16 inch lift with stock springs!

Started by 8D3TOY, September 17, 2006, 01:00:37 PM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2
User actions

86turboyota

#30
September 20, 2006, 04:15:12 PM
Quote from: Infernal on September 20, 2006, 11:41:45 AM
   :joke:  I saw that thing in the Truck Trader.He's really local to me.I should call him up,go take a look at it and snap some more shots of it.
that would be awsome...
My Build 1986 4runner SAS 36s etc
http://board.marlincrawler.com/index.php?topic=22625.0

"Later, I learned that even though I engage 4WD my hubs are not automatically locking? Something about manual locking hubs I think. What's manual mean? I need to read a manual to lock them? lol  So I found these neat autolocking hubs and installed them. Sometimes they dont stay locked while I am backing up, but that's fine because I dont have a backup camera to see where Im going (like our RV) so I just simply dont ever back up"- BigMike

BLACKDOG

#31
September 20, 2006, 04:21:43 PM
Quote from: blackdiamond on September 20, 2006, 11:52:28 AM
I'm thinking that he needs some large truck nutz hanging from the transfer case to lower the center of gravity.   :hammerhead:

:rofl2: 

:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

toytank

#32
September 20, 2006, 06:12:10 PM
why would you do that
old and sqeaky but she goes

Duffil

#33
September 20, 2006, 11:19:39 PM
Quote from: toytank on September 20, 2006, 06:12:10 PM
why would you do that
Pure, unadulterated, mall-crawling ingorance, combined with a need for a tall, unfunctionng  vehicle.

BLACKDOG

#34
September 20, 2006, 11:44:46 PM
Quote from: Duffil on September 20, 2006, 11:19:39 PM
Pure, unadulterated, mall-crawling ingorance, combined with a need for a tall, unfunctionng  vehicle.

He's trying to eliminate fat chicks from his life, because remember "fat chicks can't jump"
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

Duffil

#35
September 20, 2006, 11:59:16 PM
 :funny: :rofl:

Wermz84

#36
September 21, 2006, 08:29:58 AM
Quote from: BLACKDOG on September 20, 2006, 11:44:46 PM
He's trying to eliminate fat chicks from his life, because remember "fat chicks can't jump"

:rofl2:


There has to be an easier way to do this while keeping a functional truck..   


:think:  More exo tubing, cause they can't squeeze through tiny spaces either..  :talkingn:
I like to Drive!

unclejpl4x4

#37
September 21, 2006, 03:44:42 PM
:rofl:
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

Yota87Truck

#38
September 27, 2006, 08:41:17 PM
How could someone screw up a yota that bad, and man what was he smoking?

madhunt

#39
September 29, 2006, 03:45:38 PM
 :yikes: :hammer: :screwy: :headscratch: :dunno: :hammerhead: ??? :reg:  what was he thinkin that is just wrong!!!!!! :smack:
HIGH AND TIGHT OFFROAD

prang11

#40
September 29, 2006, 03:51:04 PM
I know what I am saving my $$ for  :D
85 Toyota Pickup, with a sweet hurst shifter!

22R, 33s, 5.29, locked rear, 3" wider, slow.

Gittinit

#41
September 30, 2006, 05:56:02 PM
I'm really interewsted in buying this truck. Is it true that marlin crossover adds 30 horsepower? Can I fit 44''  tires with16'' of lift. do ya think some flames painted on the side would help me get a date? Will this truck be capeable of a 100 mile commute. Who knows where I can get a really tall hood scoop for it? I'm plannin on green neon for the underside too what do ya think (mabye pink?)


:stopit: :stopit: :stopit: :stopit: :stopit: :stopit: :stopit:


Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

Lady Di

#42
September 30, 2006, 06:45:23 PM
 :rofl2:  :rofl:  OMG! This is the first I have seen of this! This is so wrong and the best part is... no front driveshaft!
I never got o pirate but I have to see what went on there with that thread.
Infernal, I really wish you would go by and snap some more :snapshot:
Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

rednk1980

#43
September 30, 2006, 06:57:28 PM
 WOW  :headscratch:
HOLD ON TIGHT! :driving: :hammerhead:
1983 Toyota SR5 long box bobbed 17" doved 14" bed cage, 22re, w56 tranny, working on dual cases 23 spline 4.70 twin sticks driveline disco. Dana 44 front, Dana 60 rear disk brakes and ff.

84_yota_4wd

#44
October 08, 2006, 10:38:45 PM
I THINK I JUST DIED A LITTLE INSIDE :red_eyes:
Marlin Crawler
Developers of the longest lasting and most successful
Toyota Transfer case, Transmission, and Differential products on the planet
(888) 94-CRAWL / 888-942-7295

zeke jr.

#45
October 08, 2006, 10:41:13 PM
 :rofl2:
its love at first sight.




always remember a crowded elevator smells different to a midget.

"I sincerely believe that banking establishments are more dangerous than standing armies, and that the principle of spending money to be paid by posterity, under the name of funding, is but swindling futurity on a large scale."

"The end of democracy and the defeat of the American Revolution will occur when government falls into the hands of lending institutions and moneyed incorporations."

Wermz84

#46
October 08, 2006, 10:41:40 PM
Quote from: 84_yota_4wd on October 08, 2006, 10:38:45 PM
I THINK I JUST DIED A LITTLE INSIDE :red_eyes:

:haha:


We all DID!
I like to Drive!

motorider228

#47
October 08, 2006, 11:14:44 PM
I don't know what you are all talking about, I like it.










:rofl2:

topar

#48
October 08, 2006, 11:33:49 PM
:tantrum: :tantrum: Now I have to cancel my trip across America to buy that truck out of fear you guys will make fun of me.  Maybe I will just buy the shackels Oh Yeah!  :bowdown:

84_yota_4wd

#49
October 09, 2006, 02:10:25 PM
u guys know where he the idea right. Ive seen this done on chevys.  like stupid mall cruzers.  somebody needs to save that yoda. i hurts to see fellow trucks in such dire need of a owner change.
Marlin Crawler
Developers of the longest lasting and most successful
Toyota Transfer case, Transmission, and Differential products on the planet
(888) 94-CRAWL / 888-942-7295

86turboyota

#50
October 09, 2006, 07:46:13 PM
has anyone contacted this guy yet?
My Build 1986 4runner SAS 36s etc
http://board.marlincrawler.com/index.php?topic=22625.0

"Later, I learned that even though I engage 4WD my hubs are not automatically locking? Something about manual locking hubs I think. What's manual mean? I need to read a manual to lock them? lol  So I found these neat autolocking hubs and installed them. Sometimes they dont stay locked while I am backing up, but that's fine because I dont have a backup camera to see where Im going (like our RV) so I just simply dont ever back up"- BigMike

DTB

#51
October 09, 2006, 07:51:38 PM
Quote from: 86turboyota on October 09, 2006, 07:46:13 PM
has anyone contacted this guy yet?
Quote from: 79Coyotefrg on September 17, 2006, 05:12:26 PM
i couldnt resist,  i just called  , went to voice mail,  i asked if  there was alot of high water in their area :rofl:
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

RAZOR

#52
October 10, 2006, 12:15:01 AM Last Edit: October 10, 2006, 12:58:01 PM by FordFreakChik
Poor Truck, I hope it can be fixed.

Quote from: BLACKDOG on September 20, 2006, 11:44:46 PM
He's trying to eliminate fat chicks from his life, because remember "fat chicks can't jump"

I love that Joke- " Lift it, Fat Chicks Can't Jump " 
I put that in The Marlin Sticker Thread.
Finally Straight Axled, e-Locker, 5.29's, Lockright Rear, 13" travel tractor spline driveshaft, CV eliminator, Fully Gusseted front axle, Marlins almighty 5" Trail Flex lift Kit, 36" TSL's

In Marlin Crawler, I trust.
If you got the Nuts, Follow my Ruts!
Lift It, Fat Chicks Can't Jump!
Motocross, Because it Requires 2!

yotamckimboy4x4

#53
October 10, 2006, 03:06:50 PM
wow that has got to be the dumbest thing i have ever seen.
"We ride together, We die together, YOTABOYS FOR LIFE"    85 toy pickup 5 inch springs 2inch body lift, 36" IROKS, custom front bumper
"HOLD ON TIGHT"

burnyota

#54
October 10, 2006, 05:05:43 PM
you must be this tall to ride this ride........my god wtf :think:
85 p/u, marlin#208, built 22R on propane, old school longs, 5.29's / detroits, bobbed, chopped, and flopped
Print
Go Up Pages 1 2
User actions