of these will be on sale as we must liquidate some inventory. Please browse the website for any parts that may be of interest, they will still be found in their usual location. If a part has been removed, it is no longer available. Also, look at our Specials section for new and used parts, otherwise not found on the site, at clearance prices.

Again, please continue to periodically check this website as there will soon be additional information regarding the purchase of selected ORS parts through another outlet.

[suprawheeler]

if anyone in the colorado springs area on jan.11 its a sun .....call me if you wanna wheel off of old stage road.....719-306-1256

[COToy91]

if anyone in the colorado springs area on jan.11 its a sun .....call me if you wanna wheel off of old stage road.....719-306-1256

im close, any info on the trail

[854RUN]

I would be down but i am in the process of lowering my runner 3" . we need more info on the trial, i might be able to run Big T depending on the trail (trannys going out in it and it my dd)

[COToy91]

i googled it a bit, depending which trail off shoot we go on and the snow depth will determine the difficulty

[Volcom]

if anyone in the colorado springs area on jan.11 its a sun .....call me if you wanna wheel off of old stage road.....719-306-1256

Eagle Rock?  Saran Wrap?

[854RUN]

2009 4Runner Jamboree who is going? Volcom started a thread on it http://board.marlincrawler.com/index.php?topic=54392.0

[jarboarder1]

I plan on being there   

[COToy91]

So i decided that we as Coloradans are being lame and boring. No talk on our board for months and I dont think very many of us have ever met. So I am thinkin that we should all have a M&G or do a trail run sometime soon. Any ideas or takers

[wakkjobb]

I'm Dan from Colorado Springs; my g/friend has a 79 which threw up the 20R about a month after she bought it. Bought an engine-trans/t-case from an 88 4runner and 'made it fit'. We want to go wheeling but she has a bad back and I'm a little tall for that small cab. I'm trying to save for a 4Runner of my own so we can go camping and bring our dog. Aside from the newer engine her truck has 2" lift shackles in the front (for oil pan-axle clearance) and a 2" body lift; had to since we got a Weber--seller kept the EFI set-up.
If she's feeling better (some days are good, some are not so good) we'd be up for a meet but beware: her truck is super stock; no lockers or winch or knobby tires or rear bumper  .

Needs longer shocks too...




but it's been good so far. 

Dan

[COToy91]

nice 1st gen

[GJToyotabug]

looks good let me know personally if you need any lift parts or something like that i have access to many AOR parts, and boggerunner does too.

[Volcom]

So i decided that we as Coloradans are being lame and boring. No talk on our board for months and I dont think very many of us have ever met. So I am thinkin that we should all have a M&G or do a trail run sometime soon. Any ideas or takers

Colorado 4Runner Jamboree in July/August   

I agree we should try and have a trail run before then, I'm just giving you crap COToy91 

[Volcom]

I'm Dan from Colorado Springs; my g/friend has a 79

Clean 1st Gen!  Welcome to the CO section of the Marlin board!  I'm from Pueblo, 45 minutes south of you in Springs. 

[boggerunner]

so when are u city boys gonna make it over here to the western slope for some real wheeling?

[COToy91]

Colorado 4Runner Jamboree in July/August   

I agree we should try and have a trail run before then, I'm just giving you crap COToy91 

I made it last year, planing on it again this year

Maybe some sort of shake down run, something more moderate than carnage lol

[COToy91]

so when are u city boys gonna make it over here to the western slope for some real wheeling?

Ill come run 21 road with ya, never been on it but i wanted to try it

[boggerunner]

sounds good, its a fun trail

[854RUN]

So i decided that we as Coloradans are being lame and boring. No talk on our board for months and I don't think very many of us have ever met. So I am thinkin that we should all have a M&G or do a trail run sometime soon. Any ideas or takers

X2 i tried to get some talk going back in Feb and got one reply . i need to wheel my crap be for i rip it apart to build a ...... 

[boggerunner]

formula toy?

[COToy91]

formula toy?

when i destroy the body that what i want to do, i want a 4 seater though

[854RUN]

D-cab taco  , but  i wont get one till late this yr or next yr. But most likely the jamboree will be the last run i do in it than i will sell what i dont need witch will be every thing but the front axle and rear 3rd. so if any one wants a r 151 and duals, 4 bead locks, rear dice brake, rear axle set up for a 1link ext....

p.s. i will be selling my T100 also!!

[COToy91]

D-cab taco  , but  i wont get one till late this yr or next yr. But most likely the jamboree will be the last run i do in it than i will sell what i dont need witch will be every thing but the front axle and rear 3rd. so if any one wants a r 151 and duals, 4 bead locks, rear dice brake, rear axle set up for a 1link ext....

p.s. i will be selling my T100 also!!

dibs on bead locks lol

[COToy91]

oh and can i borrow that tap and some of your expertise on hydro assist

[854RUN]

you bet.  I am not helping re-torque 128 blots lol.

[COToy91]

you bet.  I am not helping re-torque 128 blots lol.

When i get back from school we should hit something local up again before i tear into some stuf again. I icked up an 88 sami with a turbo 2 weeks ago too lol, my fleet is growing