my new 90 supra 7M-GTE

[BLACKDOG]

lol well I stopped at home depot  and looked at rubber toilet couplers  for the intake hose   3" was 2 big and 2" was 2 small.  for 6$ if it fit  who cares right............ I'll keep looking

ask supermat how he fixed his cracked intake hose problem
He wrapped the intake with ducttape until the fitting he bought would fit over it, then he taped it on there

[reklund5]

FYI:  The rubber accordian hose from the AFM to the turbo inlet is only like $30 at the dealer, if you ask for one for a 1992 Supra.  For some reason, they have a different part number and are cheaper.  The earlier ones are EXACTLY the same, but cost like $80.

See, I told you that it'll sap every last cent out of you!

Here's mine:

Ryan

[unclejpl4x4]

well i just put on my duck work i had on my CPU  just 2 start the car  and it sounds nice. 
I tried driving 2 the next block  and i was not really on it. and Pop  off it came    had 2 walk 2 the hose (not far) and grab the screw driver 2 fix it  and my truck 2 jump the PoS free battery i got. 
  just have it idling in the driveway way now it sounds so mean. OMG I LOVE THAT BOOST  Pop!!!

LoL a cop drove by 2 and did not even look ( no tags/registration)   + 2  

[GOT MUD?]

NICE PIECE OF CRAP, IT'S ALL YOU UNCLEPJ OH, BY THE WAY CAN YOU ACTUALLY FIT INSIDE IT WITHOUT CRISCO..  HHAHAHAHAHAHA  GOOD LUCK WITH IT, IF YOU CAN'T GET IT FIXED I WILL BE MORE THAN HAPPY TO ROCK CRAWL OVER IT WITH MY JEEP.

[unclejpl4x4]

NICE PIECE OF CRAP, IT'S ALL YOU UNCLEPJ OH, BY THE WAY CAN YOU ACTUALLY FIT INSIDE IT WITHOUT CRISCO..  HHAHAHAHAHAHA  GOOD LUCK WITH IT, IF YOU CAN'T GET IT FIXED I WILL BE MORE THAN HAPPY TO ROCK CRAWL OVER IT WITH MY JEEP.

  I u 2 DJ   

[unclejpl4x4]

well i just clean out the car    looks so much nicer still a mess tho

This pic is dark my camra is pooping out it's sunny out side

[unclejpl4x4]

Update:   I was gona do it in the stones  but my buddy was NO  so i used 2 car ramps up front and jack/stands in the rear.   Well atleat one of my Toys  fits in the garage.


Order a down pipe for the car off of E-bay 92$ total. Took less  then a hr 2 put on.  Just had 2 pull off what was left of the old one.   The only problem  was i had 2 run 2 the hard ware store 2 pick up a 3/8 swivel.

Also played with the SAFC   Lo-idle was set at 25%    So u turned it down 2 15% and i also defueled 5000rpm range by 2%    left the boot comp on #3.  Most of my loading up problem went away.  still needs a real road test and not just a peddle mash  2 the corner.   

my mom just talked 2 the naibor they where complaning about the car     Guess they can't take a little boost.

[DTB]

my mom just talked 2 the naibor they where complaning about the car     Guess they can't take a little boost.

hahaha screw the neighbors!!! Looking good Joe   

[unclejpl4x4]

orderd the 3" HP cat  and cat back pipes 491$  and thats the cheap ones

also picked up a fuel filter.... lol it's the same as whats on my 93 pickup

[GoaT]

haha sweet!

[DTB]

orderd the 3" HP cat  and cat back pipes 491$  and thats the cheap ones

also picked up a fuel filter.... lol it's the same as whats on my 93 pickup

u should know that by now

[unclejpl4x4]

u should know that by now

but i just orderd them i can't take pics if there not here 

[DTB]

but i just orderd them i can't take pics if there not here 

well dont tell us if u cant back it up with pictures. some of us are visual learners

[GoaT]

well dont tell us if u cant back it up with pictures. some of us are visual learners

lmao

[unclejpl4x4]

cat came in 2 day   NO gaskest tho 

dam that cat looks hot in my bed     




for DTB  

[DTB]

dam that cat looks hot in my bed     



 

I don't even want to know why that's in yer bed. Probably the same reason FFC keeps tools in her underwear drawer

[BLACKDOG]

I don't even want to know why that's in yer bed. Probably the same reason FFC keeps tools in her underwear drawer

[unclejpl4x4]

I don't even want to know why that's in yer bed. Probably the same reason FFC keeps tools in her underwear drawer

well i have a theory on that.
most peoples dresser top draw is the undies draw
See we guys leave tools around the room (my dresser tools on top- first draw undies)
NOW FFC has tools in her room but women like nice/neat  so instead of the tools on top she puts them in the draw

[unclejpl4x4]

it only took 6weeks 2 get but there here

[unclejpl4x4]

ok exaust is mounted  very easy 2 do.
still need a muffler and more hangers

[milla85]

Did i here someone say free? Take it man!

[BLACKDOG]

my bf has a 7mgte (with a blown headgasket, of course) if you want it for parts. pm me if you're interested! and btw, you're a lucky b*std, because i've wanted a supra for ever!

Too bad he's in NJ huh?

[...................................]

Too bad he's in NJ huh?

Huh? I work with my bf. And about the engine...he DID have it available for sale, until I found a $400 87 supra for sale here in sac...we're gonna replace the head gasket and drop it into my supra instead. Sorry! However, the engine we'll be pulling out of mine will be available in a little bit, if you still need any parts.

[reklund5]

Have I taught you guys nothing? 

Supras are a silly waste of money!  I should know...  Sell them NOW while they run and the HG's aren't blown...

I'm so deep into mine that I don't think I could ever sell it.  The first person to offer me $10,000 for it can take it away! 

Since they're so much fun, and nobody listens to me anyway, PM me when you're ready to really make 'em go fast- I seem to have figured that out a few years, and a few transmissions ago.

Ryan

[unclejpl4x4]

[...................................]

oh? well...Ive got the HKS metal head gasket all set for this one, 3" downpipe, custom exhaust, and HKS blowoff valve included...so hopefully it'll be pretty nice once it's all said and done.

[unclejpl4x4]

NJ state div of taxation sent me a notice saying i ow them 235$ in taxes  cause they sat the cars  worth 4,000 $      looks like i got some anti gov protes 2 stage.  im so sick of this corupt gov. 

[boggerunner]

i have an 86 supra with a blown head gasket, so im buildin a 1/4 mile car, and its gettin a turbo with stand alone fuel management, i origionally bought it for the motor for my 4runner, but i love driving the car, the motor is in pieces in the garage

[reklund5]

oh? well...Ive got the HKS metal head gasket all set for this one, 3" downpipe, custom exhaust, and HKS blowoff valve included...so hopefully it'll be pretty nice once it's all said and done.

You're headed down the right road for sure!  Get some ARP headstuds, and do the HG job right!  Also, look into lapping the block while the head's off to ensure a good seal. I'm running a 1.5mm Greddy metal head gasket on mine, which lowered the c/r a little bit.  Torqued the studs to 85 ft/lbs, and I blow 25 PSI thru it all day long and it LOVES it.  The stock headbolts just won't be up to the task...

Ryan

[unclejpl4x4]

yes that is one of the upgrages thats on the list of things 2 do. im just scard of what i'll find in the proccess.