Kris SAS build

Started by Kris, December 12, 2005, 04:22:12 PM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1 2
User actions

Kris

December 12, 2005, 04:22:12 PM
I got my axel from Glen the other day.  I tore down one side of the axel today and found a problem.  The problem is the king pin bearing gave out and ate the inner race and the leading edge of the housing where the race goes.  I think I can fix it with some emery cloth and smooth it out.  I have no clue what ate the inside of the housing.  It should be OK I think it is no big deal I will sand that smooth and it will be OK.  Any suggestion on how to fix the leading edge would be appreciated.
Better to be judged by twelve than carried by six!!

You can grow, You can hide it, You can build it:
BUT WE WILL FIND IT!!  K-9

Kris

#1
December 12, 2005, 04:22:54 PM
Another pic.
Better to be judged by twelve than carried by six!!

You can grow, You can hide it, You can build it:
BUT WE WILL FIND IT!!  K-9

Kris

#2
December 12, 2005, 04:26:53 PM
One last thing.  Where can I get a oil seal retainer.  It is the two peice metal retainer that goes on the back of the knuckle to hold on the gasket.  The one I have is all bent up.
Better to be judged by twelve than carried by six!!

You can grow, You can hide it, You can build it:
BUT WE WILL FIND IT!!  K-9

79coyotefrg

#3
December 12, 2005, 04:39:19 PM
i have one i can drop in the mail,   i cant tell from the pic,  i think those bearing races come out
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Kris

#4
December 12, 2005, 04:53:38 PM
the race is out it is just the leading edge is gouge a little but if I put a new race in it should be fine
Better to be judged by twelve than carried by six!!

You can grow, You can hide it, You can build it:
BUT WE WILL FIND IT!!  K-9

79coyotefrg

#5
December 12, 2005, 05:10:08 PM
email me your address and i'll drop a retainer hicky in the mail
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Kris

#6
December 13, 2005, 07:10:59 AM
Glen i need thatr oil retainer and one bolt that goes to hold it on the back of the knuckle.  The driver side was all bent up and missing one bolt.  Thanks for the help.
Better to be judged by twelve than carried by six!!

You can grow, You can hide it, You can build it:
BUT WE WILL FIND IT!!  K-9

79coyotefrg

#7
December 13, 2005, 08:51:02 AM
:thumbs:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Kris

#8
May 09, 2006, 04:40:47 AM
Have not wrote any updates in a while.  I finally got all the parts to build the front end.  I cleaned the housing and cut off all the brackets and painted the parts.  I will take pics later and post them.  I was just about to call and order my sas from Marlin and duty called.  I got orders to go back to Iraq.  So I guess this will be on hold till I get back.
Better to be judged by twelve than carried by six!!

You can grow, You can hide it, You can build it:
BUT WE WILL FIND IT!!  K-9

79coyotefrg

#9
May 09, 2006, 07:55:31 AM
OH Kris,  dang man that sucks,  you take care of yourself  and make sure and keep intouch with us from over there :usa:

hows the little sweety liking her blanket
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

854RUN

#10
May 09, 2006, 09:59:22 AM
KICK SOME A$$  :kickbutt: :boxing: and come home safe :usa: :usa: :usa: :usa:
1985 4RUNNER (rip) http://board.marlincrawler.com/index.php?topic=54940.0

1997 T100, 4.88, DUAL T-CASE, R151, lockright in the rear, Alcan springs, 37"S, Bobbed 15", 3.4L TRD Supercharger, JBL headers 
http://board.marlincrawler.com/index.php?topic=35174.0

"When the power of love overcomes the love of power the world will know peace" Jimmy Hendrix

-JOSH-

Rocksurfer

#11
May 09, 2006, 10:03:32 AM
We'll be waiting for the next update on your build.  :usa:
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

Kris

#12
May 09, 2006, 04:33:13 PM
she loves the blanket sleeps with it every night.  Thank for all the support for you guy as soon as I get there I will post some pic of the sight and sounds.
Better to be judged by twelve than carried by six!!

You can grow, You can hide it, You can build it:
BUT WE WILL FIND IT!!  K-9

burnyota

#13
May 09, 2006, 06:55:45 PM
how about that mean dog? immean nice puppy?
85 p/u, marlin#208, built 22R on propane, old school longs, 5.29's / detroits, bobbed, chopped, and flopped

79coyotefrg

#14
May 09, 2006, 07:06:02 PM
Quote from: Kris on May 09, 2006, 04:33:13 PM
she loves the blanket sleeps with it every night.  Thank for all the support for you guy as soon as I get there I will post some pic of the sight and sounds.
Mom says shes glad she likes it,  i cant remember which one she got, but i KNOW she didnt want the flowers  :rofl:

"flowers die all the time"   :rofl2:  shes such a cutie

take care of your self over there, we'll be praying for ya
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#15
November 28, 2006, 12:53:55 PM Last Edit: November 28, 2006, 01:10:54 PM by 79Coyotefrg
 :attention:  :woohoo:  :usa:  :cheer:   :party:  :woohoo:


                           
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

weirdtimes_7

#16
November 28, 2006, 01:20:21 PM
When did he get back???

military_stang
:respect:

brc

#17
December 01, 2006, 01:52:54 PM
I will be over ther with you I leave in Jan so maybe we will bump into each other.

BRC
1999 CTD 2500 Sport TST/MBRP/AFE/K&N and Quadzilla 315's yada-yada-yada
1985 Four runner 5in lift 35's lockers etc.
1973 FJ buggy project INWK 3RZ SM420 Mini Axles and Aluminum tub/cowl building to be light weight

weirdtimes_7

#18
December 01, 2006, 02:35:19 PM
Well i might be going in Jan. but don't know yet... the chance's are slim right now. But i deff. will be going in July time frame... so mabey we will bump into each other, lol

military_stang
:respect:

79coyotefrg

#19
December 01, 2006, 03:49:17 PM
Quote from: military_stang on November 28, 2006, 01:20:21 PM
When did he get back???

military_stang
:respect:
thanksgiving day i think  :dunno:


he hasnt been back so he must be  :bumpinbutts:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Evilsister

#20
December 10, 2006, 09:45:30 AM
 
"Any time is train time."

Kris

#21
December 10, 2006, 10:41:35 AM
I know it has been a long time for any updates but have been busy doing other things.  I also just found out that I am moving.  I got orders to Japan.  So it looks like The project is on hold.  :( I will have to sell the truck and parts I have because I can't take them to Japan.  :inthedark: SO If any one needs a front axel let me know.  I have it all broke down and have order all new parts for it .  The truck is a 93 3.0 Ext cab, and the axel I think is out of a 83.
Better to be judged by twelve than carried by six!!

You can grow, You can hide it, You can build it:
BUT WE WILL FIND IT!!  K-9

79coyotefrg

#22
December 10, 2006, 10:48:17 AM
:thud:   your kidding me  :thud:


when you got to go ??

you want to  store the truck here ??   i can  start it up  and drive it  occasionally  and you'll still have it when you come home,   what 1 year??  2 years??
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Kris

#23
December 10, 2006, 11:03:32 AM
4 year tour with the family.  I am going to sell it  :rivers: and get a new project when I get home
Better to be judged by twelve than carried by six!!

You can grow, You can hide it, You can build it:
BUT WE WILL FIND IT!!  K-9

79coyotefrg

#24
December 10, 2006, 11:06:09 AM
:down:   

well if you change your mind  just give me  a hollar  i would be  proud  to  help you serve  :usa: 
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

alwayzbroken

#25
December 10, 2006, 11:11:24 AM
How much do you want for the front axle?
If you still have control you aren't going fast enough

79coyotefrg

#26
December 10, 2006, 11:14:13 AM
just told Mom  about  it ,  she said to bring it up  and we will take care  for you.   and that "she"   wouldnt drive it much  :eek:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Kris

#27
December 14, 2006, 03:29:46 PM
going to just sell it and get a new one when I get home.  So if you know anyone who wants her let me know. 
Better to be judged by twelve than carried by six!!

You can grow, You can hide it, You can build it:
BUT WE WILL FIND IT!!  K-9

79coyotefrg

#28
December 14, 2006, 04:17:21 PM
how much for the truck Kris??
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Kris

#29
December 14, 2006, 05:30:27 PM Last Edit: December 16, 2006, 07:22:24 AM by Kris
I will sell the truck with the axel and the 500  in patrs I have for 6000 obo If you know anyone who wants it let me know.  I will also list the parts I have for the axel if someone wants to know.  If anyone needs info on the truck let me know.  I realy need to sell her.
Better to be judged by twelve than carried by six!!

You can grow, You can hide it, You can build it:
BUT WE WILL FIND IT!!  K-9
Print
Go Up Pages1 2
User actions