Author Topic: Colorado (Read 161499 times)

RED LINE · « **Reply #150 on:** May 22, 2008, 03:35:30 PM »

Im new here!!!

Im justin with red line landcruisers in the town....Calhan CO

COToy91 · « **Reply #151 on:** May 22, 2008, 06:06:31 PM »

Welcome not many cruisers on this board so its good to have you

to

COToy91 · « **Reply #152 on:** May 22, 2008, 06:09:27 PM »

And for any of those who might be on tis board in Northern Colorado, you are in my prayers and i am sorry if you experienced any losses with the storms that came through today.

On a lighter note, truck is broken....... again

RED LINE · « **Reply #153 on:** May 22, 2008, 07:47:25 PM »

well, we just got a 95 runner from canon city, apx 1 hr ago.. Plans include a partial x-o and 1 tons with a twin turbo small block!!, we'll also us it for prototypes and such!! FYI just in case

jarboarder1 · « **Reply #154 on:** May 22, 2008, 09:24:30 PM »

^ Now that sounds like a fun project.

dune_it86 · « **Reply #155 on:** May 23, 2008, 02:45:17 AM »

hey i have been tryin to move to colorado for like a few months now i was there 2 weeks ago to visit my gf but i am havin a killer hard time finding a good job! i have been an aero space tig welder for a little over 2 yrs but i have zero collage so no one seems to want me there! do u guys have any suggestions?

RED LINE · « **Reply #156 on:** May 23, 2008, 04:25:01 PM »

Quote from: dune_it86 on May 23, 2008, 02:45:17 AM

hey i have been tryin to move to colorado for like a few months now i was there 2 weeks ago to visit my gf but i am havin a killer hard time finding a good job! i have been an aero space tig welder for a little over 2 yrs but i have zero collage so no one seems to want me there! do u guys have any suggestions?

there is going to be a opening at RockWare Motorsports, pay will probably be apx 10$hr
talk to Matt peterson! ill check some other places and post them if i find them!!
colorado springs locations anyway if you have any interest!!

Volcom · « **Reply #157 on:** May 23, 2008, 09:00:34 PM »

Quote from: RED LINE on May 22, 2008, 03:35:30 PM

Im new here!!! Im justin with red line landcruisers in the town....Calhan CO

Glad you found us! Welcome

854RUN · « **Reply #158 on:** May 27, 2008, 06:29:35 AM »

Quote from: COToy91 on May 22, 2008, 06:09:27 PM

On a lighter note, truck is broken....... again

What did you do to your truck?

COToy91 · « **Reply #159 on:** May 27, 2008, 01:31:44 PM »

grenaded two hubs, went to yota yard today though and its back on the road

jarboarder1 · « **Reply #160 on:** May 27, 2008, 04:29:56 PM »

AH yota yard. They always have what Im looking for, too bad they always try and break me. How much did they charge you for them?

COToy91 · « **Reply #161 on:** May 27, 2008, 06:43:42 PM »

Lets say its a good thing i have an auto cause they took my right arm. Jim's yota parts of I-70 and Colorado Blvd., really nice guy, his ex wife owns yota yard and he got screwed in the divorce. Anyways i suggest going there instead of yota yard. Talk with him a bit and he will invite you to go wheel on his property

boggerunner · « **Reply #162 on:** May 27, 2008, 08:30:31 PM »

a couple of us are running billings this weekend if anyone wants to tag along, it will be my 3rd time this month, but ther is a new rock, so its kinda different.

Volcom · « **Reply #163 on:** May 27, 2008, 08:54:36 PM »

I've got two sets of stock Aisin Hubs for spares that I have collected over the years

You don't want to know what I paid for them a piece at a pull-n-save ($5/hub with all the hardware)

I will probably sell a set and keep a set as spares for myself.

GJToyotabug · « **Reply #164 on:** May 27, 2008, 09:08:48 PM »

hey do you have a phone # or web site for Jim's yota parts?

COToy91 · « **Reply #165 on:** May 27, 2008, 10:55:47 PM »

http://jimsgotparts.com/

jji · « **Reply #166 on:** May 31, 2008, 09:34:26 PM »

Hey wats up im Jarboarder's little bro. We are building the 91 extra cab. I've got shotgun in the truck. Hopefully we will be seein you around the trail soon $Beer Chug\'n$

KDC · « **Reply #167 on:** Jun 03, 2008, 11:03:57 AM »

Quote from: COToy91 on May 27, 2008, 06:43:42 PM

Lets say its a good thing i have an auto cause they took my right arm. Jim's yota parts of I-70 and Colorado Blvd., really nice guy, his ex wife owns yota yard and he got screwed in the divorce. Anyways i suggest going there instead of yota yard. Talk with him a bit and he will invite you to go wheel on his property

x2 He is a great guy and a fellow wheeler!

boggerunner · « **Reply #168 on:** Jun 05, 2008, 10:36:20 PM »

so when are any of u gonna make it over to the western slope to go wheeling?

COToy91 · « **Reply #169 on:** Jun 06, 2008, 05:57:47 PM »

when i install the york OBA i am working on, get my longs in the mail and re-assemble my entire front axle

854RUN · « **Reply #170 on:** Jun 09, 2008, 07:01:13 AM »

ooooooo longs

. I still need a cage then i can think about longs, until then not having longs help keep me on at least 2 wheels

Volcom · « **Reply #171 on:** Jun 09, 2008, 12:10:28 PM »

Quote from: boggerunner on Jun 05, 2008, 10:36:20 PM

so when are any of u gonna make it over to the western slope to go wheeling?

I'd love to but I don't see it happening this summer

854RUN · « **Reply #172 on:** Jun 09, 2008, 03:39:36 PM »

Hey Volcom how are the 40's workin out for you??

COToy91 · « **Reply #173 on:** Jun 09, 2008, 08:25:30 PM »

I need money thats all i have to say

RED LINE · « **Reply #174 on:** Jun 09, 2008, 08:46:40 PM »

Quote from: 854RUN on Jun 09, 2008, 07:01:13 AM

ooooooo longs . I still need a cage then i can think about longs, until then not having longs help keep me on at least 2 wheels

are you in need of a cage builder?

we have some ideas we want to try for some runners. if your interested!

Volcom · « **Reply #175 on:** Jun 09, 2008, 10:59:52 PM »

Quote from: 854RUN on Jun 09, 2008, 03:39:36 PM

Hey Volcom how are the 40's workin out for you??

The first trip out on the 40's is this Saturday!!! I'm going to run Indy-Liberty (easier of the 2 trails). I want to make sure everything is working out and I've got enough cut before taking it out on Patriot (plus I need to build some bumpers and a cage)

I'll post pics after the run! I'm excited, I haven't been wheeling since November last year.

854RUN · « **Reply #176 on:** Jun 10, 2008, 08:02:58 AM »

Quote from: RED LINE on Jun 09, 2008, 08:46:40 PM

are you in need of a cage builder?

we have some ideas we want to try for some runners. if your interested!

very very interested i will be your ginnie pig.

pm sent

COToy91 · « **Reply #177 on:** Jun 12, 2008, 10:36:20 PM »

LONGFIELDS are coming in on Monday or Tuesday, to bad FROR is out of stock on ARP hub studs.... Got th knuckle ones though and i gusseted the

out of my front axle, in the process of putting it all back together with new seals and gaskets

COToy91 · « **Reply #178 on:** Jun 12, 2008, 10:41:12 PM »

Still the same old school longs you say? Why yes i have those too

COToy91 · « **Reply #179 on:** Jun 12, 2008, 10:46:04 PM »

Oh yea and here is my DD

Related Topics